The bentonite buffer material is a crucial component for disposing of high-level radioactive waste (HLW). Several additives have been proposed to enhance the performance of bentonite buffer materials. In this study, unconfined compression tests were conducted on bentonite mixtures as well as pure bentonite buffer material. Joomunjin and silica sands were added at a 30% ratio, and graphite was added at 3% along with bentonite. The unconfined compression strength (UCS) and elastic modulus of pure bentonite were found to be 20% to 50% higher than those of bentonite mixtures under similar dry density and water content conditions. This decrease in strength can be attributed to the reduced cross-sectional area available for bearing the applied load in the bentonitemixture. Furthermore, the 3% graphite-bentonite mixture exhibited a 10% to 30% higher UCS and elastic modulus compared to the 30% sand-bentonite mixtures. However, since the strength properties of additive-bentonite mixtures are lower than those of pure bentonite, it is essential to evaluate thermohydraulic-mechanical functional criteria when considering the use of bentonite mixtures as buffer materials.

For safe and economical spent fuel management, assessing the integrity of the cladding, which is the first barrier to the escape of radioactive material, is very important. For the sake of risk assessment, it is essential to calculate the probability of failure of the spent fuel rods loaded inside the cask during the transportation or storage. However, due to the large amounts of calculations required, it is not practical to analyze every detail of the spent fuel rods and assemblies. This study presents a methodology to perform a cask-level analysis by sequentially simplifying the fuel rods and spent fuel assemblies for the calculation of fuel rod failure probability. A simplified single fuel rod model was generated by considering the material properties of a high burnup fuel rod stored in dry storage for approximately 5 years and the interfacial bonding conditions of the cladding tube. The simplified model produces the same deflection as the detailed model at the critical moment that produces a fracture plastic strain of 1%. The developed single fuel rod simplified model is assembled in a CE 16×16 configuration, and a methodology is presented in which the CE 16×16 assembly model is once again replaced by a simplified model with a cuboidal shape. Compression analyses were performed on each part of the CE 16×16 model to obtain isotropic property data, and a simplified model was created based on those data and the cross-sectional second moment values of the parts. A cask drop analysis was performed to validate the similarity of the CE 16×16 model and the simplified model by comparing important structural responses such as impact acceleration. The 20 simplified fuel assembly models and one detailed model were loaded into a cask to perform the drop analysis. For the detailed model, the impact acceleration was extracted for different loading positions and the corresponding impact load and pinch load were derived. The spring force and contact force corresponding to the pinch load were extracted by applying a Python script technique to extract the maximum value of them exerted on each fuel rod. The vulnerability of spent fuel rods to bending loads and the failure criteria were considered during the simplification process of a single fuel rod. From the extracted impact and pinch loads, the probability of failure of the spent fuel rods as a function of impact acceleration can be calculated.

Considering the domestic situation where all nuclear power plants are located on seaside, the interim storage site is also likely to be located on coastal site. Maritime transportation is inevitable and the its risk assessment is very important for safety. Currently, there is no independently developed maritime transportation risk assessment code in Korea, and no research has been conducted to evaluate the release of radioactive waste due to the immersion of transport cask. Previous studies show that the release rate of radionuclides contained in a submerged transport cask is significantly affected by the area of flow path generated at the breached containment boundary. Due to the robustness of a cask, the breach is the most likely generated between the lid and body of cask. CRIEPI investigated the effect of cask containment on the release rate of radioactive contents into the ocean and proposed a procedure to calculate the release rate considering the socalled barrier effect. However, the contribution of O-ring on the release rate was not considered in the work. In this study, test and analysis is performed to determine the equivalent flow path gap considering the influence of O-rings. These results will be implemented in the computational model to assess sea water flow through a breached containment boundary using CFD techniques to assess radionuclide release rates. To evaluate the release rate as a function of lid displacement, a small containment vessel is engineered and a metal O-ring of the Helicoflex HN type is installed, which is the most commonly used one in transport and storage casks. The lid of containment vessel is displaced in vertical and horizontal direction and the release rate of the vessel was quantified using the helium leak test and the pressure drop test. Through this work, the relationship between the vertical opening displacement and horizontal sliding displacement of the cask lid and the actual flow path area created is established. This will be implemented in the CFD model for flow rate calculation from a submerged transport cask in the deep sea. In addition, the compression of the O-ring causes very small gaps, such as capillaries. In these cases, Poiseuille’s law is used to calculate the capillary flow rate.

The Republic of Korea (ROK), as a member state of the IAEA, is operating the State’s System of Accounting for and Control (SSAC) and conducting independent national inspections. Furthermore, an evaluation methodology for the material unaccounted for (MUF) is being developed in ROK to enhance capabilities of national inspection. Generally, physical and chemical changes of nuclear material are unavoidable due to the operating system and structure of facilities, an accumulation of material unaccounted for (MUF) has been issued. IAEA developed statistical MUF evaluation method that can be applied to all facilities around the world and it mainly focuses on the diversion detection of nuclear materials in facilities. However, in terms of the national safeguard inspection, an evaluation of accountancy in facilities is additionally needed. Therefore, in this research, a new approach to MUF evaluation is suggested, based on the Guide to the Expression of Uncertainty in Measurement (GUM) that an evaluation of measurement uncertainty factors is straightforward. A hypothetical list of inventory items (LII) which has 6,118 items at the beginning and end of the material balance period, along with 360 inflow and outflow nuclear material items at a virtual fuel fabrication plant was employed for both the conventional IAEA MUF evaluation method and the proposed GUM-based method. To calculate the measurement uncertainty, it was assumed that an electronic balance, gravimetry, and a thermal ionization mass spectrometer were used for a measurement of the mass, concentration, and enrichment of 235U, respectively. Additionally, it was considered that independent and correlated uncertainty factors were defined as random factors and systematic factors for the ease of uncertainty propagation by the GUM. The total MUF uncertainties of IAEA (σMUF) and GUM (uMUF) method were 37.951 and 36.692 kg, respectively, under the aforementioned assumptions. The difference is low, it was demonstrated that the GUM method is applicable to the MUF evaluation. The IAEA method demonstrated its applicability to all nuclear facilities, but its calculated errors exhibited low traceability due to its simplification. In contrast, the calculated uncertainty based on the GUM method exhibited high reliability and traceability, as it allows for individual management of measurement uncertainty based on the facility’s accounting information. Consequently, the application of the GUM approach could offer more benefits than the conventional IAEA method in cases of national safeguard inspections where factor analysis is required for MUF assessment.

Characteristics and useful effects for human health of antioxidant carbon nanodots contained in microwave-assisted Opuntia humifusa extract (MA-OHE(CD)) were investigated in this work. MA-OHE(CD) was characterized using transmission electron microscopy, dynamic light scattering analysis, X-ray diffraction, UV–vis spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform-infrared spectroscopy. Besides, total phenolic content and antioxidant activity of MA-OHE(CD) were measured. It was revealed that the MA-OHE(CD) increases aquaporin-3 expression in human epidermal keratinocytes cell with hydrophilic characteristics. Moreover, the bio-active compound extraction efficacy and antioxidant activity of microwave-assisted extraction were great when compared to maceration.

Pine Wilt Disease (PWD) is a disease causing mass deaths of pine trees in South Korea, and the dead trees serve as breeding grounds for insect vectors responsible for spreading the disease to other host trees. Because the PWD requires early monitoring to minimize its damage on domestic forestry, this study aims to develop a species distribution model for predicting the potential distribution of PWD by using artificial neural network (ANN) with time-series data. Among the architectures, the Convolutional Neural Network exhibited the highest performance, achieving a validation accuracy of 0.854 and a cross-entropy loss of 0.401, and the InceptionTime model emerged as the second-best performer. This study identified the best-performing ANN architecture for a spatiotemporal evaluation of PWD occurrence, emphasizing the importance for determining hyperparameters with ecological characteristics and data types to apply deep learning into SDMs.

Fall armyworm Spodoptera frugiperda (Lepidoptera: Noctuidae) is a polyphagous agricultural pest that damages about 80 species of plants. It mainly damages Poaceae and plants used as food resources for humans. Its original habitat is the American continent, but it unintentionally settled in tropical and subtropical Asia, including Africa, India, and Sri Lanka. It occurs every year even in southern China, which is geographically adjacent to the Korean Peninsula, causing damage to crops. In Korea, it was first discovered on Jeju Island in June 2019 and is being discovered every year in Jeju and some inland areas. In 2023, there were a total of 13 discoveries, including those in the Jeju and Jeonbuk regions. Quarantine agency identified the maternal genotypes of all currently discovered individuals using COI and identified differences in genetic traits between individuals using the sex-related Z-chromosome. For comparison with the information on the individuals that invaded the country, 15 individuals from Guangxi and Guangdong provinces in China were collected and secured. Through the analysis of overseas samples, a database has been added to compare genetic information with domestic invasive species, and the reliability of the analysis is expected to increase.

Solenopsis invicta, known as the red imported fire ant, is an insect native to South America. This species was unintentionally introduced into Australia, New Zealand, several Asian countries, Caribbean countries, and the United States. It shows a high survival rate and settlement potential in human-habitable and non-living areas such as tropical rainforests, disturbed areas, deserts, grasslands, and roads. In Korea, invasions of red fire ants have been reported every year since 2017, and two invasions were discovered in 2023. Quarantine agency analyzing the haplotype and colony social type of S. invicta for surveillance and control. Population genetic analysis using Microsatellite Alleleic data of 66 loci to trace the origin of the invasion. Through research cooperation with the United States Department of Agriculture (USDA), we have received samples and expanded our genetic information database. This study analyzed genetic differences between 15 invasive populations and 44 reference groups. As a result of microsatellite analysis, the domestic invasive population showed a genetic structure similar to those in Guangzhou, China, and Florida, USA.

사막이리응애(Neoseiulus californicus)는 칠레이리응애에 비하여 고온건조한 조건에서 유리하고 점박이응 애, 차응애, 차먼지응애 등 응애류 뿐만 아니라 가루이, 총채벌레 등 다양한 미소해충을 포식 포식하는 광식성 천적으로서 전세계적으로 산업화되고 있다. 사막이리응애를 농가수준에서 증식하기 위하여 간단한 대량생산 방법을 개발하였다. 천적의 먹이원인 가는다리고기진드기와 배지로서 밀기울(70%) 및 팽창질석(30%)을 멸균 팩에 넣고 사막이리응애를 사육하였다. 그 결과 사막이리응애의 밀도는 3주차에 18배로 증식되었다. 증식된 사막이리응애를 딸기 농장에 2월초부터 4월초까지 8주간 매주 투여한 결과 잎당 점박이응애의 밀도는 무처리구 에서 41.5마리이고 천적처리구는 7.0마리로서 점박이응애 방제효과가 83%로 나타났다. 본 연구를 통하여 자가 생산한 사막이리응애를 활용하여 딸기농가의 점박이응애 방제에 효과적으로 사용할 수 있을 것으로 판단된다.

경북 안동의 진걸맘농장은 딸기와 쪽 농사를 주로 하고 있으며 10년 이상 친환경 무농약 농법을 인증받은 농가로서 천적을 활용하여 토경 1,000평 규모의 시설 하우스에 딸기 재배를 하고 있다. 2018-2020에 경북농민사관학교 친환경 천적과정을 통하여 천적의 자가생산 기술을 배우고 2021년부터 농가에서 직접 자가생산을 시작하였다. 그래서, 진걸맘농가는 칠레이리응애를 자가사육하여 지속적으로 딸기 재배지에 처리함으로서 점박이응애 방제에 성공한 농업인으로서 국내 첫 사례로 꼽힌다. 또한, 2022년 안동시농업기술센터에서 안전농산물 생산을 위한 천적 배양시 스템 보급 시범 사업에 선정되어 딸기 해충의 생물적 방제를 위한 뿌리이리응애, 칠레이리응애, 보리뱅커플랜트 등의 천적 배양시설 완공, 천적의 자가생산 및 성공적인 현장적용 기술로서 농산물의 지역특화, 브랜드화를 통한 농산물 가격 차별화에 크기 기여하였으며 국내 천적농업의 발전을 위해 앞장서고 있는 선도농가로 인정받고 있다.

경북대학교 친환경농업연구센터에서는 농업인들의 효과적인 천적 활용을 증진시키기 위하여 2016년부터 경상북도 농민사관학교의 지원을 받아서 친환경천적 교육과정을 개설하고 천적 자가생산 및 현장적용 기술의 실습교육을 실시하였다. 그동안 토양 포식성 천적인 총채가시응애(Gaeolaelaps aculeifer)와 뿌리이리응애 (Stratiolaelaps scimitus), 그리고 점박이응애의 포식성 천적인 칠레이리응애(Phytoseiulus persimilis)와 사막 이리응애(Neoseiulus californicus)의 간편하고 경제적인 대량생산기술을 개발하고 그 기술을 약 180명의 농업 인에게 전수하였다. 즉, 농업인들이 스스로 천적을 자가생산하여 시설재배지에 적용함으로서 비용절감 및 청정 농산물 생산 효과를 높히는데 기여했다. 또한, 간편한 천적생산기술을 전국적으로 농업기술원, 농업기술센터, 그리고 친환경농업인단체 등 20여개 기관에 전수하였다. 최근, 경북의 농업기술센터(안동, 고령, 경주)에서 농업 인을 대상으로 천적 대량생산 시스템 보급 시범 사업을 실시하면서 뿌리이리응애 및 칠레이리응애 등의 천적 자가생산시설을 구축하고 자체적으로 생산함으로서 지속적인 천적 활용이 가능하게 되고 해충 방제 효과를 증가시킬 수 있었다. 즉, 농업인들이 직접 천적을 생산하고 활용하게 함으로서 천적농업의 성공사례가 증가하였 을 뿐만 아니라 국내 천적 공급 시스템이 다양화되어 천적농업의 활성화에 크게 기여한다고 판단한다.

Canine parvovirus-2 (CPV-2) has been reported worldwide as a major pathogen associated with acute hemorrhagic enteritis. The disease is a major infectious cause of death, particularly in young dogs. The earliest type of CPV-2 was replaced with three main subspecies, CPV-2a, CPV-2b, and CPV-2c, within a few years. Vaccination is carried out regularly, but the emergence of antigenic variants and the influence of maternal antibodies have limited the efficacy of commercial vaccines. New vaccines, such as the subunit vaccine, have been developed for alternative, safe, and effective vaccination. The baculovirus expression vector system (BEVS) is an excellent eukaryotic expression system with a high-level expression of foreign proteins and the ability of post-translational modification. Therefore, it is used widely to produce recombinant protein and subunit vaccines. In this study, the VP2 protein of CPV-2b cloned in the gateway vector system was generated using a baculovirus expression system in Spodoptera frugiperda (SF9) insect cells. Hemagglutination assay (HA) titers (24) were obtained, and the expression was detected in 6-His tagged VP2 and monoclonal antibody (mAb) against CPV-2 by western blotting. The VP2 protein of CPV-2b expressed in this study may provide a basis for a clinical diagnosis and vaccination applications for CPV-2.

This study investigated ethopabate (EPB) residues in edible tissues of broiler chickens given in drinking water and established the withdrawal time (WT) of EPB in poultry tissues. Twenty-four healthy Ross broiler chickens were orally administered with EPB at the concentration of 3.8 mg/L for 14 days (EPB-1, n=24) and 15.2 mg/L for 7 days (EPB-2, n=24) through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3, and 5 days, respectively. EPB residue concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient values ranged from 0.9980 to 0.9998, and the limits of detection and quantification (LOQ) were 0.03~0.09 and 0.1~0.3 μg/kg, respectively. Mean recoveries in muscle, liver, kidney and skin/fat tissues were 95.9~109.8, 108.7~115.3, 89.9~96.6 and 86.7~96.8%, respectively, and coefficient of variations were less than 17.11%. At the end of the drug-administration period (0 day), EPB was detected at levels under the LOQ in all tissues from both the EPB-1 and EPB-2 groups. According to the results of EPB residue in Ross broiler tissues, withdrawal periods of both EPB-1 and EPB-2 in poultry tissues were established to 0 day. In conclusion, the developed analytical method is suitable for the detection of EPB in poultry tissues, and the estimated WT of EPB in poultry tissues will contribute to ensuring the safety of Ross broiler chickens.

현재까지 전세계적으로 Periphyllus allogenes (개성진사진딧물)은 무시성충세대에 대한 형태학적 정보만이 보고되었다. 본 연구에서는 2021 년부터 2022년까지 한국 가평군, 홍천군에서 그동안 P. allogenes의 알려지지 않았던 간모, 유시성충 세대를 채집하여, 이들에 대하여 형태학적 정 보, 분포지역, 기주식물, 생태 사진을 처음으로 보고한다.

Due to the rapid development of technology, the environment is rapidly changing, and new regulations are emerging in the global society. In addition, environmental and social problems such as the pandemic and deepening social polarization have intensified, and the international community and investors have begun to regard ESG as a key factor in decision making. Regulations and systems reflecting ESG elements, such as the Carbon Neutral Act to cope with environmental problems and the Serious Disaster Act to cope with social problems, have already been enacted and implemented in major countries such as the EU and the Republic of Korea. In particular, the EU is pushing to publish ESG disclosure standards and make ESG disclosure mandatory next year. Given this trend, companies should consider ESG management as their business key strategy, as well as consumer characteristics and regulation.

Despite the importance of technology-based innovation and customer participation for both practitioners and academics, the impact of different customer participation types in new product innovation has rarely been addressed. Since consumers' positive assessment of new technologies leads to positive outcomes in the market, consumer evaluation of new technologies is important. Thus, examining the consumer perception of technology-based innovation including the different levels of customer participation is meaningful to new theoretical and practical insights.