Thirty three species in six subfamilies of Staphylinidae are recognized from Ulleung-do through the survey in 2001. Among them, Thirty one species are newly reported from Ulleung-do. Two species, Anotylus lewisius(Sharp) and Megarthrus aino Cuccodoro, are

본 실험에서는 재첩가공에 관한 기초자료를 제시 할 목적으로, 재첩국 제조시 가열시간에 따른 맛 성분의 조성변화에 관해 실험하였다. 재첩국은 원료 중량 당 2배량의 끓는 물을 가하여 0. 5. 10, 30, 60및 120분간 가열하였다. 가열시간이 증가함에 따라 수분함량은 감소하였으며, 단백질함량은 점차로 증가하였다. 가열 시간 30분에서 유리아미노산의 함량은 103.10 ㎎/100g으로 가장 높게 나타났으며, 30분 이후부터는 서서히 감소하였다. 유리아미노산 함량은 alanine의 함량이 가장 높았으며, 그 다음으로 proline, glutamic acid 및 glycine의 순이었다. 재첩국의 단백질 가수분해도는 가열시간 증가함에 따라 높게 나타났다. 비휘발성 유기산 함량은 succinic acid 함량이 가열시간 30분에서 137.08 ㎎/100 g으로 가장 높게 나타났으며, 그 다음은 oxalic aicd. malic aicd 및 lactic acid 순이었다. 따라서 재첩국 제조시 최적 가열시간은 30분이었다

분말 다시마로부터 정미성분의 효과적인 추출방법과 분말 조미료의 제조 조건을 검토한 결과를 요약하면 다음과 같다. 다시마에 함유된 정미성분의 추출은 열수 추출이나 효소분해법보다 70% ethyl alcohol 처리가 효과적이었으며, 분말제품의 수율을 높이기 위해서는 잔사를 다시 열수 추출시키는 것이 효과적이었다. 다시마 분말에 70% ethyl alcohol을 5배 량 가하여 25℃에서 1시간 추출하고 여과한 잔사에 다시 물을 15배 가하여 70℃에서 3시간 동안 추출하였을 때 고형물의 농도는 14.9%였다. 다시마 분말조미료는 ethyl alcohol 추출액을 막으로 통과시켜 분자량 5, 000 dalton이하 범위로 분획한 액을 진공동결건조하여 제품으로 하였다. 다시마 분말조미료 제품의 조성 중 탄수화물 함량이 64.9%로 가장 높게 나타났고, 총질소랑 및 아미노질소량은 3.7% 및 2.1%로 나타나 총질소량에 대한 아미노질소량의 비율은 56.8%이었다 그리고 상대습도 0.88에서의 흡습성은 8.4%, 용해성은 98.3%.건조수율은 14.7%였다.

초임계 이산화탄소를 이용하여 유자(Citrus junos)껍질의 향기성분을 추출하기 위해 동결건조한 유자과피분말을 4, 000psi와 40 에서 운전하면서 이산화탄소의 소비량에 따라 4단계로 분획하여 분획별 향기성분의 특성을 조사하였다. 초임계 이산화탄소에 대한 유자의 향기 성분의 수율은 0.011g/CO_2(L)였으며, 최대추출수율은 8.812g/kg이었다. 초임계 이산화탄소로 추출한 유자과피의 주요향기성분은 dl-limonene, γ-terpinene, linaollo, sabinene, β-myrcene, α-pinene, β-farnesene, α-terpineol 과 terpinolene 등 9종이었다. 분획별 향기성분은 휘발성이 높은 α-pinene, β-myrcene과 dl-limonene은 추출시간이 길어짐에 따라 함량이 감소하였으며, 이와 반대로 휘발성이 낮은 α-terpineol과 β-farnesene은 추출시간이 길어짐에 따라 함량이 증가하였다. 따라서 초임계 이산화탄소로 유자의 향기성분을 추출할 경우 추출시간에 따라 얻어지는 분획의 향기 성분 조성이 서로 다른 것으로 나타났다.

본 논문 에서는 강구조물의 설 계를 위한 가상하중 소 성활절 해석기볍이 연구되 었 다. 구조풀 의 기하학적 인 불완전성 올 가상하중 기법으로 고 려하였다. 본 해 석 기볍을 통하여 구조물 의 거동과 하증 지지 능력 을 직접적인 방법으로 예측할 수 있다. 즉 본 기법 은 강구조 설 계 에서 전통적으로 사용되고 있 는 유효길이 인 지 (K-fac tor) 의 계산 및 각 부재의 강도계산을 필요로 하지 않으므로써 다음 세대의 설 계기볍이라고 할 수 있다. 본 기볍 에 의하여 예측된 강도와 변위는 정확한 해라고 알려진 Plastic-Zone 해석 결 과와 비교 검증하였다， 본 기볍의 해석 및 설계 세 부 지침과 순서 를 제시하였으며， 본 해석기볍 및 AISC-LRFD 방법에 의하여 결 정된 부재크기 를 비교하였다. 본 해석기법은 실 제 설계에 효율 적 으로 사용될 수 있을 것으로 사료된다.

The purpose of this study was to determine the optimal sound absorption conditions by comparing the sound absorption characteristics of fresh and air-dried leaves of Quercus glauca, the main species of evergreen broadleaf trees (EBLT) in southern Korea. The sound absorption coefficients (SACs) obtained under 18 conditions were comparatively analyzed. The SAC of air-dried leaves improved significantly with increasing leaf layer thickness. The highest average SAC in the fresh leaf group was 0.617, which was observed under the condition of a leaf specimen size of 0.5 × 0.5 cm2 and a leaf layer thickness of 1.75 cm. In a group of air-dried leaves, this was 0.615 under the condition of a leaf specimen size of 0.5 × 0.5 cm2 and a leaf layer thickness of 2.50 cm. The maximum value of SAC for each wavelength was observed under the condition of a leaf layer thickness of 2.50 cm consisting of 0.5 × 0.5 cm2 leaf specimens, ranging from 1,400 Hz to 1,500 Hz.

This study was conducted to determine the number of days required to break a plant’s dormancy and promote subsequent crop growth in new varieties of Gomchwi through the 4℃ treatment. Three new varieties of Gomchwi namely, ‘Sammany’, ‘Gommany’, and ‘Damogy’ were observed in this study. The rate of leaf emergence of ‘Sammany’ after 15-day of 4℃ treatment was 100%, while ‘Gommany’, and ‘Damogy’ took 20-days and 10-days, respectively to reach to 97.9% rate of leaf emergence. After 10-days of 4℃ treatment, ‘Damogy’ grew faster than the other varieties. and Harvest time for ‘Damogy’ was on January 18th, after 5-days of 4℃ treatment and yield was observed to be the highest at 15-days of 4℃ treatment. ‘Sammany’ was next with a minimum of 10-days of 4℃ treatment, although 15-days is more preferred for better harvest. ‘Gommany’ on the other hand, did not grow enough for harvest by January 18th, and its harvest time was delayed to January 31st. It needed a minimum of 15-days and preferentially 20-days of 4℃ treatment to grow normally and be ready for harvest. The plant height, leaf length and leaf petiole length appeared to grow better by extending duration of the 4℃ treatment. The number of leaves of ‘Sammany’ and ‘Gommany’ varieties was three leaves for the 5-days treatment which may be due to the incomplete breaking of dormancy. Regarding the yield per plant, ‘Sammany’ yielded 112.3 grams (g) in 15-days treatment, and ‘Gommany’ yielded 106.5 g in 25-days treatment. In the case of ‘Damogy’, it yielded 123.5 g and 183 g in the 10-days and 25-days treatment respectively. It is concluded that ‘Damogy’, ‘Sammany’ and ‘Gommany requires 10, 15, and 20 days of 4℃ treatment to break the plant’s dormancy and promote better plant growth.

방사선작업종사자 및 방사선작업장의 위험성은 주로 피폭선량 값으로 평가되고 있다. 하지만, 방사선작업장은 사용하는 방사선 및 작업환경이 상이하다. 특히, 방사선투과검사작업장은 작업대상물, 차폐체 사용 가능 유무 등에 따라 작업환경이 다양하다. 따라서 효율적인 방사선 방호를 위해서는 여러 가지 인자들을 검토하는 것이 필요하다. 이에 전문가 및 조장 방사선작업종사자들 대상으로 설문조사를 수행하였으며, 그 결과, 방사선원, 방사선피폭선량, 작업장관리현황, 판독특이자, 정기검사현황이 주요인자로 선정되었다. 또한, 설문조사 중요도를 바탕으로 1차 가중치(안)을 설정한 후 2차적으로 전문가 자문을 통해 인자 내 세부 항목별 가중치를 선정하였다. 따라서 본 연구를 통해 선정된 주요인자를 바탕으로 하여 방사선투과검사작 업장 위해도 지수 모델 개발이 가능할 것으로 판단된다.

This study was conducted to compare the volatile flavor compounds of Artemisia annua L. after extraction by simultaneous steam distillation extraction (SDE) and solid-phase micro extraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) analysis. Via SDE and SPME processes, 79 (1,254.00 mg/kg) and 39 (488.74 mg/kg) compounds were identified respectively. The compounds extracted by SDE included 27 alcohols, 13 aldehydes, 22 hydrocarbons, 3 esters, 12 ketones, 1 oxide and 1 N-containing compound, on the other hand, using the SPME method, 7 alcohols, 5 aldehydes, 1 ester, 18 hydrocarbons, 7 ketones, and 1 oxide were extracted. The major volatile flavor compounds of Artemisia annua L. isolated by the two methods were caryophyllene oxide, -caryophyllene, camphor, -selinene, -muurolene, 1,8-cineol, (E)-pinocarveol and pinocarvone. β β γ The sesquiterpene named caryophyllene oxide was the most abundant volatile flavor compound with relative contents of 234.16 mg/kg and 195.44 mg/kg obtained by the SDE and SPME methods, respectively. Among the identified volatiles, sabinene, β-pinene, α-terpinene, γ-terpinene, yomogi alcohol, myrtenol, (Z)-nerolidol, p-cymen-8-ol and eugenol were detected by the SDE method only while (E)-anethole and α-cubebene were detected by the SPME method only. This study confirmed that the composition and contents of the volatile flavor compounds vary between different extraction methods. More volatile flavor compounds were identified using the SDE method than the SPME method.

Numerical Weather Prediction (NWP) models such as the Weather Research and Forecasting (WRF) model are essential for forecasting one-day-ahead solar irradiance. In order to evaluate the performance of the WRF in forecasting solar irradiance over the Korean Peninsula, we compared WRF prediction data from 2008 to 2010 corresponding to weather observation data (OBS) from the Korean Meteorological Administration (KMA). The WRF model showed poor performance at polluted regions such as Seoul and Suwon where the relative Root Mean Square Error (rRMSE) is over 30%. Predictions by the WRF model alone had a large amount of potential error because of the lack of actual aerosol radiative feedbacks. For the purpose of reducing this error induced by atmospheric particles, i.e., aerosols, the WRF model was coupled with the Community Multiscale Air Quality (CMAQ) model. The coupled system makes it possible to estimate the radiative feedbacks of aerosols on the solar irradiance. As a result, the solar irradiance estimated by the coupled system showed a strong dependence on both the aerosol spatial distributions and the associated optical properties. In the NF (No Feedback) case, which refers to the WRF-only stimulated system without aerosol feedbacks, the GHI was overestimated by 50–200 W m-2 compared with OBS derived values at each site. In the YF (Yes Feedback) case, in contrast, which refers to the WRF–CMAQ two-way coupled system, the rRMSE was significantly improved by 3.1–3.7% at Suwon and Seoul where the Particulate Matter (PM) concentrations, specifically, those related to the PM10 size fraction, were over 100 g m-3. Thus, the coupled system showed promise for acquiring more accurate solar irradiance forecasts.

This study was conducted with the aim of evaluating the antibiotic effects of leaves, stems, and roots in yacon (Smallanthus sonchifolius). Antibacterial activity of leaf extract by disk diffusion method with Bacillus subtilis and Escherichia coli respectively showed 13.3 and 13.75mm diameters of clear zone. There was no significant difference between the stems and leaves. The minimum inhibitory concentration of leaves’ heating and agitation extraction showed a restrain of strain at 1mg/ml, but the stems and root extract did not appear. Yacon is a functional antibacterial material, and methanol extraction is more effective than water. This research was to investigate the growth stage of collection has the most effective antibacterial effects. It has collected yacon's leaves from June to October, which is an appropriate time for collection right before reaping. Yacon leaf has antibacterial effects on Bacillus subtilis, Escherichia coli, Enterococcus faecium, and Salmonella enteritifis. There were no significant differences by the growth stage of collection. Leaves collected in July are high in phenol which helps in sulfating activity works well considering the high scavenging capability of DPPH. Leaves collected in September are high in total flavonoid.

Background : Heat stress induced from high temperature are known to crucially affecting on physiological properties and yield in Cnidium officinale. Methods and Results : The effect of foliar application of mixture including a urea, ascorbic acid and calcium chloride on high temperature injury of Cnidium officinale. Photosynthesis and leaf temperature in Cnidium officinale were investigated after cultivating for 24 hours at 35℃. Net photosyntheis rate, transpiration was measured at 1,000 μmol m-2 s-1 of photon flux density and leaf temperature was analyzed by thermal image. Net photosyntheis rate, stomatal conductance and transpiration rate in mixture traetment were 2 times of higher than in control. Water use efficience was not different significantly. Leaf temperature was lower in mixture treatment (25.3℃) than in control (29.0℃). Conclusion : This result show that foliar application of urea, ascorbic acid and calcium chloride was reducing a high temperature injury through a improving photosynthetical capacity and decreasing leaf temperature of Cnidium officinale.