We confirm whether Zr powders can restrain a rapid nitrification reaction and offer a stable oxidation reaction according to temperatures in nitrogen gas purification. A pellet-type, porous Zr getter is prepared (diameter: 10 and thickness: 3 mm) using Zr powder with an average particle size of 45 μm. While maintaining the whole system, the Zr getter reaction is confirmed with an increase in temperature from 150 to 550 oC at increments of 100 oC under 99.999 % purity nitrogen atmosphere comprising of 10 ppm of impurity. Surface color, pore size, stabilized layer, and phase change are confirmed with optical microscopy, SEM-EDS, Micro-Raman, and X-ray diffraction (XRD) according to the Zr getter temperature. The surface color of the Zr getter changes from metallic silver to dark gray as temperature increases. In the EDS results, the nitrogen component is not observed, and oxygen content increases from each surface at elevated temperatures. The Raman and XRD results show the oxidation layer as a result of 350 oC annealing. Therefore, the Zr getter can be applied as a nitrogen getter under 5-nine purity nitrogen atmosphere after appropriate oxidized pre-stabilization process to prevent rapid nitrification reaction.

In order to improve the thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites, carbon nanotubes (CNTs) were introduced by electrophoretic deposition. After modification, the flexural strength of the composites increases by 53.0% due to the greatly strengthened interfaces. During thermal shock between 1100 °C and room temperature for 30 times, the strength continues to increase, attributed to the weakened interfaces in favor of fiber and CNT pull-out. By introducing CNTs at interfaces, thermal conductivity of the composites along the fiber axial direction decreases and that along the fiber radial direction increases. As the thermal shock process prolongs, since the carbon structure integrity of CNT and matrix in the modified composites is improved, the conductivity increases whatever the orientation is, until the thermal stress causes too many defects. As for the anti-ablation performance, the mass ablation rates of the CNT-modified composites with fibers parallel to and vertical to the flame decrease by 69.6% and 43.9% respectively, and the difference in the mass ablation rate related with fiber orientations becomes much less. Such performance improvement could be ascribed to the reduced oxidative damage and the enhanced interfaces.

Chlorella gloriosa (Chlorellaceae, Trebouxiophyceae) was isolated from seawater off the coast of the Dokdo Islands in Korea. An axenic culture was established using the streak-plate method on f/2 agar media supplemented with antibiotics, allowing identification of the isolate by morphological, molecular, and physiological analyses. The morphological characteristics observed by light and electron microscopy revealed typical morphologies of C. gloriosa species. The molecular phylogenetic inference drawn from the small-subunit 18S rRNA sequence verified that the microalgal strain belongs to C. gloriosa. Additionally, gas chromatography-mass spectrometry analysis showed that the isolate was rich in nutritionally important omega-3 and -6 polyunsaturated fatty acids and high-performance liquid chromatography analysis revealed that the high-value antioxidants lutein and violaxanthin were biosynthesized as accessory pigments by this microalga, with arabinose, galactose, and glucose as the major monosaccharides. Therefore, in this study, a Korean marine C. gloriosa species was discovered, characterized, and described, and subsequently added to the national culture collection.

The identification of biomarkers of a living tissues is essentially required to understand specific functions of the cells. In previous study, we reported IGFBP 3 as one of the putative biomarkers, by showing specific expression at porcine spermatogonial stem cells (SSCs) of early stage of porcine testis. In this study, we analyzed the expression of seven members of IGFBP family (IGFBPs) in SSCs and histological expression pattern of pregnancy-associated plasma protein-A (PAPP-A), which plays a role on the growth promoting enzyme by cleavage of IGFBPs in testis of 5 days old pig. RT-PCR analysis showed that IGFBP 1, 2, 3, 4, and 6 were expressed at high level specifically in porcine SSCs compared with whole testis. We performed immunohisotochemical staining of testis sections with PAPP-A and protein gene product 9.5 (PGP9.5) which are the known biomarkers for SSCs. We were not able to find co-expression of PAPP-A and PGP9.5; PAPP-A was expressed only in Sertoli cells and PGP9.5 expression was confirmed in spermatogonium. Additionally, we were able to confirm the GATA4 expression in Sertoli and Leydig cells as a regulator of Sertoli cell function was not detected PGP9.5 expressing cells, indicating indirect evidence of that cytolocalization of PAPP-A expression is limited in Sertoli cells. These results suggested that the PAPP-A expressed in Sertoli cells may play role on regulation of development and differentiation of testicular cells through the IGF axis in neonatal porcine testis.

지의류 추출물이 흰줄숲모기(Aedes albopictus)에 대하여 살충활성 및 생장 억제에 미치는 영향을 조사하였다. 2종의 지의류의 메탄올 추출물이 흰줄숲모기 3령 유충에 미치는 치사농도, 사충수, 생장억제를 알아보기 위한 실험을 진행한 결과Parmelia sp.엽상체 추출물경우 LC50농도는 0.13%로 나타났으며 Porpidia albocaerulescens의 LC50농 도는 0.45%로 나타나 Parmelia sp.의 추출물이 더 높은 살충활성을 보였다. 24h, 48h, 72h의 노출시간 따른 농도별 사충 수를 조사한 결과, 전반적으로 지의류의 메탄올 추출물이 고농도일수록, 노출시간이 길어질수록 유충의 사충 수는 증가하였다. Parmelia sp. 엽상체의 추출물에서 사육한 유충의 경우 용화시간은 대조군보다 지연되었고, 추출물의 농도가 높을수록 더 많은 시간이 지연된 것으로 보아 지의류 추출물이 흰줄숲모기 유충의 생장을 억제하는 효과가 있음을 확인하였다.