This study examines and proposes standardization approaches to address the heterogeneous issues of metadata in drone imagery within the agricultural sector. Image metadata comes in various formats depending on different camera manufacturers, with most utilizing EXIF and XMP. The metadata of cameras used in fixed-wing and rotary-wing platforms, along with the metadata requirements in image alignment software, were analyzed for sensors like DJI XT2, MicaSense RedEdge-M, and Sentera Double4K. In the agricultural domain, multispectral imagery is crucial for vegetation analysis, making the provision of such imagery essential. Based on Pix4D SW, a comparative analysis of metadata attributes was performed, and necessary elements were compiled and presented as a proposed standardization (draft) in the form of tag information.

At a time when the demand for drones is increasing, a plan to utilize drone images was sought for efficient promotion of cadastral resurvey. To achieve the purpose of this study, the technical and legal status of drone images was reviewed, and through this, the possibility of using it for cadastral resurvey was primarily reviewed. subsequently, an experiment was conducted targeting the project district to examine whether drone images were applied to boundary extraction, which is the primary process of cadastral resurvey. As a result of the experiment, it was found that boundary extraction from images is possible. However, in some cases, it is impossible due to field conditions or image quality. Therefore, it is necessary first to apply cases where boundary extraction is possible to cadastral resurvey and seek solutions for some impossible cases. In particular, the image quality problem may have problems with the current technology, but it will also have problems with the existing drone equipment. So, standard for drone calibration should also be established. Finally, the cadastral resurvey surveying procedure using drones was also presented.

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH3-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

The purpose of this study is to determine the concepts of heterotopic image and fashion space, and the characteristics of fashion space and images from the perspective of fashion brands and users. This study examines the evolution of fashion space and consumers with it, based on Foucault’s theory of heterotopia, which refers to spaces that blend contradictory features not typically found within a single physical structure. This is accomplished by employing a single case study of Ader Error’s Ader Space, a Seoul-based brand known for its unique approach to presenting and communicating fashion. Based on an analysis of Instagram posts of Ader Error along with the hashtag searches “aderspace” and “adererror”, this study categorizes heterotopia from the perspective of fashion brands into three properties: fashion space as a medium for selling fashion products; fashion space as getaway to hybrid fashion practices; and fashion space as an illusionary place to experience fashion. From the user perspective, the heterotopic image of Ader Space portrayed on Instagram is characterized by the image of fashion products in an extraordinary fashion space, the image of a fashion space beyond space and time, and the image of exposing the hidden and the illusioncompensation of fashion space. This study contributes to a heightened understanding of the evolutionary concept of the fashion space.

단단한 자구를 가진 적색 비모란선인장 ‘Gangjeok’ 품종 은 ‘Isaek’품종을 모본으로, ‘Suyeon’ 품종을 부본으로 하여 2018년에 교배하여 육성하였다. 교배 후 획득한 종자는 조직 배양실에서 기내파종하여 획득한 유묘를 기내에서 삼각주선 인장에 접목하여 ‘1802001’ 등 20계통을 양성하였다. 2019 년에 기내에서 양성한 20계통을 온실에서 삼각주선인장 대목 에 접목하여 재배하면서 ‘1812005’ 계통을 1차 선발하였다. 2020년부터 2022년까지 3차에 걸쳐서 특성을 검정한 후, 농 산물직무육성품종 심의회에서 최종 선발하여 ‘Gangjeok’으 로 명명하였다.‘Gangjeok’ 품종은 편원형의 적색 구를 가진 다. 혹(tubercle)이 돌출된 형태의 모구는 8.4개의 능(rip)을 가지며, 3.5mm 짧은 회색 가시가 발생한다. 정식 10개월 후 ‘Gangjeok’ 품종의 직경은 46.1mm이며, 자구는 평균 18.3 개 발생한다. 2022년 육성계통 평가회에서 ‘Gangjeok’ 품종 은 높은 기호도 점수 4.0을 받았다.

Natural uranium-contaminated soil in Korea Atomic Energy Research Institute (KAERI) was generated by decommissioning of the natural uranium conversion facility in 2010. Some of the contaminated soil was expected to be clearance level, however the disposal cost burden is increasing because it is not classified in advance. In this study, pre-classification method is presented according to the ratio of naturally occurring radioactive material (NORM) and contaminated uranium in the soil. To verify the validity of the method, the verification of the uranium radioactivity concentration estimation method through γ-ray analysis results corrected by self-absorption using MCNP6.2, and the validity of the pre-classification method according to the net peak area ratio were evaluated. Estimating concentration for 238U and 235U with γ-ray analysis using HPGe (GC3018) and MCNP6.2 was verified by 􀟙-spectrometry. The analysis results of different methods were within the deviation range. Clearance screening factors (CSFs) were derived through MCNP6.2, and net peak area ratio were calculated at 295.21 keV, 351.92 keV(214Pb), 609.31 keV, 1120.28 keV, 1764.49 keV(214Bi) of to the 92.59 keV. CSFs for contaminated soil and natural soil were compared with U/Pb ratio. CSFs and radioactivity concentrations were measured, and the deviation from the 60 minute measurement results was compared in natural soil. Pre-classification is possible using by CSFs measured for more than 5 minutes to the average concentration of 214Pb or 214Bi in contaminated soil. In this study, the pre-classification method of clearance determination in contaminated soil was evaluated, and it was relatively accurate in a shorter measurement time than the method using the concentrations. This method is expected to be used as a simple pre-classification method through additional research.

The decommissioning of Korea Research Reactor Units 1 and 2 (KRR-1&2), the first research reactors in South Korea, began in 1997. Approximately 5,000 tons of waste will be generated when the contaminated buildings are demolished. Various types of radioactive waste are generated in large quantities during the operation and decommissioning of nuclear facilities, and in order to dispose of them in a disposal facility, it is necessary to physico-chemically characterize the radioactive waste. The need to transparently and clearly conduct and manage radioactive waste characterization methods and results in accordance with relevant laws, regulations, acceptance standards is emerging. For radioactive waste characterization information, all information must be provided to the disposal facility by measuring and testing the physical, chemical, and radiological characteristics and inputting related documents. At this time, field workers have the inconvenience of performing computerized work after manually inputting radioactive waste characterization information, and there is always a possibility that human errors may occur during manual input. Furthermore, when disposing of radioactive waste, the production of the documents necessary for disposal is also done manually, resulting in the aforementioned human error and very low production efficiency of numerous documents. In addition, as quality control is applied to the entire process from generation to treatment and disposal of radioactive waste, it is necessary to physically protect data and investigate data quality in order to manage the history information of radioactive waste produced in computerized work. In this study, we develop a system that can directly compute the radioactive waste characterization information at the field site where the test and measurement are performed, protect the stored radioactive waste characterization data, and provide a system that can secure reliability.