The concern on the greenhouse gas emissions is increasing globally. Especially, the greenhouse gas emission from fisheries is an important issue due to Cancun Agreements Mexico in 1992 and the Kyoto protocol in 2005. Furthermore, the Korean government has a plan to reduce the GHG emissions as 5.2% compared to the BAU in fisheries until 2020. However, the investigation on the GHG emissions from Korean fisheries has not been executed much. Therefore, the quantitative analysis of GHG emissions from Korean fishery industry is needed as the first step to find a relevant way to reduce GHG emissions from fisheries. The purpose of this research is to investigate which degree of GHG emitted from the major coastal fisheries such as coastal gillnet fishery, coastal dual purpose fishery, coastal pots fishery and coastal small scale stow net fishery. Here, we calculated the GHG emission from the fisheries using the LCA (Life Cycle Assessment) method. The system boundary and input parameters for each process level are defined for LCA analysis. The fuel use coefficients of the fisheries are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for the unit weight of fishes are also calculated with consideration to the different consuming areas. The results will be helpful to understand the circumstances of GHG emissions from Korean fisheries.

This study is aimed to design the mechanical gascyclone precipitator with an outstanding collection efficiency as one of ways to reduce exhaust gas of small-scale vessels. It estimated fine particles generated from diesel engines which has become one of the biggest environmental issues currently. Specifically, it quantitatively analyzed the flowing process from the cyclone gas exit; a duct via part to the collecting part of Cylindrical lower using DPIV (Digital Particle Image Velocimetry). Since the gas inlet height part became wider the previous theoretical dimensions, internal fluid characteristics of cyclone where the speed of internal swirl had been slow were investigated by temporary streamline of fine particles at 14-20 ㎛. The results showed that collecting efficiency was three times higher than the conical type utilized previously. In addition, this study supplemented imprecision problems from the previous theoretical equation and CFD interpretation with an experimental method. It also provided a basic data to design the cyclone precipitator by size of diesel engines for vessels.

This study aims to estimate the species, size and shape of fish using a non-contact 3 dimensional pattern laser so that this preliminary test was carried out to understand the structural feature and length of goldfish according to water turbidity and depth in the aquacultural tank. 3-D pattern laser could clearly detect its morphological shape except the caudal fin due to soft tissue. Since the sensing strength of line laser light according to depth has sufficient power, it is possible to measure its depth and structural feature in the detected range. The result showed that the measured error of individual’s fork length was less than ±1% in the water using 3-D pattern laser, when compared with the measured value in the air.

We have investigated the crystallization mechanism of the lithium disilicate (Li2O-2SiO2, LSO) glass particles with different sizes by isothermal and non-isothermal processes. The LSO glass was fabricated by rapid quenching of melt. X-ray diffraction and differential scanning calorimetry measurements were performed. Different crystallization models of Johnson- Mehl-Avrami, modified Ozawa and Arrhenius were adopted to analyze the thermal measurements. The activation energy E and the Avrami exponent n, which describe a crystallization mechanism, were obtained for three different glass particle sizes. Values of E and n for the glass particle with size under 45 μm, 75~106 μm, and 125~150 μm, were 2.28 eV, 2.21 eV, 2.19 eV, and ~1.5 for the isothermal process, respectively. Those values for the non-isothermal process were 2.4 eV, 2.3 eV, 2.2 eV, and ~1.3, for the isothermal process, respectively. The obtained values of the crystallization parameters indicate that the crystallization occurs through the decreasing nucleation rate with a diffusion controlled growth, irrespective to the particle sizes. It is also concluded that the smaller glass particles require the higher heat absorption to be crystallized.

This study aims to estimate the Green-House-Gas emissions from domestic farmed flounder in the southern sea and Jeju-Do, where is mainly produced, by the assessment of energy consumptions and GHG emissions from domestic fish farms for establishing reduce standards of greenhouse gas from a sustainable perspective. It needs to analyze such GHG emission components as feed, electricity, fuel, fixed capital, fish respiration, and liquid oxygen in two locations by 4 stage running water type farm size of small, small and medium, large and medium, large scale. The result showed that the mean GHG emissions were 36.83 kg·CO2/year in the southern sea and 24.33 kg·CO2/year in Jeju-Do, respectively, in the stage of production per fish 1kg at 2 locations and farm size from domestic farmed flounders, and it will give to be useful for policy, planning, and regulation of aquaculture development with establishing GHG reduction standards.

The coastal stow net (stow net hereafter) in Korea is one of the major fishing methods for yellow croaker (Larimichthys polyactis), ribbon fish (Trichiurus lepturus), and anchovy (Engraulis japonicus). In terms of energy efficiency, the stow net fishery is more competitive than towing fishing gears such as trawl gears. The fishing vessels in stow net fishery have consumed less fossil fuel and also have had less carbon dioxide emission into the atmosphere. however, the stow net fishery is necessary to be regulated due to its increased output of the fleet. Therefore, it is required for fisheries authorities to manage the fishing capacity or fishing power for the assurance of fishery’s sustainability. For fisheries management authorities, it is necessary to quantify data related to fishing capacity and fishing power to deploy fishery policy in a sustainable way. In terms of data for decision-making, Data envelopment analysis (DEA) method was conducted to estimate fishing capacity. Fishing power index (FPI) was also applied to calculate relative fishing power to approach the problem in a quantitative way.

This study analyzed the safety management efficiency through input-oriented BCC Model using DEA by making of Models, in which this study selected the number of staff affiliated with the construction site, number of staff members on the construction team, and number of safety personnel as Input Factor, along with the number of disaster victims and zero-accident accomplished hours as output elements, targeting 40-or-so apartment building construction sites which are being built by 3 domestic construction companies. As a result of efficiency, it was 0.643, the number of efficient DMU was 4. In the aspect of returns to scale, 21 construction sites(52.5%) found to be in a state of increasing returns while 14 construction sites(35%) was in a state of Decreasing returns. The reason for inefficiency was found to lie in technical factors in case of 30 construction sites(75%). Lastly, inefficient DMU is in need of 38.9 % and 66% reduction in site personnel and safety personnel. Based on study results, the 29 construction sites accounting for 72.5% of DMU for safety management efficiency evaluation object turned out to do inefficient safety management that doesn't fit the size of each company.

Fish exportation using airplanes incurs sizable logistics costs (12,000KRW/kg), according for more than 45% out of the total export cost. Thus, it is unreasonable to quantitatively expand fish exportation by means of air transport. In addition, cases of failing to deliver fish at the right time to the right place occurs frequently due to the limited cargo capacity and insufficient cargo space of airplanes, especially during the peak season. Therefor, a technology that not only minimizes the logistics costs but also transports fish freshly and safely, in the case of long distance exportation to countries such as the United States and Taiwan, should be developed. In this study, a live fish container control system for long distance transportation was designed and implemented. Live flatfish (2,000kg) were selected as the target fish, were transported to the United States to analyze and verify the performance of the a live fish container control system and transportation ability.