새우난초의 대량 증식 시스템을 확립하기 위하여 새우난초 종자 무균파종 및 순화 방법에 따른 생육특성 을 조사하였다. 발아율은 MS배지 에서 65% 이상이었고 유묘의 대량증식이 가능하였다. 계대배양한 유묘의 증식은 고체배지 보다는 액체배지에서 생육상태 가 더 양호한 경향을 보였다. 순화실험 결과, 70%차광조건에서 플라스틱 멀칭으로 습도를 80% 이상 유지하였을 때 100% 순화 생존하였다. 기내 육성된 배양묘는 백태로 뿌리를 감싸 심었을 때 발근이 가장 잘 이루어졌으나 순화과정 중에서 백태 대신에 질석과 펄라이트를 1:1 부피비로 이용한 경우에도 88%의 비교적 높은 생존율을 보였다.

For the economical mass production of the interspecific hybridization, we developed the modified system of mass pollination where controlled pollination was done with pollen mix from good father trees and without pollination bags in a closed greenhouse. U

The absorption of benzene in nonpolar solution was studied in a laboratory-scale of bubble column varying of gas flow rates and gas-to-liquid ratios. A bubble column had a 0.8～1×10-3 m3 total volume (height 1500 mm, diameter 50 mm). Solution analysis was performed by GC-FID and GC-MSD. The objectives of this research were to select the best absorption fluid and to evaluate the mass transfer characteristics under specific conditions of each absorption. The results of this research were follow as: First, the heat transfer fluid is more efficient than the other nonpolar solution in removing VOC. Second, The benzene removal efficiency improved according to an increasing rate of gas flow. Also, volumetric mass transfer rate of column can be enhanced by increasing gas flow rate. Finally, the relation of gas flow rates, liquid amount, and volumetric mass transfer coefficient was obtained as follows. Kya=0.5906(Vg/L)0.7611 The following correlation of mass transfer coefficient and efficiency was proposed. η=0.06078 Kya0.2444

The total hydrocarbon distribution of oil products obtained from the pyrolysis of four kinds of mixtures of polyethylene-polystyrene waste has been studied by multidimensional chromatography(high performance liquid chromatography followed by capillary gas chromatography)/mass spectrometry. Saturated, unsaturated and aromatic hydrocarbons in oil products were selectively pre-separated according to structural groups by HPLC and the weight fraction of each group was estimated by analysis of each component using GC-FID response factors. The hydrocarbon distribution of aliphatic fraction consists of C5 to C25 saturated and unsaturated hydrocarbons. And that of aromatics fraction consists of benzene, toluene, xylene, styrene, propenyl benzene, naphthalene, and some of derivatives. Pyrolysis temperature did not affect the ratio of total weight fraction of aliphatic over aromatic hydrocarbon distribution in case of PS only and PE-PS mixtures (1:1 and 1:4 wt. ratio) as a feed while affected the ratio of total wt. fraction in case of PE only. The optimal temperature for the maximum oil production was 600℃ for pyrolysis of PS and 1:1 and 1:4 mixtures of PE and PS. The optimal condition for aromatic recovery was 600℃ with 1:1 mixture of PE and PS. In this condition, aromatic was produced up to 90% of total oil product. The maximum yield of toluene, xylene, styrene, and propenyl benzene were 8.6, 8.9, 51.0 and 7.4% of feed for pyrolysis PS at 700℃, respectively. However, only 1.3% naphthalene was recovered at 700℃ with 1:1 PE:PS(by wt.).

The polycyclic aromatic hydrocarbons(PAHs) content in sewage sludge was determined by gas chromatography linked to ion trap mass spectrometry(GC/ITMS) with five deuterated PAHs as internal standards. The minimum detection limit was from 1.66 to 7.14 pg for individual PAH by GC/ITMS. For determining total PAHs(∑PAH) in sewage sludge 84 samples from 74 waste water treatment plants in whole country were analyzed. The average content of ∑PAH for whole samples was 3,289±3,098 μg/kg, and ranged from 142 to maximum 20,102 μg/kg. According to the number of population of the city, the areas were classified as five regions, ie. big, large, middle, small, and rural area in which the waste water treated plants were grown. The contents of PAHs were 4,689±5,503, 5,839±6,401, 3,725±2,053, 2,237±2,069, and 2,475±1,489 μg/kg, in big, large, middle, small, and rural area, respectively.

새 번식방법 개발을 위해 둥굴레 뿌리는 눈이 없어도 부정아가 발생된다는 점에 착안하여 뿌리길이와 굵기에 대한 부정아 발생에 관한 시험 연구를 한 결과는 다음과 같다. 1년차는 뿌리길이가 5cm 경우 66.5%지만 15cm에서는 113% 부정아 발생되었고, 뿌리의 굵기 5mm이하는 98.3%지만 10mm이상은 113.3%로 46.7% 차이를 보였다. 2년차는 부정아 생성률은 15cm에서는 1년차의 3배, 시험구 설치 당시 전혀 눈이 없는 상태에서 4배의 증식을 보였다. 용토는 일반토양 2.6배 보다 모래나 펄라이트가 3.1~3.3배 증식 되었다. 대량번식을 위한 가장 좋은 방법은 10mm 둥굴레 뿌리를 5cm로 절단하여 모래에 식재하는 방법으로 판단된다.

Packing tower has been used in the chemical industry and the protection of environment for a long time. In the view of environmental protection, purification of exhaust gas can be performance effective by gas absorption in counter-current packing tower. In this study, characteristics of hydraulic and mass transfer were investigated in D. 0.3m × H. 1.4m packing tower with 50mm plastic Hiflow-ring. This study was carried out "Test systems were experimented in conditions of Air, Air/H2O, NH3-Air/H2O, NH3-Air/H2O- H2SO4, and SO2 -Air/H2O-NaOH under steady state". The extent of test included dry and wetting pressure drop, physical law, separation efficiency, and hold-up as function of gas and liquid load.

In order to improve the ship maneuverability, It is important to estimate precisely the hydrodynamic coefficients of added mass forces acting on a ship especially in shallow waters, and simple methods for predicting such hydrodynamic forces Is also very desirable. In the previous paper using 3-Dimension potential flow theory, it has been demonstrated that potential calculation is available to estimate added mass coefficients. The present work is aimed at the suggestion of the simplified formulas for predicting the translation and lateral motion of added mass coefficients in shallow water. So, 3-D potential flow theory is also used to calculate the added mass coefficients in deep and shallow waters for Series 60 model which has 5 different kinds of block coefficients (0.6-0.8), SR196 model and T/S HANNARA. After some series computation, simplified formulas for Predicting the added mass force in shallow waters is suggested based on the computation results of Series 60 model. The formulas consist of the combination of principal dimensions and the water depth; d/B, Cb, d/H. The predicted results are compared with the Computation results for SR196 model and T/S HANNARA. The precision of predicted results by simplified formulas are good enough for the practical use. (d/B : draft-Breadth ratio, d/H draft-Water depth ratio, Cb : Block coefficients).

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.

토천궁의 줄기마디를 이용한 효율적인 삽목번식 기술을 개발하고자 수행한 시험결과를 요약하면 다음과 같다. 1. 삽목시는 8월30일 1~2마디삽목에서 발근율이 81%로 가장 높았고 발근상태도 양호하였다. 2. 삽수채취에 따른 수량감소는 주당경수의 50%채취에서 9%이하 였으나 100% 채취에서는 10~23%로 비교적 높았다 3. 삽목묘의 포장정식후 활착율은 9월25일 및 10월25일 정식에서 각각 85%, 87%로 높았으나 11월25일 정식에서는 28%로 낮았다. 4. 10a당 수량은 9월25일및, 10월25일 정식에서 각각 127kg, 120kg으로 높았다.

It is noted that the red tides and the oxygen-deficient water mass are extensively developed in Masan Bay during summer. The nutrients mass balance was calculated in Masan Bay, using the three-dimensional numerical hydrodynamic model and the material cycle model. The material cycle model was calibrated with the data obtained on the field of the study area in June 1993. The nutrients mass balance calculated by the combination of the residual currents and material cycle model results showed nutrients of surface and middle levels to be transported from the inner part to the outer part of Masan Bay, and nutrients of bottom level to be transported from outer part to inner part of Masan Bay. The uptake rate of DIN in the box A1(surface level of inner part) was found to be 337.5㎎/㎥ ·day, the largest value in all 9 boxes and that of DIP was found to be 18.6㎎/㎥·day in box A1, and the regeneration rate of DIN was found to be 78.2㎎/㎥· day in the box A3(bottom level of inner part), and that of DIP was found to be 18.6㎎/㎥· day in box A1. The regenerations of DIN and DIP in the water column of the entire Bay were found to be 7.66ton/day and 760㎏/day, respectively. And the releases of DIN and DIP from the sediments of the entire Bay were found to be 2.86ton/day and 634㎏/ day, respectively. The regeneration rate was 2.5 times as high as the release rate in DIN, and 1.2 times in DIP. The results of mass balance calculation showed not only the nutrients released from the sediments but the nutrients regenerated in water column to be important in the control and management of water quality in Masan Bay.

When the leaves, roots and stem segments of seedling of Polygonatum odoratum were cultured on Murashige and Skoog medium with 2.0mg/l BAP, stem segments were the most efficient explants for adventitious shoot inductino. To observe the efficient combination of growth regulators on the adventitious shoot formation , stem segments were cultured on MS medium with various kinds of cytokinins (BAP, kinetin, zeatin). From this experiment, cytokinin treatement was prerequisite for theadventitious shoot formatino,especially BAP was the most effective. Auxin (NAA or IBA) in combination with cyotokinin highly enhanced the adventitious shoot formation. Twenty five percents of explants produced the adventitious shoots on medium with 2.0mg/l BAP solely, while 83% of explants produced the adventitious shoots on medium with 2.0mg/l BAP and 0.1mg/l IBA. Root formationform adventitious shoot was promoted after transfer to 1/2 MS medium supplemented with 0.1mg/l IBA and 0.5mg/l zeatin, thereafter the plantlets with shoots and roots were cultured on 1/2MS medium lacking growth regulators. When the stem segments were cultured to MS medium with 1.0mg/l 2,4 NAA and IBA , yellow and nodulous cali were formed from the stem segments which were developed into adventitious roots. These roots were actively grew after transferred to MS liquid medium lacking growth regulators.