We have been developing a solar observing system based on a fast CCD camera 1M30P made by the DALSA company. Here we examine and present the characteristics and performance of the camera. For this we have analyzed a number of images of a flat wall illuminated by a constant light source. As a result we found that in the default operating mode 1) the mean bias level is 49 ADU/pix, 2) the mean dark current is about 8 ADU /s/pix, 3) the readout noise is 1.3 ADU, and 4) the gain is about 42 electrons/ ADU. The CCD detector is found to have a linearity with a deviation smaller than 6%, and a uniform sensitivity better than 1%. These parameters will be used as basic inputs in the analysis of data to be taken by the camera.

This research examines the use of the ellipsis in 30 telephone conversations and shows the reason for the use of the ellipsis in aspects of functionality in the area of study of Korean and Japanese. It also demonstrates if the supplementary of utterance has which type of format at each functionality and if there are the format of the supplementary of utterance repeated. The results below are described in detail 1. The functionality of the ellipsis at the end of sentence in both languages (1) Demanding Behavior: request, recommendation, proposition, (2) Demanding Information: question, confirmation request, (3) Providing Information: self-information, the third person, reason, conveying a story to the others, and (4) Expressing will: revision/ evaluation, self-behavior in future, compliance/support, apology, greeting. 2. The format of the supplementary of utterance of the ellipsis at the end of sentence in both languages. In regard of the format of the supplementary of utterance, Korean has the connection formats, which are「－고」「－ㄴ데」「－니까」and so on, Japanese has「－けど」「－から」「て」「って」and the like. The study shows that formats repeated are existed in the ellipsis at the end of the sentences in both languages.

IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification bodies and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which were certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with IEC 60300. This paper introduces a Quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.

IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification body and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which was certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with ISO 60300. This paper introduces a quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.

한우의 수정란을 보존하기 위하여 고급육계통과 다유계통의 공란우를 선발하여 과배란처리에 따른 황체의 반응, 황체수에 대한 채란된 수정란의 수 그리고 채란 수정란수에 대한 이식가능한 수정란 생산에 미치는 영향을 조사하였다. 다유계통의 공란우는 이유시 체중에 대한 육종가 상위 20%이내, 고급육 계통의 공란우는 육질에 대한 육종가 상위 20%이내의 종빈우를 선발하였다. 과배란처리 방법은 발정후 11일차에 PEG 30% FSH를 견갑부에 피하주사로 1회 투여하

Lee et al. reported that a mixture of Cu and Ta, the combination of which is characterized by a positive heat of mixing, of +2 kJ/㏖, can be amorphized by mechanical alloying(MA). It is our aim to investigate to what extent the MA is capable of producing a non-equilibrium phase with increasing the heat of mixing. The system chosen is the binary with =+19 kJ/㏖. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The vial and balls are made of Cu containing 1.8-2.0 wt.%Be to avoid contaminations arising mainly from Fe when steel balls and vial are used. The MA powders were characterized by the X-ray diffraction, EXAFS and thermal analysis. We conclude that two phase mixture of nanocrystalline fcc-Cu and bcc-Mo with grain size of 10 nm is formed by the ball-milling for a 3:7 mixture of pure Cu and Mo, the evidence for which has been deduced from the thermodynamic and structural analysis based on the DSC, X-ray diffraction and EXAFS spectra.

For the austenitic stainless steel (304L) manufactured by metal injection molding(MIM), the effects of copper content and sintering temperature on the mechanical properties, antibacterial activities, corrosion resistance, and electric resistances were investigated. The specimens were prepared by injection molding of the premixed powders of water-atomized 304 L and Cu with poly-acetyl binders. The green compacts were prepared with various copper contents from 0 to 10 wt.% Cu, which were debound thermally at 873 K for 7.2 ks in gas atmosphere and subsequently sintered at various temperatures from 1323 K to 1623 K for 7.2 ks in Ar gas atmosphere. The relative density and tensile strength of the sintered compacts showed the minimum values at 5 and 8 wt.% Cu, respectively. Both the relative density and the tensile strength of the specimen with 10 wt.% Cu sintered at 1373 K showed the highest values, higher than those of copper-free specimen. Antibacterial activities investigated by the plastic film contact printing method for bacilli and the quantitative analysis of copper ion dissolved in water increased as the increase of the copper content to stainless steels. It was also verified by the measurement of pitting potential that the copper addition in 304 L could improve the corrosion resistance. Furthermore the electric conductivity increased with the increase of copper content.

IEC 60300의 국제 규격은 시간종속성 경영 시스템의 규격으로써 제 1부는 시간종속성 경영 프로그램, 제 2부는 시간종속성 프로그램 구성요소와 업무, 제 3부는 응용지침 표준의 13개의 규격으로 구성되어 있다. 이 규격은 제품의 초기 단계서부터 폐기 단계까지 수명주기 전 단계에 걸쳐 운영의 효율성, 시간, 비용의 제약 하에 위험을 최소화하고 안전성을 최적화하기 위한 지침을 제공한다. 본 연구에서는 현재 2003년 규격 제정을 목표로 개정중인 IEC 60300-1과 IEC 60300-2의 2001년 11월 CDV를 참고로 IEC 규격의 개정방향에 대한 연구를 하려한다.

We present UBVI CCD photometry of the stellar contents and globular cluster(GC) candidates in the spiral galaxy NGC 300 in the Sculptor group. Color-magnitude diagrams for 18 OB associations having more than 30 member stars are presented. The slope of the initial mass function for the bright stars in NGC 300 is estimated to be Γ = -2.6 ± 0.3. Assuming the distance to NGC 300 of (m - M)o = 26.53 ± 0.07, the mean absolute magnitude of three brightest blue stars is obtained to be < MvBSG (3) > = -8.95 mag. We have performed search for GCs in NGC 300 and have found 17 GC candidates in this galaxy. Some characteristics of these GC candidates are discussed.