The purpose of this study is to compare and evaluate the safety of the facility using the Abaqus finite element analysis program according to the material characteristics like steel and GFRP.

The potential application of palladium-ruthenium composite membranes to the separation of hydrogen from chlorosilane gases in silicon-based industries was investigated. Ru/Pd/Al2O3/PSS membranes were prepared by electroless plating. Hydrogen permeation tests and temperature programmed desorption analysis revealed that the addition of a Ru over layer on Pd changed the hydrogen adsorption characteristics, resulting in improved stability of the membrane at low temperatures. The Ru/Pd/Al2 O3/PSS composite membrane had a stable hydrogen permeation flux of 1.8 m3m-2h-1 over a period of 1,200 h at 180°C without suffering hydrogen embrittlement. After exposure to impurities such as HCl and SiHCl3 , the hydrogen permeation flux of the Ru/Pd/Al2 O3/PSS composite membrane was stable over a period of 9h with feed pressure of 2.0 bar at 225°C.

본 연구는 수확시기가 수수수수 교잡종 원형 곤포사일리지의 품질에 미치는 영향을 구명하기 위하여 천안에 위치한 국립축산과학원 자원개발부에서 수행되었다. 수수수수 교잡종 SS405를 이용하여 숙기별 2회(출수기 및 완숙기)에 걸쳐 수확을 하여 사일리지로 조제하였다. 숙기가 진행됨에 따라 수수수수 교잡종원형 곤포사일리지의 조단백질은 증가하는 경향을 보였으나 NDF 및 ADF 함량 그리고 TDN 함량은 비슷한 수준을 유지하였다. 그리고 숙기별 in vitro

규모가 큰 지진이 발생함에 따라 발전소 내 비구조요소인 전기설비들이 전도등으로 인한 손상으로 제기능을 하지 못하는 사례가 있어 비구조요소의 고정부에 대한 내진성능평가가 필요하다. 이에 본 연구는 비구조요소의 고정부로 사용되는 후설치 앵커볼트 M10 사이즈를 대상으로 하였으며 균열 발생에 따른 성능을 비교하기 위해 인위적인 균열을 발생시켜 동적인발 성능 평가를 수행하였다. 실험은 ACI 355.2에 근거하여 정적인발성능 실험을 통해 구한 평균 최대하중의 50% 하중 10회, 37.5% 하중 30회, 25% 하중 100회 반복가력 후 정적성능시험을 수행하였다.

In order to analyze the dynamic characteristics and seismic performance of electrical cabinet affected the earthquake, a preliminary study should be carry on to find the natural frequency of that, and it can be known that through shaking table test and finite element analysis. The purpose of this study is to developing regarding the numerical model by using finite element method for the natural frequency of electrical cabinet be influenced by earthquake and to verify its reliability in comparison with experimental data through shaking table test in the future.

In this paper, laboratory tensile tests were performed for the basalt, glass and carbon fiber reinforced polymer. Epoxy resin was used as the polymer for this composite material. The procedure of the experiment was based on the criteria specified in ASTM D3039 / 3039M. Moreover, a Universal Testing Machine (UTM) with 100 kN capacity was used in this experiment. Results of the performance of each composite material were analyzed. In case of fiber type, carbon fiber reinforced polymer showed the best performance; followed by basalt fiber and glass fiber reinforced polymer with the elastic modulus of 37.03 MPa and 33.10 MPa, respectively.

The purpose of this study is to evaluate the structural safety of anchor bolts used for connecting between H-beam and reinforced concrete, which are considered to be the most vulnerable parts to external loads.

This paper dealt with a pincers-type gripper being able to grip a heavy-weighted cylindrical object having various size with itself. This gripper should be designed to seize the objects without any change of jaw shape. Grasping achieved equilibrium after the object slipped on the jaw while grasping it. To cope with this situation, we suggested the slip considered gripper design procedure based on grasping equilibrium. The obtained slip condition can provide a limit friction coefficient depending on the contact angle when initiating contact between jaw and object. Consequently, the gripping force and the required actuating force can be calculated. In order to verify the proposed slip condition, the simulations were performed using a dynamic software.

This paper describes the performance of the module-type drying apparatus for the composting of a food waste. The drying apparatus mainly consists of a screw-type food waste agitator, an air exhaust blower, a heat supply tube and a heat source. Two different discharging flow conditions of the drying apparatus, 4 and 5 m3/min, are introduced. Partly dried by-products after six hours drying operation in the drying apparatus is obtained while drying temperature keeps constant of 60oC. It is noted that the by-products needs to sufficient decay period for the composting. Deodorizing apparatus having a zigzag flow and a nozzle, which is connected to the drying apparatus, is also designed to enhance the removing performance of the odor. Throughout experimental measurements, time to the drying temperature of 60oC near the screw-type food waste agitator is shortened as discharging flow rate of the system decreases. The moisture content decreases to 50 percent after operation for 4 hours. Furthermore, the odor of the food waste is satisfied with the environment exhaust standard through the deodorizing apparatus.

A humanoid robot hand with one thumb and two fingers has been developed. Each finger has the specially designed compact joints, called "MEC Joint", which convert the rotation of a motor to the swing motion of a pendulum. The robot hand with the MEC Joints is compact and relatively light but strong enough to grasp objects in the same manner as human being does in daily activities. In this paper the kinematic model and the torque characteristics of the MEC Joint are presented and compared with the results of the dynamic simulation and the dynamometer test. The dynamic behavior of the thumb and two fingers with MEC Joints are also presented by computer simulation.

In Korea, a regulation of visual impact evaluation on development plan in natural environment is provided at the Natural Environment Conservation Act, but it was difficult to obtained the effectiveness enough to conserve natural landscape. So, the visual impact review on development plan is introduced to the act, through the revision of the Natural Environment Conservation Act in 2005. The basic directions of visual impact review are preservation, restoration, view protection, and harmony. The items of review are as follows; (1) development alternations for the provided plan, (2) executive reduction plan of visual impacts including consideration of growth of plants, (3) deliberation process between persons or parties concerned, etc. For rapid settlement of visual impact review system, it needs that the validity, the reliability, and the objectivity should be confirmed through steady research about reasonable guidance of review.

The problem of outdated and surplus facility-items in existing Rural Living Environment Renewal Program(RLERP) makes this study focus on restricting the range of facility sorts for the purpose of coㅁins with the changing rural living environment. In the four aspects of plan establishment, project implementation, comprehensiveness and linkage between programs, this study made an analysis of the existing RLERP that has 4-stage hierarchy, namely, Gun(county), Myun(primary administrative district), village and project site level Firstly, Myun and upper level policy programs fulfill the comprehensiveness and planning aspects, but have defects in the implementation and linkage aspects. Secondly, the village level programs satisfies more or less the four condition, but give rise to the problems of equity between the project target village and the non-target, and of generalization of the planning method applying to a specific village. At last, project level programs, controlled by several ministries, have defects in comprehensiveness and linkage aspects, exposing the sectoralism of central government. Above all, the existing RLERP has so many facility items, which have led to inefficient investment till now. Therefore, it's necessary that the environmental facilities should be selected(simultaneously reduced ), referring to following 5 criteria. (1) Exception of facilities relating to agricultural production. (2) Confined to public facilities to be constructed by government support. (3) Common-use facilities located in small town and below level area. (4) Consideration of not only the present need but also the future need of rural residents. (5) Reflection of a regional difference of mountain, plane and suburban area. Just 13 kinds of living environmental facilities are finally selected as the result of the selecting work, which can be an new alternative for RLERP. Concludingly, the selected facility items should be integrated into a designated project site by the prepared plan in order to enhance the efficiency of RLERP, investment and also to satisfy the four analytic aspects mentioned above.

The drastic change of mountain community, which have led existing villages to a size reduction or an extinction, makes this study concentrate on finding out the new community unit as a spatial zone of dayily life and agricultural production. The communality which has played a key role in a aura settlement consistency has been focused on the socio-economic aspect till now, neglecting the spatia] nature. The settlement-communality( SC) putting a stress on the spatial aspect can be, therefore, shapec as being multi-dimensional, composed of both a horizontally areal coverage on the surface of the residential place and a vertically hierarchial relationship between settlements, by analyzing thro( elements of communality that are the economic, socio -cultural and spatial activities. The research site is located administratively in Milan-Myoun, Pyoungchang-Gun, Gangwon-Do that ha: the characteristics as a typical mountain community. The results of field survey of which the method i: to draw the activity zone from an interview with every village's head and some residents with th( prepared questionaire can be summarized as followings. Firstly, the SC in almost all villages tended to be weakened or extincted, none the less, the spatia zone of that overally enlarged and got out of natural village unit(hamlet). However the areal coverall on which the SC has an influence reaches up to the alliant domain of a few villages generally congruen with the lowest level administrative district, Secondly, the economic and social activity pattern in village life has a tendency to be directly linked with a upper central place, so that has induced the function of a central village in the middle-low settlement hierarchy to be largely shrinked. Not only the conventional residents'access to goods service but also the recent service-delivers'access to residents has gradually formed the vertical communality with direct linkage between the upper and the bottom level settlements Lastly, the enfeeblement of the SC in the lowest settlement level tends to be supplemented by enlarging the horizontal zone of the SC or especially by strengthening the vertical direct linkage system. The very this point makes the mountain community open to the external world and also makes the spatial unit of community be multi-dimensional just like a cubic.

Village Renewal(Dorferneuerung) Policy Program in Germany, directly originated from Rural Beutification Movement between mid 18C and mid 19C, has several characteristics as follows. First, we can find out the planned approach in land use and settlement reorganization of Pillage Renewal Program. There are three ways to designate the planning area of the village rearrangement project in countryside. One is to designate the detailed B-plan district by urban plan for the village over some size defined legally. Another is to have a living space of settlement be contained in land allotment project area. In this case, residential areas of several villages related to agricultural land consolidation should be simultaneously designated as the project area. The last is only for the built environment focused on the living space. Second, the emphasis in German village encouragement program can be made on the integral approach through which sets of policy programs of the land allotment, the living environment improvement, the physical landscape management and the cultural resources conservation are intensively implemented together. Third, the bottom-up and community participation approach can be greatly stressed on the planning and implementation process, Community participation, subsidy application to local government by residents themselves, community consensus on architectural style and outdoor spatial form, etc. have been recognized as an effective strategy to accomplish the task of village activity promotion.

The drastic change of spatial structure in rural area and the recent rural development policies(related to settlement reorganization and plot rearrangement) make the rural space planning more important than ever. So this paper tries to evaluate the institutional aspects of rural spatial planning system focused on planning area. land use classification and hierachical order between existing plans. The results of this study can be summarized as follows. First, the rural planning areas are classified into 4-tiers(e.g., Gun, Myon, District, Village). Second, the rural land use planning has 3-tiers(e.g., macro, mediate and micro zoning) from the viewpoint of land use classification system, but it doesn't have mediate-micro zoning system. Third, the spatial plans in rural area, positioned in local planning, were categorized into regional planning system and land use planning system. However there's no linkage between both sides of each hierachial planning order.