검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 11

        1.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        고품질의 아가콩 음료개발을 위해 반응표면분석법에 의한 추출조건을 최적화 하였다. 아가콩 의 최적 볶음조건은 250 ℃, 30분으로 설정하였다. 추출시간, 추출온도에 따른 아가콩의 품질지표인 pH, 색도 및 이소플라본 함량은 1% 이내에서의 유의적인 영향을 미치는 것으로 나타났다. 추출온도와 추출시간이 길어질수록 이소플라본 함량은 높은 것으로 나타났다. 반응표면분석의 이소플라본 추출 공정 최적화 결과 추출온도는 99.5 ℃, 추출시간은 1.7 h으로 나타났으며, 이 조건에서 이소플라본의 최적 수 율은 10.63 μg/mL로 예측되었다.
        4,000원
        2.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study is carried out to analyze the velocity distribution for each location and the uniformity index according to straight distance on exit side by changing the design factors of branch pipe connected to 180° circular mixing-tee using RSM(Reynolds Stress Model) turbulence model. As the results of the flow characteristics according to hydraulic diameter, the velocity profiles in the 90° sectional area are generally similar. In the 180° section, the maximum velocity point shows Y/D=0.7~0.8 after rapid increase of the flow velocity. In the result according to the distance away from inlet, the maximum velocity point in the 90° sectional area is located in outer side of the curved pipe as the distance away from inlet increases. In the 180° sectional area, the maximum velocity point is showed in Y/D=0.7~0.8 after the rapid increase of the flow velocity regardless of the variation of branched distance. In case of inclined angle, the maximum velocity point in the 90° sectional area is located in outer side of the curved pipe as the inclined angle increases. In the 180° sectional area, the maximum velocity point is observed in Y/D=0.8 regardless of the inclined angle. In addition, the uniformity index of flow velocity shows that it is stabilizing after approximately L/D=40 away from the end of the curved pipe regardless of the flow factors in the branch pipe.
        4,000원
        3.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, velocity distribution characteristics by location and uniformity according to exit straight length in a 180° mixed pipes were numerically analyzed using RSM (Reynolds Stress Model) turbulent model by changing various flow parameters such as working fluids, inlet air velocity etc. As a result of it, the working fluids characteristics was highly indicated by the viscous force difference, the maximum velocity points according to main pipe’s inlet velocity were indicated when 90° sectional location was distributed at X/D=0.5~0.6 region and 180° sectional location was distributed at Y/D=0.5 region. And the flow characteristics according to branch pipe’s inlet velocity when 90° sectional location was distributed at X/D=0.4~0.6 region and 180° sectional location was distributed at Y/D=0.5 region. Based on the results that the most stable exit straight length in flow uniformity was indicated at L/D=25~30 region, 40D is suggested as the effective measurement distance in the straight pipe downstream curved pipe of mixed pipe.
        4,000원
        4.
        1997.04 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        금속분말 Fe와 Si에 KNO3(Fe+Si)무게비=0.2로 점화촉매 KNO3를 혼합하고 50MPa로 성형한 후 점화시키는 비기체연소합성(SHS; Self propagating High temperature Synthesis)법으로 출발 분말을 얻었다. 점화분위기를 공기 및 Ar으로 한 경우 XRD결과에서 특별한 차이가 없었고 두 경우 모두 SiO2피크가 검출되었다. 합성된 분말을 성형한 후 1190˚C환원분위기에서 소결하고 포석온도이하에서 열처리하여 반도성 FeSi2가 주상인 Fe-Si계 열전재료를 제조하였다. Fe/Si무게비=46/54,44/56 및 42/58시편의 제벡계수는 Si함량이 증가할수록 증가하였다. 점화후의 세척처리를 2단계로 하는 경우 제벡계수의 부호가 변화하여 p-type에서 n-type으로 변화하며 소결밀도가 크게 상승하였다. 조성에 관계없이 공통적으로 발견되는 SiO2는 점화시의 분위기보다는 점화촉매에 포함된 K성분이 소결 및 열처리시 산화제로 작용하여 형성되는 것이 확인되었다.
        4,000원
        5.
        2017.04 서비스 종료(열람 제한)
        As the importance of maintenance of reinforced concrete structures spreads, interest in the durability of structures is increasing. Among them, carbonation of concrete is one of the main deterioration factors of reinforced concrete structures. For quantitative evaluation of carbonation, many researchers are predicting carbonation considering water-cement ratio and environmental requirements. In this study, we studied the parameters based on the concrete made of ordinary Portland cement in the existing experimental data. The depth of carbonation deduced from the learning is applied to the carbonation by applying the deep learning.
        6.
        2016.10 서비스 종료(열람 제한)
        In order to study carbonation progress after surface repair of carbonated concrete, each carbonation penetration velocity from different repair materials of concrete structure is compared through the experiment of carbonation accelerating CO2 concentration to 100%
        7.
        2014.04 서비스 종료(열람 제한)
        On this study, carbonation rate and W/C ratio were estimated by collecting actual data of each carbonation depth and compression strength from inner wall, outer wall, stair hall, and balcony floor of certain remodeling apartments. Through above tests, this study can be reference data of the method of life time prediction for the apartments that subject to remodeling.
        8.
        2013.10 서비스 종료(열람 제한)
        On this study, carbonation rate and W/C ratio were estimated by collecting actual data of each carbonation depth and compression strength from inner wall, outer wall, stair hall, and balcony floor of certain remodeling apartments. Through above tests, this study can be reference data of the method of life time prediction for the apartments that subject to remodel.
        9.
        2013.04 서비스 종료(열람 제한)
        To predict the characteristics of chloride ion penetration in the concrete and rebar corrosion prediction for chloride ion permeation, it is important to understand the chloride ion diffusion coefficient. It is possible that the reinforced concrete structures can be predicted accurately by the profile of the position of the rebar chloride ions using a chloride ion diffusion coefficient. On this study, analysis of chloride ion diffusion coefficient experimented in Korea and the effect of changes in the surface chloride ions concentration on chloride attacked durability design was analyzed
        10.
        2006.02 KCI 등재 서비스 종료(열람 제한)
        본 연구는 단체종목과 개인종목 운동선수의 Ego-gram을 파악하고 단체종목과 개인종목의 운동선수 구분에 가장 큰 영향을 미치는 자아상태를 알아보고자 하였다. 이를 위하여 대학팀의 종목별 운동선수 총 240명을 표본으로 선정하였다. 빈도분석결과 단체종목, 개인종목 운동선수 모두 FC와 AC가 가장 높게 나타났으며, 단체종목 운동선수들의 FC와 AC가 개인종목 운동선수에 비해 높게 나타났다. 판별분석을 통하여 다섯 가지 자아상태(비판적 어버이자아: CP, 양육적 어버이자아: NP, 어른 자아: A, 자유스런 어린이자아: FC, 순응적 어린이자아: AC) 가운데 NP와 A가 단체종목과 개인종목의 운동선수 구분에 가장 큰 영향을 미치는 자아상태로 나타났으며, NP의 경우 단체종목 운동선수가 개인종목 운동선수보다 높게, A의 경우 개인종목 운동선수가 단체종목 운동선수보다 높게 나타났다.
        11.
        2003.08 KCI 등재 서비스 종료(열람 제한)
        연구의 주된 목적은 한국 투어프로 골퍼들의 시합 중 여러 가지 심리상태(집중력, 심상훈련, 목표설정, 루틴, 자신감)를 경기력(랭킹)과 비교해 보고, 각 변인간의 관련성을 검증해 보는 것이다. 제 45회 PGA 선수권 시합에 참가한 서수 중 47명의 프로골퍼들을 무선 표집 하여 분석대상으로 하였다. 측정도구는 운동선수들의 심리상태정도와 심리기술 연습정도를 알아보기 위해 개발된 MTE-1(Partington & Orlick, 1998)을 기본으로 한 GPQ(Lydia, 1999)를 사용하였다. MTE-1은 4가지 형식의 심리기술을 기본으로 한 39가지 세부항목으로 이뤄져 있고, GPQ(Golf Psychology Questionnaire)는 그중에서 20가지를 체택하였다. 분석결과, 가장 높은 상관관계를 보인 것은 프리샷루틴 이었다. 즉, 상위 랭킹 선수일수록 시합 중 프리샷루틴을 더 일정하게 지키는 것으로 나타났다. 일반적으로, 경기력이 높을수록, 시합 중 심리적 준비상태 또한 높은 것으로 나타났다. McCaffrey와 Orlick(1989)은 미국 PGA 투어선수들은 다른 골프선수들과 비교해서 시합 중 혹은 연습 중에 훨씬 효과적으로 심리적 준비기술을 사용한다는 것을 발견했다. 코치 혹은 레슨프로들은 골퍼들의 신체적, 기술적 면에서 많은 도움을 줄 수 있으나 적절한 심리적 기술을 지도하기엔 역부족이다. 골프 선진국인 미국, 호주, 혹은 유럽의 많은 PGA, LPGA 선수들이 이런 점을 실감하고, 스포츠 심리학자들과 상담을 시작하고 있다. 본 연구는 결과적으로 국내 PGA투어골프 선수들이 시합 중 심리기술을 이행하는 것은 최적의 능력을 수행하는데 밀접한 영향을 미친다는 결론을 내렸다.