2010년 1월 해양사고조사코드의 발효를 통하여 해양사고 조사에 대한 표준화된 지침이 마련되었고, 더불어 국제해사기구는 체 약국에게 동 지침의 준해양사고제도의 관리를 권고함에 따라 우리나라에서도 2010년 해양사고의 조사 및 심판에 관한 법률에 준해양사고 제도에 관한 조항을 신설하게 된다. 중앙해양안전심판원은 준해양사고제도의 효율적 운영을 통하여 해양사고를 예방하고자 다각적인 노력을 기울이고 있으나 본 제도는 좀처럼 활성화되지 못하고 있다. 본 연구는 준해양사고제도의 운영실태와 문제점을 살펴보고, 해외의 우수한 준해양사고제도 및 철도, 항공 등의 유사교통기관의 준사고제도를 분석함으로써 준해양사고제도의 효율적 이행을 위한 방안을 제시 하는 데 그 목적이 있다. 이에는 특히 준해양사고 자율보고로의 전환, 사법적 기능이 없는 민간단체로의 이관, 준해양사고보고에 대한 인 센티브 제도의 확대, 법제도 개선 및 세부 이행 지침의 마련 등이 포함된다.

The ultimate goal of this development is a hybrid solar energy storage device. It supplies stable power to the load due to the emergency generator that compensates for the power shortage due to solar power generation. We have developed a stand-alone photovoltaic power generation and energy storage system with a dual inverter that extends the performance life of the PV system. It solves the problem of shortening the lifespan of battery due to repetition of charge / discharge of PV system and supplies stable power to load due to emergency generator that compensates for power shortage due to solar power generation, and furthermore, A stand-alone photovoltaic power generation system having a dual inverter for extending the life span and a control method thereof. We have also developed an optimized energy solution that enables us to save and use the remaining surplus power in the ESS to save energy through efficiency, optimization and substantial energy savings.

Cu(II) can cause health problem for human being and phosphate is a key pollutant induces eutrophication in rivers and ponds. To remove of Cu(II) and phosphate from solution, chitosan as adsorbent was chosen and used as a form of hydrogel bead. Due to the chemical instability of hydrogel chitosan bead (HCB), the crosslinked HCB by glutaraldehyde (GA) was prepared (HCB-G). HCB-G maintained the spherical bead type at 1% HCl without a loss of chitosan. A variety of batch experiment tests were carried out to determine the removal efficiency (%), maximum uptake (Q, mg/g), and reaction rate. In the single presence of Cu(II) or phosphate, the removal efficiency was obtained to 17 and 16%, respectively. However, the removal efficiency of Cu(II) and phosphate was increased to 50~55% at a mixed solution. The maximum uptake (Q) for Cu(II) and phosphate was enhanced from 11.3 to74.4 mg/g and from 3.34 to 36.6 mg/g, respectively. While the reaction rate of Cu(II) and phosphate was almost finished within 24 and 6 h at single solution, it was not changed for Cu(II) but was retarded for phosphate at mixed solution.

In recent years, imbalanced data is one of the most important and frequent issue for quality control in industrial field. As an example, defect rate has been drastically reduced thanks to highly developed technology and quality management, so that only few defective data can be obtained from production process. Therefore, quality classification should be performed under the condition that one class (defective dataset) is even smaller than the other class (good dataset). However, traditional multi-class classification methods are not appropriate to deal with such an imbalanced dataset, since they classify data from the difference between one class and the others that can hardly be found in imbalanced datasets. Thus, one-class classification that thoroughly learns patterns of target class is more suitable for imbalanced dataset since it only focuses on data in a target class. So far, several one-class classification methods such as one-class support vector machine, neural network and decision tree there have been suggested. One-class support vector machine and neural network can guarantee good classification rate, and decision tree can provide a set of rules that can be clearly interpreted. However, the classifiers obtained from the former two methods consist of complex mathematical functions and cannot be easily understood by users. In case of decision tree, the criterion for rule generation is ambiguous. Therefore, as an alternative, a new one-class classifier using hyper-rectangles was proposed, which performs precise classification compared to other methods and generates rules clearly understood by users as well. In this paper, we suggest an approach for improving the limitations of those previous one-class classification algorithms. Specifically, the suggested approach produces more improved one-class classifier using hyper-rectangles generated by using Gaussian function. The performance of the suggested algorithm is verified by a numerical experiment, which uses several datasets in UCI machine learning repository.

This study aimed to produce high-quality blastocysts and establish appropriate microinjection conditions for the introduction of target gene. First, we identified embryo development to the blastocyst stage after microinjection using the CRISPR/Cas9 system on the Cas9 protein or mRNA. As a result, we confirmed that blastocyst development in the Cas9 mRNA injected group significantly increased when compared to the Cas9 protein injected group (p<0.05). However, the blastocyst gene targeting rate increased in the Cas9 protein injected group when compared to the Cas9 mRNA injected group (p<0.05). Next, we treated the injection medium with 10 μg/ml of cytochalasin B (CB), and the microinjected embryos were cultured in CR1-aa medium supplemented with 0.1 μM of melatonin (Mela). Consequently, the blastocyst formation rate significantly increased in the CB treated group (p<0.05). After microinjecting embryos with the CB treated injection medium, we investigated blastocyst formation and quality via Mela treatment. Consequently, the Mela treated group demonstrated significantly increased blastocyst formation rates when compared to the non-treated group (p<0.05). Furthermore, immunofluorescence assay using RAD51 (DNA repair detection protein) and H2AX139ph (DNA damage detection protein) showed an increase in RAD51 positive cells in Mela treated embryos. Therefore, we verified the improvement in knock-in efficiency in microinjected bovine embryos using Cas9 protein. These results also demonstrated that the positive effect of the CB and Mela treatments improved the embryonic developmental competence and blastocyst qualities in genetically-edited bovine embryos.

In this study, TMD(Tuned Mass Damper) is installed in a retractable-roof spatial structure in order to investigate dynamic response characteristics according to mass ratio and installed position of TMD on large spatial structures. The example analytical model is generated based on the Singapore sports hub stadium. Twenty eight analytical models are used to investigate optimal installation position of TMD for the example retractable-roof spatial structure using 4 to 16 TMDs. The mass of one TMD is set up 1% of total mass at the example analytical model. Displacement response ratio of model with TMD is compared with that of base model without TMD. It has been found from numerical simulation that it is more effective to install TMD at the edge of the spatial structure rather than to concentrate the TMD at the center of the spatial structure.

As a result of reviewing various documents and existing researches, since the late Goryeo period, the most active period in the Ondol(溫突, Korean floor heating system) facilities is the 17th century. The phenomenological reason was recovering the buildings destroyed by the Japanese Invasion of Korea in 1592(壬辰倭亂]) & the Manchu War of 1636(丙子胡亂), but the underlying cause was an abnormal climate in which a pair of summer and winter cold continued. In the 17th century, as the Ondol facilities grew rapidly without distinction between regions and classes, the supply and demand of fuel caused economic and natural environmental problems. And a negative and positive view on Ondol was suggested. Since the middle of the 18th century, when the demand and supply of Ondol reached its peak, which could no longer increase, a new awareness of Ondol began to grow. The room was called the Panbang(板房)and the Ondol, depending on the material that made up the floor. It was considered natural to have the Ondol from this time on. The Incan(□火間) and Jo(竈) that were made to burn were started to be recorded as a kitchen, regardless of size and function. Changes in social awareness of Ondol have led to concerns about heating efficiency. A variety of architectural explorations were conducted. Such a search was later realized in concrete architectural form. There is a double Ondoll structure, and the column spacing is reduced compared to the previous one. The heat buffer space is formed around the Ondol room, and the double window can control the light and the air going in and out.

K-means algorithm is one of the most popular and widely used clustering method because it is easy to implement and very efficient. However, this method has the limitation to be used with fixed number of clusters because of only considering the intra-cluster distance to evaluate the data clustering solutions. Silhouette is useful and stable valid index to decide the data clustering solution with number of clusters to consider the intra and inter cluster distance for unsupervised data. However, this valid index has high computational burden because of considering quality measure for each data object. The objective of this paper is to propose the fast and simple speed-up method to overcome this limitation to use silhouette for the effective large-scale data clustering. In the first step, the proposed method calculates and saves the distance for each data once. In the second step, this distance matrix is used to calculate the relative distance rate (Vｊ) of each data j and this rate is used to choose the suitable number of clusters without much computation time. In the third step, the proposed efficient heuristic algorithm (Group search optimization, GSO, in this paper) can search the global optimum with saving computational capacity with good initial solutions using Vｊ probabilistically for the data clustering. The performance of our proposed method is validated to save significantly computation time against the original silhouette only using Ruspini, Iris, Wine and Breast cancer in UCI machine learning repository datasets by experiment and analysis. Especially, the performance of our proposed method is much better than previous method for the larger size of data.

Two different emitting compounds, 1-[1,1;3,1]Terphenyl-5-yl-6-(10-[1,1;3,1]terphenyl-5-ylanthracen-9-yl)-pyrene (TP-AP-TP) and Poly-phenylene vinylene derivative (PDY 132) were used to white OLED device. By incorporating adjacent blue and yellow emitting layers in a multi-layered structure, highly efficient white emission has been attained. The device was fabricated with a hybrid configuration structure: ITO/PEDOT (40 nm)/PDY-132 (8∼50 nm)/NPB (10 nm)/TP-AP-TP (30 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm). After fixing TP-AP-TP thickness of 30 nm by evaporation, PDY-132 thickness varied with 8, 15, 35, and 50 nm by spin coating in device. The luminance efficiency of the white devices at 10 mA/cm2 were 2.93 cd/A∼6.55 cd/A. One of white devices showed 6.55 cd/A and white color of (0.290, 0.331).

7-(4-([1,1-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)phenyl)-4-methyl-2H-chromen-2-one (BPFA-C) including coumarin moiety was synthesized through Suzuki aryl-aryl coupling reaction. Optical and electrical properties were examined by UV-visible absorption spectra, PL spectra, and AC-2. UV-visible spectrum of BPFA-C in a film state showed maximum absorption wavelength of 367 nm. PL spectrum of BPFA-C show maximum emission wavelength of 511 nm. BPFA-C showed highly efficient luminescence property. EL spectrum of BPFA-C exhibited a maximum value of 504 nm and BPFA-C device provided luminescence efficiency of 4.59 cd/A, power efficiency of 3.17 lm/W, and CIE (x,y) of (0.25, 0.53) at a current density of 10 mA/cm².