간행물
한국재료학회지 KCI 등재 SCOPUS Korean Journal of Materials Research
- 발행기관 한국재료학회
- 자료유형 학술지
- 간기 월간
- ISSN 2799-8525 (Print)2799-8681 (Online)
- 수록기간 1991 ~ 2024
- 주제분류 공학 > 재료공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제31권 제4호 (2021년 4월) 8건
논 문
1.
2021.04
구독 인증기관 무료, 개인회원 유료
Randy Adhiputra, Maisari Utami, Eko Agus Suyono, Arief Budiman, Poedji Loekitowati Hariani, Ani Setyo Pratiwi, Karna Wijaya
This research aims to study the simultaneous extraction and transesterification of Chlorella vulgaris (C. vulgaris) using microwave irradiation with methanol as solvent and potassium hydroxide (KOH) as catalyst. The microwave-assisted insitu transesterification of C. vulgaris is assessed at various ratios of biomass-to-methanol, reaction times, and catalyst concentrations during the centrifugation and evaporation process. Gas chromatography-mass spectrometry (GC-MS) analysis is performed to confirm fatty acid methyl ester (FAME) composition. Biodiesel preparation is carried out by simultaneous extraction and transesterification of microalgae from C. vulgaris. The product is then characterized using Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H-NMR); microalgae are observed using scanning electron microscopy (SEM). The highest amount of FAME is obtained at a biomass-to-methanol ratio of 1:12, reaction time of 40 min, and catalyst concentration of 2 wt%. Biodiesel shows conversion to about 77.64% of methyl ester (methyl myristate, methyl palmitoleate, methyl linoleate, methyl oleate, methyl arachidonate, and methyl 5,8,11,14,17-eicosapentanoate).
4,000원
2.
2021.04
구독 인증기관 무료, 개인회원 유료
A Y6-xCa1.5xSi11N20O:Ce3+(x=2.5) oxynitride phosphor is synthesized at 1,750 oC in a mixed gas atmosphere of 5% H2 and 95 % N2 by using YN, Ca3N2, Si3N4, and CeO2 as raw material reagents. The crystal structure is a trigonal crystal system that has a P31c (no.159) space group and has lattice parameters of a, b = 9.8876(3), and c = 10.6806(4). This structure is an Er6Si11N20O structure type in which a Y6-xCa1.5xSi11N20O structure is formed by substituting a trivalent Y3+ element and a bivalent Ca2+ element at the position of Er element having an oxidation number of +3. Here, the charge difference caused by different oxidation numbers is balanced by the occupancy of a partially vacant 2c site and an O/N anion ratio in the Er6Si11N20O structure type. The Y6-xCa1.5xSi11N20O:Ce3+ (x = 2.5) phosphor is yellow powder with yellow luminescence; performing Rietveld refinement on the phosphor on the basis of the data obtained by XRD measurement results in the lattice parameters as described above. The Y6-xCa1.5xSi11N20O:Ce3+ (x = 2.5) phosphor has a broad emission band due to Ce3+ as an activator with the center wavelength of 565 nm. This phosphor has a broader emission band than a YAG:Ce3+ phosphor, which is a representative LED phosphor, and thus extends further into the blue and red spectrum ranges. Accordingly, this phosphor is an interesting phosphor that can be used for 1pc-LED with an improved color rendering index.
4,000원
3.
2021.04
구독 인증기관 무료, 개인회원 유료
To solve the common problems of concrete preparation in low-temperature environments, calcium formate (C2H2O4Ca), anhydrous sodium sulfate (Na2SO4), triethanolamine (C6H15O3N), calcium bromide (CaBr2), and triisopropanolamine (C9H21NO3) are selected as early strength agents and mixed with C40 concrete in different dosages under low-temperature environments of 5 oC and 10 oC to develop a high-efficiency low-temperature compound early strength agent based on the effect of single-doped early strength agents. The effects of the compound early strength agent on the early strength of the concrete, the cement paste setting time, and cement fluidity at 5 oC and 10 oC are investigated, and the corresponding reaction mechanism is discussed from the perspective of micro-products. The best compound early strength agent ratio is found to be 2% of calcium formate + 0.08 % of TEA (C6H15O3N). The compound early strength agent effectively promotes the formation of hydration products, such as Ca(OH)2 and C-S-H gel. In comparison with the control group, the strength of the concrete cured for 18 h, 1 d, 3 d, and 7 d under simulated natural conditions at 5 oC increases by 700%, 540%, 11.4 % and 10 %, respectively, whereas at 10 oC, the corresponding values are 991%, 400%, 19.6 % and 11 %, respectively. The strength of the concrete at each age is close to the normal temperature standard of the curing strength. The addition of the compound early strength agent causes a reduction in cement fluidity and initial and final setting times, and also yields a good effect on the porosity of the early concrete.
4,600원
4.
2021.04
구독 인증기관 무료, 개인회원 유료
Strontium lanthanum vanadate La1-xSrxVO3 (LSVO) is a promising anode material for electrochemical devices, especially for solid oxide fuel cells, thanks to its irregular electrical conductivity. However, the known synthesis methods are incapable of producing well-dispersed LSVO nanoparticles (NPs) with homogeneous size distribution, which partly impedes the applicability of the material. Thus, a new approach to synthesize LSVO NPs with such characteristics is of paramount importance. In the present work, we successfully prepare LSVO NPs with a high dispersion degree and homogeneous size distribution via a modified co-precipitation pathway, followed by hydrogen reduction at a temperature as low as 700 oC. The prepared LSVO NPs display uniform sizes in the range of 50 ~ 100 nm and do not contain any secondary phases, according to XRD analysis. The chemical mechanism of reactions that occur to form the LSVO is thoroughly highlighted. The work functions of NPs measured by the UPS analysis are in the 2.13 ~ 3.62 eV range, making the LSVO powders promising for use in thermionic devices. An explanation of the role of Sr substitution in work function values of LSVO is also proposed.
4,000원
5.
2021.04
구독 인증기관 무료, 개인회원 유료
We confirm whether Zr powders can restrain a rapid nitrification reaction and offer a stable oxidation reaction according to temperatures in nitrogen gas purification. A pellet-type, porous Zr getter is prepared (diameter: 10 and thickness: 3 mm) using Zr powder with an average particle size of 45 μm. While maintaining the whole system, the Zr getter reaction is confirmed with an increase in temperature from 150 to 550 oC at increments of 100 oC under 99.999 % purity nitrogen atmosphere comprising of 10 ppm of impurity. Surface color, pore size, stabilized layer, and phase change are confirmed with optical microscopy, SEM-EDS, Micro-Raman, and X-ray diffraction (XRD) according to the Zr getter temperature. The surface color of the Zr getter changes from metallic silver to dark gray as temperature increases. In the EDS results, the nitrogen component is not observed, and oxygen content increases from each surface at elevated temperatures. The Raman and XRD results show the oxidation layer as a result of 350 oC annealing. Therefore, the Zr getter can be applied as a nitrogen getter under 5-nine purity nitrogen atmosphere after appropriate oxidized pre-stabilization process to prevent rapid nitrification reaction.
4,000원
6.
2021.04
구독 인증기관 무료, 개인회원 유료
Here, Zn ferrite is synthesized along with reduced graphene oxide (rGO) by a facile one-step hydrothermal method. The difference between the synthesized nanocomposites with those in other reported work is that the reaction conditions in this work are 160 oC for 12 h. The synthesized products are characterized by field-emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and attenuated total reflection. Further, the adsorption property of rGO–Zn ferrite (rGZF) nanocomposite is studied after confirming its successful synthesis. The adsorption capacity of rGZFs toward rhodamine B (RB) is ˃ 9.3 mg/g, whereas that of bare ZF nanoparticles is 1.8 mg/g in aqueous media. The efficiencies of rGZF and bare ZF to remove RB are 99 % and 20 %, respectively. Employing rGZF, 60 % of RB is decomposed within 5 min. The kinetic study reveals that the adsorption process of removing RB by bare Zn ferrite follows pseudo-firstorder kinetics. However, after zinc ferrite is incorporated with rGO, the kinetics changes to pseudo-second-order. Furthermore, the Langmuir isotherm is accomplished by the adsorption process employing rGZF, indicating that a monolayer adsorption process occurs. The thermodynamic parameters of the process are also calculated.
4,000원
7.
2021.04
구독 인증기관 무료, 개인회원 유료
We use vdW-corrected density functional theory (DFT) calculations with additional electron distribution correction to study the water binding chemistry of an Au nanoparticle supported on CeO2(111) with a linear step-edge. The initial structural model of Au/CeO2 used for DFT calculations is constructed by stabilizing a Au9 nanoparticle at the linear step-edge on a CeO2(111) slab. The calculated binding energy of a water molecule clearly shows that the interfacial site between Au and CeO2 binds water more strongly than the binding sites at the surface of Au nanoparticle. Subsequent water dissociation calculation result shows that the interface-bound water can be relatively easily dissociated into–OH and –H, providing a hydroxyl group that can be utilized as an oxygen source for CO oxidation. Based on the low dissociation energy of the interface bound water molecule, we suggest that the water at the Au-CeO2 interface can facilitate further oxidation of Au-bound CO. Our results point out that Au-CeO2 interface-bound water is beneficial for low-temperature oxidation reactions such as the water-gas shift reaction or preferential CO oxidation reaction.
4,000원
8.
2021.04
구독 인증기관 무료, 개인회원 유료
Electronic textiles promise to provide an intelligent platform to enlarge the scope of wearable electronic applications. Therefore, the combination of flexible energy storage devies into wearable systems is a key for operating these electronic textiles during bending, knotting, and rolling. Nonetheless, the application of fibrous supercapacitors consisting of a gel-electrolyte and carbon fiber electrode is still obstructed by low capacitance, low rate-performance, and poor cycling stability owing to the inefficient interface between the gel-electrolyte and electrode. Here, a fibrous supercapacitor is obtained using an optimized gelelectrolyte that improves the ionic diffusion capability. The optimized fibrous supercapacitor shows a superior electrochemical performance, including high specific capacitance of 41 mF cm−2 at current density of 2.0 μA cm−2, high-rate performance with 17 mF cm−2 at a current density of 15.0 μA cm−2, and outstanding cycling stability (88% after 3,000 cycles at a current density of 200.0 μA cm−2). The excellent energy storage performance is mainly attributed to the optimzied interface between the gelelectrolyte and electrode material, leading to an improved ionic diffusion capability.
4,000원
