본 연구에서는 고온 가열된 시멘트 페이스트에 나타나는 균열을 CO2 가스 노출을 통한 회복 거동에 대해 관찰하였다. 시 험체는 W/C 40 %의 시멘트 페이스트로 설정하였다. 전기가열로를 목표온도까지 도달시킨 후 가열로 상부에 부착하여 일면 가열을 실시한 후 가열된 면에 나타난 균열을 고배율 카메라로 촬영하였다. 촬영결과 CO2 가스 노출을 통한 회복 재령으로 인하여 시멘트 페이스트의 균열이 더 이상 진행되지 않은 것을 관찰하였다.

본 연구는 석탄가스화 슬래그를 재활용하기 위한 방안으로 콘크리트용 혼화재로서 사용하기 위해 석고혼입유무에 따른 콘크리트 건조수축 길이변화량을 측정하였다. 실험결과 석고 미혼입타입에서는 최대 15x10-3 의 길이변화량을 나타내어 OPC에 비해 굉장히 큰 변화량을 보이는 반면, 석고 혼입타입에서는 최대 10x10-3 의 길이변화량을 나타내어 OPC와 거의 동일한 수준으로 나타났고, 치환율에 따라서 적은 수준의 길이변화량도 확인하였다. 따라서 고로슬래그 미분말을 콘크리트 혼화재로 사용하는 것과 마찬가지로 CGS를 콘크리트용 혼화재로 사용하기 위해서는 석고의 혼입이 수반되어야 할 것으로 판단된다.

최근 건설분야에서도 스마트(Smart)라는 개념을 도입한 재료 및 구조방식의 개발에 관한 관심이 고조되고 있다. 특히 기존 콘크리트와 같은 시멘트 복합체에 다양한 전도물질을 혼입하여 외력의 작용시 유발되는 변형을 시멘트 복합체의 저항변화로 평가하는 자기 감지형 건설재료 개발 연구가 활발히 진행되고 있다. 통상적으로 시멘트 복합체는 인장변형에 대한 저항능력이 낮기 때문에 주로 압축변형과 전기적인 저항특성의 상관성을 평가하는 연구 즉, 압축변형 감지능력을 갖는 시멘트 복합체 개발에 관한 연구가 대부분이었다. 본 연구에서는 직접인장하에서 0.5% 인장변형시까지 자기 감지능력을 갖는 변형 경화형 시멘트 복합체(SHCC)를 개발하고 또한 철근의 보강이 SHCC의 자기 감지능력에 끼치는 영향을 평가한다.

In this study, to analyze the change of mass of concrete structure subjected to fire damage, cement paste was exposed at high temperature to maintenance time and analyzed mass change characteristics by TGA analysis. As a result of analysis, the mass reduction rate of cement paste decreased with increasing heating time after heating at high temperature.

In this study, CGS is a concrete admixture material that has been investigated as a way to promoto recycling of CSG. As results, Show that the early strength is low and the activity index is according to the degree of fineness is insignificant

In this research is underway to determine the exact damage level of concrete structures damaged by fire. Cement paste hardened at 700℃ was characterized by TGA. As the depth increased, the mass reduction rate increased and the mass reduction rate decreased as the retention time increased.

In this study, the bond strength of FRP reinforced inorganic adhesive developed in previous studies was exposed to high temperature. As a result of the experiment, it was confirmed that the bond strength was increased at room temperature in the range of 100 to 200 ° C, but the width gradually decreased with increasing temperature.

In this study, the chemical deformation of cement pastes was determined by chemical analysis. X-ray diffraction equipment was used to investigate the chemical transformation. The decrease of ettringite and the collapse of gypsum were confirmed and then the calcium hydroxide gradually decreased.

In the study, direct tensile test was conducted to perform statistical approaches to the maximum tensile strength of design strengths (120, 150 and 180 MPa), and then the direct tensile database construction was made to examine the reliability of the direct tensile test.

In this study, the chemical deformation of cement pastes was determined by chemical analysis. The specimen for FT-IR analysis was prepared in the form of fine powder by grinding before heating. As the temperature increased, the hydrates inside the cement paste tended to decrease.

In this study, we study the characteristics of thermal diffusion of cement paste at elevated temperature. Results of the experiments can be used to predict the fire damaged temperatures of concrete, and to recommend proper methods for repair and rehabilitation.

In this study, In this study, Simulation using COMSOL Multiphysics thermal flow program of A company was carried out for thermal diffusion analysis according to depth of concrete exposed to high temperature. As a result of the analysis, it was found that the thermal diffusivity decreased with the depth and the temperature difference decreased with the heating time.

In this study, In this study, Simulation using COMSOL Multiphysics thermal flow program of A company was carried out for thermal diffusion analysis according to depth of concrete exposed to high temperature. As a result of the analysis, it was found that the thermal diffusivity decreased with the depth and the temperature difference decreased with the heating time.

In this study, we study the characteristics of thermal diffusion of cement paste at elevated temperature. Results of the experiments can be used to predict the fire damaged temperatures of concrete, and to recommend proper methods for repair and rehabilitation.

This study investigates the pore structure of cement paste after exposing to elevated temperatures, up to 800°C. The variation of pore structure of each sample was monitored for 180 days by mercury intrusion porosimetry (MIP). Test results showed that the increase of heated temperatures causes the increase of the size and volume of pores, which is probably due to the dehydration of hydration products, such as calcium silicate hydrate and calcium hydroxide.

This study investigates the effect of elevated temperatures on the pore structure of cement paste which, in turn, can provides information to evaluate the damage level of concrete structures due to fire. Mercury intrusion porosimetry (MIP) test was conducted for this investigation. Test results showed that the higher the temperature, the higher is the pore volume of cement paste and the wider is the pore distribution.

This study reviewed sulfuric acid resistance of high acid resistance of inorganic binder based on industrial by-products. As the results of test, the mix of high acid resistance of inorganic binder showed the excellent chemical resistance against aqueous solution of 10% H2SO4 comparing to the mix of OPC, however, the mass of inorganic binder rather increased while approximately 3.4% of mass loss ratio appeared during 7 days of material age of soaking in case of using portland cement usually.

철골건축물은 화재시 강재의 내력저하로 인해 안전상의 문제가 발생하므로 내화피복을 실시하고 있다. 이때 국내에서 가장 많이 사용되고 있는 것이 내화뿜칠피복재로 초기제품에 대한 성능평가는 적절히 이루어지고 있으나 내구성에 대한 평가는 전혀 이루어지고 있지 못한 실정이다.이에 내화뿜칠피복재의 장기 내화성능 관리를 위하여 한국건설기술연구원에서는 내화뿜칠피복재의 유지관리지침(안)을 제시하였으나 세부적인 평가방법 보완 및 적용성 평가 등이 요구되었다.따라서, 본 연구에서는 이 내용 중 비교적 단기간에 내구성능평가가 가능한 촉진내구성 평가방법에 대하여 세부기준을 정하고 이에 대해 국내 3개사의 제품에 대한 적용성 평가를 실시하였다.<br>이는 향후 내화뿜칠피복재의 내구성관리에 이용할 수 있는 시험표준 작성의 기초자료가 될 것이며 제정될 표준의 적용성을 확인 할 수 있을 것이다.