본 연구에서는 열유도상분리법으로 제조한 polyvinylidene fluoride (PVDF) 중공사막의 오염성과 화학적 세척에 대한 실험을 진행하였다. 오염수는 소 혈청 단백질(bovine serum albumin, BSA)과 카올린(kaolin)을 이용해 제조하였으며, 차아 염소산나트륨(NaOCl), 구연산(citric acid), 황산(H2SO4)으로 화학적 세척을 진행한 후 뒤 표면 전하 분석기, 주사전자현미경 (scanning electron microscope, SEM) 그리고 에너지 분산 X선 분광법(energy dispersive X-ray spectroscopy, EDX)을 통해 세 척 효율을 평가하였다. PVDF 분리막은 높은 내화학성과 열적 안정성을 가지는 분리막으로 화학적 세척을 진행한 결과 가장 좋은 효율은 차아염소산나트륨으로 세척한 것으로 그 결과 투과도는 793.2 L/(m2.h.bar)로 초기 투과량인 945.3 L/(m2.h.bar) 값과 비교하였을 때 약 84% 회복률을 보여주었다. 이는 수처리 공정에서의 막 오염 방지 및 세척의 중요성을 제시한다.

In this study, 41 individuals in 7 locations within CP, MG, UC, and DN map sheets were observed. The MG map sheet had the highest number (n=13) of individuals, while the CP-3 site on the CP map sheet had the lowest number (n=1) of individuals. Land use analysis indicated that the MG site with the highest number of individuals had a high percentage (70.56%) of forest land areas with a small percentage (12.63%) of farmland areas. The CP-3 site with the lowest number of individuals had a small percentage (26.47%) of farmland areas. It also had the highest percentage (32.13%) of residential and commercial areas, covering 19,616 m2. Measurement results of the physical habitat environment for B. karubei indicated a mean substrate of -2.1 (Φm), an average water depth of 63.0 cm, and a flow velocity of 0.2 m s-1. The association rule analysis for co-occurring species revealed that Semisulcospira coreana, Ecdyonurus kibunensis, and Goera japonica had the highest associations among lotic species, while Limnodrilus gotoi and Calopteryx japonica demonstrated the highest association among lentic species.

The Indoor Air Quality Control Act aims to regulate indoor air quality (IAQ) to safeguard public health and promote a comfortable living environment. This law encompasses multi-use facilities, newly constructed residential complexes, and public transportation vehicles. The law also involves mandating air quality standards, conducting periodic measurements, and transparent public reporting of results. Over time, the Indoor Air Quality Control Act has expanded to enforce stricter controls on building materials and enhance radon mitigation measures. In doing so, it embodies the principles of the Environmental Policy Basic Act and is supported by other laws, policies, and systems related to air quality management. In line with these efforts, local governments have been implementing IAQ initiatives tailored to regional needs, including consulting services and financial support. However, challenges persist in harmonizing management across diverse facilities due to overlapping responsibilities among laws and government bodies. Future recommendations emphasize integrated strategies and enhanced inter-agency coordination to address these gaps effectively, ensuring healthier indoor environments for all stakeholders.

This study evaluated the suitability of using Wickerhamomyces anomalus A1-5 isolated from solid grain fermentation broth for winemaking by comparing the quality and functionality of Campbell Early wine produced with single and mixed inoculations. The pH ranged from 3.43 to 3.68, with the highest value in treatment B. Soluble solids ranged from 5.0 to 7.7 °Brix. Total acidity was measured at 0.42% to 0.47%. Color analysis indicated a significant decrease in lightness with an increase in redness across all treatment groups compared to the control. Among aroma compounds, 8 alcohols, 6 esters, 3 acids, and 11 other compounds were identified, with the control having the highest alcohol content and treatment D having the highest ester content. Tannin and total polyphenol contents ranged from 46.46 mg% to 95.92 mg% and from 87.66 mg% to 147.21 mg%, respectively. Antioxidant activities measured by DPPH and ABTS assays ranged from 33.84% to 69.02% and from 42.43% to 89.18%, respectively, with treatment B exhibiting the highest activities. These results suggest that W. anomalus A1-5 may positively influence the quality and functionality of Campbell Early wine, presenting potential as a novel yeast strain for winemaking.

본 논문에서는 마스크 설계에 다양한 위상 최적설계 기법을 적용하고, 광학 근접 보정 성능을 비교한다. 포토리소그래피 공정 중 포토레지스트에 가해지는 빛의 간섭 효과를 보정하는 광학 근접 보정 기술은 반도체 품질을 결정하는 중요한 요소 중 하나이다. 전통 적인 광학 근접 보정 기술에서는 마스크의 일부 요소를 조정하며 보정 효과를 시뮬레이션과 실험으로 확인하면서 설계를 진행한다. 이러한 경험적 설계를 통해 최적의 마스크 형상을 얻는 데는 한계가 있기 때문에, 위상 최적화 기법을 이용한 마스크 설계의 필요성이 증가하고 있으며, 민감도 기반 알고리듬을 이용한 위상 최적설계가 진행되어 왔다. 본 논문에서는 이진 구조 위상 최적설계(TOBS)와 새롭게 고안한 완화된 이진 구조 위상 최적설계(Continuated TOBS)를 이용하여 기존 최적설계와 비교하고, 더 발전된 최적설계 방향 을 제시한다.

압축하중을 받는 콘크리트 충전 강관(CFT) 부재는 강관에 의한 심부구속효과로 인해 내부 콘크리트의 취성이 감소하며, 이는 CFT 부재의 압축강도를 크게 증가시킨다. 본 연구에서는 강관을 퍼포본드 리브 전단연결재로 보강하여 콘크리트의 심부구속효과를 향상 시키고, 유한요소해석 모델에서 재료 특성 및 경계 조건을 설정하여 이를 평가하였다. 이때, 강재와 콘크리트 사이의 계면 거동을 보 다 정확하게 모사하기 위해 cohesive element를 사용하였으며, 이를 통해 강관과 콘크리트 간 하중 전달을 모델링하였다. 전단연결재 로 인한 심부구속효과 향상을 검증하기 위해 퍼포본드 리브 전단연결재가 적용된 CFT 부재의 축소 모델에 대한 실험 및 유한요소해 석을 수행하였고, 전단연결재가 없는 CFT 부재와의 비교를 통해 성능 향상이 확인되었다. 퍼포본드 리브 전단연결재는 홀의 지름 및 개수를 변화시키며 파라미터 스터디를 수행하였고, 이로 인해 전단연결재의 전단저항력 변화가 심부구속효과에 미치는 영향에 대해 평가하였다. 전단연결재의 전단저항력 변화에 따른 CFT 부재의 구조적 성능 차이를 분석하면서, 실험과 유한요소해석의 일치성을 검토하였다.

To utilize textured vegetable protein (TVP) instead of meat in kimchi stew, TVP of different sizes were added to kimchi stew under different cooking conditions. Canned Kimchi stew was prepared by adding processed TVP. Physicochemical quality characteristics and antioxidant activities of the broth, kimchi, and meat (or TVP) were measured. The pH and salinity did not show a significant difference between treatment groups in the broth or kimchi. However, the TVP treatment group showed higher pH and lower salinity than the control group. There was no significant difference in color between control group and TVP-treated groups. In terms of texture, the control group had the lowest hardness, gumminess, and chewiness, followed by TVP-1 and TVP-2 manufactured after pre-cooking, which showed lower hardness, gumminess, and chewiness. The smaller the size of the TVP, the lower the hardness, gumminess, and chewiness. Results of shear force were consistent with those of hardness. Contents of flavonoid and polyphenol compounds as antioxidant components did not increase or decrease with the addition of TVP. There were no significant differences in antioxidant activities among experimental groups.

본 연구에서는 이온성 물질 제거와 재생을 동시 수행하는 바이폴라막에 대한 운전 조건에 따른 성능 영향과 고회 수율을 위한 재생 조건을 연구하였다. 유입수의 농도와 유량이 증가할수록 제거율이 빠르게 감소하였으며 제거율 80% 지점 까지 유입수 농도 300 mg/L에서 최대의 TDS 제거용량을 나타내었고, 유입수 유량은 낮을수록 더 많은 TDS 제거용량을 나 타내었다. 낮은 전압에서는 제거율이 급격하게 감소하였고 전압이 높아질수록 제거율이 증가하지만, 일정 수준 이상의 전압 에서는 추가적인 제거율 향상을 보이지 않았다. 한편 재생을 위한 전압은 75 V로 선정하였는데, 이 이상의 재생 전압에서는 온도의 급격한 상승 및 이로 인한 바이폴라막의 손상이 관찰되었다. 재생 시 재생수의 공급을 최소화하기 위한 다양한 운전 모드가 평가되었고 70%의 고회수율을 구현할 수 있는 재생모드를 제안하였다.

To determine the differences in food quality between fish fed a low fish meal diet containing black soldier fly (Hermetia illucens) instead of fish meal and those fed a general fish meal diet, we analyzed the approximate components, mineral content, amino acid composition, fatty acid composition, color, and texture of Flounder (Paralichthys olivaceus). The analysis of approximate components showed no difference between the two samples, except for moisture content. Mineral contents were measured in the order of K, P, Na, and Mg in both samples, with no difference except for phosphorus (P). A total of 16 amino acids were detected in both samples, with no significant differences in their composition. Additionally, 17 types of free amino acids were identified, with no significant differences between the two samples. The fatty acid composition consisted of 13 fatty acids, with palmitic acid, DHA, and oleic acid being the most prominent, although slight differences in content were observed. The color and texture also showed no differences between the two samples. Overall, there were no significant differences in chemical components or physical characteristics, so it was judged to be insignificant in terms of food science.

고체전해질은 높은 에너지 밀도와 안전성을 갖춘 차세대 리튬이온전지에 꼭 필요한 핵심 요소다. 이러한 고체전 해질의 제작을 위해서 기존 고체전해질의 낮은 이온전도도와 높은 계면저항 문제를 해결해야 한다. 본 연구에서는 강화된 이 온 전도성과 계면 안정성을 지닌 PVDF-HFP 고분자에 분산된 Li7La3Zr2O12 (LLZO) 나노와이어 복합체를 기반으로 하는 새 로운 전해질(PVDF-HFP/LLZO/SN, PHLS membrane)을 제안한다. PHLS에 용매 열압착(Sovlent heat press, SHP)을 통해 계 면 저항과 내부 공극이 감소된 PHLS-(SHP)는 30°C에서 2.06 × 10-4 S/cm의 높은 이온 전도도, 4.5 V (vs. Li/Li+)의 넓은 전 기화학적 전위 창, 리튬 금속과 전해질 사이의 안정된 계면 안정성을 나타냈다. 0.2 mA/cm2에서 수행된 Li 대칭 셀을 사용한 전기화학적 테스트에서 150 시간 이상 안정성을 유지하는 것으로 확인되었으며, 이는 당사의 복합 기반 고체 전해질을 활용 하여 전기화학적 성능이 향상되었음을 시사한다.

This study presents an integrated indoor air quality index (IAQI) algorithm aimed at enhancing the efficiency of indoor air quality management in diverse indoor environments. The proposed IAQI accounts for the combined effects of multiple pollutants, offering a more comprehensive approach than traditional concentrationbased methods. Findings from four exposure scenarios and probabilistic health risk assessments indicate that the IAQI can be tailored to reflect occupant characteristics and space usage, thereby providing improved protection for sensitive populations, such as newborns. The application of occupant-specific criteria led to reductions in pollutant concentrations and associated health risks compared to conventional standards. Furthermore, the IAQI incorporates correction factors and weighted adjustments, facilitating robust risk assessments in complex multi-pollutant contexts. By addressing the limitations of single-pollutant management, this approach supports the development of more effective strategies for indoor air quality control. The proposed algorithm holds significant potential for practical applications in indoor air quality management and policymaking. Future research should focus on validating its effectiveness across a wider range of indoor environments.

본 연구에서는 중속 충돌하중을 받는 RC 벽체의 배면파쇄 영역을 모사할 수 있는 모델링 기법을 범용 유한요소해석 프로그램인 LS-DYNA을 통해 제안하였다. 충돌해석에 주로 사용되는 요소 삭제 기능이 발사체의 하중 전달에 영향을 미치고 이로 인해 배면파 쇄 영역이 과소평가 된다고 판단하였다. 따라서 충돌 위치 주변에는 요소 삭제 기능을 사용하지 않는 모델링 기법을 제안하였다. 제안 된 기법을 적용한 해석이 실험 결과를 근접하게 모사함에 따라, 제안한 기법이 연속적인 충돌에너지의 전달에 효과적임을 확인하였 다. 추가적으로 다른 충돌 조건에 대해 해당 기법의 적용성 검토를 진행한 결과, 대칭 조건을 사용하지 않고, 철근의 결속을 함께 모사 할 경우 RC 벽체의 파괴 거동을 더욱 근접하게 모사할 수 있음을 확인하였다.

군산과 고성(경남)의 벼(Oryza sativa)와 무안과 화순의 물억새(Miscanthus sacchariflorus)로부터 2012년 9월과 2013년 3월 사이에 Chilo속(풀 명나방과)에 속한 월동유충들을 각각 채집하였다. 시토크롬 c 산화효소 1 유전자의 부분염기서열과 성충 생식기 형태에 근거하여 벼에서 채집된 유충 은 이화명나방[C. suppressalis (Walker, 1863)]으로, 물억새의 유충은 나도이화명나방[C. niponella (Thunberg, 1788) (synonym, C. hyrax Błeszyński, 1965)]으로 동정되었다. 다른 여러 지역에서 이화명나방 성페로몬트랩에 포획된 성충 중 종 동정에 적용된 개체들은 모두 대상종인 이화명나방으 로 동정되었다. 두 종은 말령태로 월동하였다. 월동유충들을 채집한 후 수원지방의 야외조건에 두었을 때, 5~6월에 용화하였고, 14~88%의 유충 생존 율을 보였다. 3월 중 고성(경남)에서 채집된 이화명나방 유충과 1월 말에 화순에서 채집된 나도이화명나방 유충들은 채집 당시 휴면이 종료되어 발육을 진행하고 있는 것으로 추정되었다. 두 종이 분리되지 않은 채 인위적으로 만들어진 실내집단의 갓부화 유충을 수원 야외에서 사육하였을 때, 6월 하순 부터 9월 사이에 발육을 시작하는 유충들이 월동유충이 생성되는 휴면에 유도되었다. 6월 하순부터 7월 하순 사이에 사육을 시작한 집단들로부터는 비월동태와 월동태 유충들이 같이 발생하였다.

This study optimized the gelling agent and rice protein ratio for developing elderly friendly jelly using a response surface methodology. Response surface analysis was conducted with a gelling agent (0.1, 0.2, and 0.3%) and rice protein (3, 6, and 9%) set as independent variables. Increasing the gelling agent and rice protein ratio raised the pH while lowering the total acidity. The sugar content decreased nonlinearly with a higher gelling agent ratio. The lightness (L) and yellowness (b) differed according to the addition ratios of each ingredient, and the hardness peaked at 0.3% gelling agent and 6% rice protein, but excessive rice protein addition led to a decrease in hardness. Response surface analysis indicated an optimal formulation of 0.16% gelling agent and 6.41% rice protein, with all response variables aligning within the predicted ranges, validating the model.

This study aimed to evaluate quality characteristics and functionality of liqueurs made from different plum varieties (chu-hui and Blood Plum) with various maceration treatments. Liqueurs were prepared by adjusting plum extraction content and alcohol concentration from 10% to 50%. After 12 weeks of maceration, the pH ranged from 4.08 to 4.77. Both total acidity and soluble solidsincreased with higher alcohol content. Redness(a*), a key factor affecting consumer preference, was higher in blood plum liqueurs (17.15~52.69) than in Chu-hui liqueurs (－0.31~4.69). Antioxidant activity measured by DPPH and ABTS radical scavenging ability peaked at 8 weeks of maceration, showing variations among treatments. When the extraction ratio of plums was below 30%, the color appeared light. Liqueurs treated with 30% Blood Plum for 8 weeks showed the highest commercial potential. This study provides scientific information necessary for establishing a manufacturing process for plum-based liqueurs.

This study aims to propose new grading standards that can be applied to AI-based automatic sorting machines, reflecting current distribution and consumption trends. The current domestic grading standards for onions in South Korea are based on the “Agricultural and Fishery Products Quality Control Act”. They classify onions based on criteria such as uniformity, shape, color, and the presence of foreign matter. Onion grading standards are divided into four categories based on bulb diameter and weight. However, in the actual domestic market, onions are distributed according to a five-grade classification based on bulb diameter. Therefore, this study classified onions into eight grades, reflecting current distribution and consumption trends in the domestic market. These grades are applicable to AI-based automatic sorting machines. Marketable onions were classified into A1 (extra large) to A5 (extra small) based on the diameter of a single bulb. Onions used for non-marketable purposes (processing) were classified as grade B. Additionally, grade C and grade D were designated for processing and disposal, respectively. By establishing quality grading classifications that align with current distribution and consumption market trends as well as the operational characteristics of AI-based automatic sorting machines, we can expect improvements in work efficiency and reductions in distribution costs. Following this study, it will be necessary to establish comprehensive quality grading standards that include both external criteria (such as bulb weight and size) and internal criteria (such as detection of internal decay and disease occurrence).

벼의 주요 해충인 먹노린재의 실내 사육을 위해 발육 특성을 조사하였다. 먼저 알을 부화시키기 위해서는 수분 제공이 반드시 필요하였다. 부 화한 1령 약충은 수분 제공만으로 2령 약충으로 발육이 가능하였다. 그러나 2령 약충은 수분 제공만으로는 3령 약충으로 발육하지 못하고 모두 사망 하였다. 먹노린재 약충 1령기부터 볏과 8종의 식물을 제공했을 때 출수기의 벼에서 약충부터 성충으로 도달한 개체의 생존율은 90.0%로 가장 높았 으며, 수수와 밀은 각각 30.0%, 26.7%였으며, 보리는 6.7%, 조와 피는 3.3%로 낮았다. 유묘기의 옥수수에서는 3령이 되기 전에 모두 사망하였고, 출수기의 기장에서는 성충이 되기 전에 모두 사망하였다. 유묘기의 벼에서는 성충에 도달한 개체의 생존율이 25%로 출수기의 벼보다 낮았다. 그러 나, 유묘기의 벼에서 자란 1~2령 약충은 출수기 벼와 다른 볏과 식물보다 체중이 가장 무거웠다. 출수기의 벼에서는 4령과 5령 약충의 발육기간이 각각 평균 8.5일과 12.1일로 가장 짧았다. 출수기 벼에서 자란 먹노린재의 성충 몸무게는 50.91 mg으로 유묘기의 벼와 출수기의 수수와 밀에서 자 란 먹노린재의 성충 몸무게보다 무거웠다. 이러한 결과를 종합하면 먹노린재 약충의 발육과 생존에 가장 적합한 기주식물로 출수기의 벼가 제안되 었다.

This study aimed to estimate the rumen fermentation characteristics and greenhouse gas emissions of major domestic feed sources for Hanwoo. Five feed sources mainly used in South Korea were selected: corn meal (CM), soybean meal (SM), wheat flour (WF), palm kernel cake (PKC), and corn distiller’s dried grains with soluble (DDGS). These feed sources were purchased from a commercial feed company. For 24 h rumen incubation, each feed source (0.3 g) was placed into the incubation bottle with the rumen mixture (30 mL) in quadruplicates. After incubation, total gas production was measured and sub-sampled for CO2 and CH4 analyses, and the bottle content was centrifuged for rumen fermentation characteristics and in vitro dry matter digestibility (IVDMD). Crude protein content was highest in SM and lowest in CM. Ether extract content was highest in DDGS and lowest in SM, while neutral detergent fiber and acid detergent fiber contents were highest in PKC and lowest in CM. Propionate content was highest in DDGS, and butyrate and A:P ratio contents were highest in PKC (p<0.05). Total gas emission (mL/g DMD) was lowest in SM and DDGS, while CH4 emission (mL/g DMD) was lowest in DDGS (p<0.05). Therefore, this study concluded that DDGS could be an alternative feed source to reduce methane emissions.

Objectives: The main purpose of this study was to identify problems such as cooking fumes and lack of ventilation in school cafeterias and evaluate the improvement in the reduction of indoor pollutants in the cooking rooms through renovation. Methods: Three schools were selected for renovation and the spatial structures and air conditioning system of the cafeterias and cooking rooms wre investigated after renovation. The air conditioning systems were improved by the renovation work according to the characteristics of each school, and the concentration of indoor pollutants was measured and evaluated through CFD analysis. Results: The concentration of indoor pollutants in the cafeterias and cafe rooms was decreased after renovation. Conclusion: Air conditioning systems in the schools cafeterias and cooking rooms were improved in order to solve the problems of ventilation, and the indoor air quality improvement rate ranged from a minimum of 11% to a maximum of 40%. The renovation of cafeterias and cooking rooms was conducted to optimize the ventilation systems and this contributed to indoor air quality improvement by preventing the inflow of pollutants.

Oyster mushrooms were analyzed to confirm the effect of installing a convection fan on the uniformity of the environment inside the cultivation house, the quantity of fruiting bodies, and marketability for stable production. When using a convection fan, it was confirmed that the temperature, relative humidity, and CO2 concentration were maintained more uniformly than when not used.As for the characteristics of the fruiting bodies, the quantity per bottle was 177.3 g when using a convection fan, which was 17% higher than when not used, and the individual weight was 49% higher. In addition, the cap diameter, cap thickness, and stem thickness increased slightly in the convection fan treatment, and the stem length was shorter.