An “online respiratory infectious disease nursing simulation course” was developed to strengthen the nursing competency in respiratory infectious disease. Methods: In this methodological study, an “online respiratory infectious disease nursing simulation course” was developed using the ADDIE (Analysis, Design, Development, Implementation, and Evaluation) model and evaluated using a one-group pre-post quasi-experimental design to ascertain the respiratory infectious disease knowledge, performance confidence, and clinical performance of 37 nursing students. Results: The online course comprised 17 sessions categorized as follows: seven theory, five at-home laboratory training, two case study, and three simulation sessions. All the nursing students engaged in the course successfully fulfilled its requirements by attending all 17 sessions and passing the clinical performance examination. The knowledge, confidence, and clinical performance (t=-6.60, -10.62, and –6.36, respectively; p<.001 for all) pertaining to respiratory infectious disease significantly increased among participants after the concluding simulation session, compared with their pre-scores obtained prior to the course participation. Conclusion: The “online respiratory infectious disease nursing simulation course” significantly improved the nursing knowledge, performance confidence, and clinical performance ability of nursing students in managing respiratory infectious diseases.

As the online dating service market continues to grow, damages or crimes due to the posting of false profiles have also emerged as a serious social issue. This calls for regulations on not only the users but also the service providers so that this issue could be resolved at a low cost. Ex-ante regulations on the service providers can be divided into regulations through law and regulations through terms and conditions. Although Act on Promotion of Information and Communication Network Utilization and Information Protection, etc. and Marriage Brokers Business Management Act partly apply to the former, laws should be enacted and revised for sufficient regulation. Regarding the latter regulation through terms and conditions, there is no standard terms that could be directly applied to online dating services. Ex-post regulations on service providers are divided into sanctioning through punishments or administrative punishments and sanctioning through compensation for damage in civil actions, the latter of which has been proven to be more effective. If a provider had made it appear as if it would provide genuine profiles, it would generally be liable for nonfulfillment of obligation for posting fake profiles. Tort liability may be recognized if a provider has not taken all possible measures to manage and control the false profiles. Although the regulations on the services may seem to be a burden on the service providers, it is also a way to contribute to the market’s long-term growth. Regulatory mechanisms have so far been lacking, but acts and standard terms are expected to be revised as the number of legal disputes continues to increase, thus accumulating related precedents.

In this study, quantum dot-sensitized solar cells (QDSSC) using CdSe/ZnS quantum dots (QD) of various sizes with green, yellow, and red colors are developed. Quantum dots, depending their different sizes, have advantages of absorbing light of various wavelengths. This absorption of light of various wavelengths increases the photocurrent production of solar cells. The absorption and emission peaks and excellent photochemical properties of the synthesized quantum dots are confirmed through UV-visible and photoluminescence (PL) analysis. In TEM analysis, the average sizes of individual green, yellow, and red quantum dots are shown to be 5 nm, 6 nm, and 8 nm. The J-V curves of QDSSC for one type of QD show a current density of 1.7 mA/cm2 and an open-circuit voltage of 0.49 V, while QDSSC using three type of QDs shows improved electrical characteristics of 5.52 mA/cm2 and 0.52 V. As a result, the photoelectric conversion efficiency of QDSSC using one type of QD is as low as 0.53 %, but QDSSC using three type of QDs has a measured efficiency of 1.4 %.

Flexible dye-sensitized solar cells using binder free TiO2 paste for low temperature sintering are developed. In this paste a small amount of titanium gel is added to a paste of TiO2 nanoparticle. Analysis of titanium gel paste prepared at 150 ℃ shows that it has a pure anatase phase in XRD and mesoporous structure in SEM. The formation of the titanium gel 1- 2 nm coated layer is confirmed by comparing the TEM image analysis of the titanium gel paste and the pristine paste. This coating layer improves the excited electron transfer and electrical contact between particles. The J-V curves of the organic binder DSSCs fabricated at 150℃ shows a current density of 0.12 mA/cm2 and an open-circuit voltage of 0.47 V, while the titanium gel DSSCs improves electrical characteristics to 5.04 mA/cm2 and 0.74 V. As a result, the photoelectric conversion efficiency of the organic binder DSSC prepared at low temperature is as low as 0.02 %, but the titanium gel paste DSSCs has a measured effciency of 2.76%.

The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.

인터넷과 스마트폰의 보급과 함께 사람들은 관심 있는 정보를 포털사이트에서 실시간으로 검색할 수 있게 되었다. 그에 따라 빅데이터가 비정형적으로 형성되고 이를 이용하기 위한 연구 분야가 발전하고 있다. 최근 식품분야 에서도 빅데이터를 활용한 연구의 필요성이 꾸준히 제기 되고 있다. 본 연구는 국내 최대 규모의 포털 사이트인 네이버의 검색 통계를 활용하여, 사람들의 연관 검색어 빈도에 따른 식품안전 사고 원인 식품과 식중독 원인 병원 체들의 관계를 분석하였다. 특히 식중독과 관련된 식품과 식중독 원인 병원체의 포털사이트 키워드 검색 건수와 해당 원인 식품 및 병원체의 뉴스검색 건수를 분석하였으며, 최종적으로 키워드 검색 건수와 실제 식중독 발생 시기의 상관관계를 분석하였다. 분석결과, 일반적으로 식중독 발생 직후 관련 키워드 검색 건수가 증가하는 것으로 나타 났으며, 특별하게 굴과 같은 계절성 식품의 경우 키워드 검색 건수 증가 이후에 식중독 사고가 발생한 것으로 나타났다. 따라서 본 연구결과를 통해 검색 건수가 증가하는 식중독 세균이나 식품들을 식중독 사전 예방적 차원의 정보로 활용할 수 있다면 식중독 사고 발생 가능성을 낮출 수 있을 것으로 사료된다.

We have investigated the crystallization mechanism of the lithium disilicate (Li2O-2SiO2, LSO) glass particles with different sizes by isothermal and non-isothermal processes. The LSO glass was fabricated by rapid quenching of melt. X-ray diffraction and differential scanning calorimetry measurements were performed. Different crystallization models of Johnson- Mehl-Avrami, modified Ozawa and Arrhenius were adopted to analyze the thermal measurements. The activation energy E and the Avrami exponent n, which describe a crystallization mechanism, were obtained for three different glass particle sizes. Values of E and n for the glass particle with size under 45 μm, 75~106 μm, and 125~150 μm, were 2.28 eV, 2.21 eV, 2.19 eV, and ~1.5 for the isothermal process, respectively. Those values for the non-isothermal process were 2.4 eV, 2.3 eV, 2.2 eV, and ~1.3, for the isothermal process, respectively. The obtained values of the crystallization parameters indicate that the crystallization occurs through the decreasing nucleation rate with a diffusion controlled growth, irrespective to the particle sizes. It is also concluded that the smaller glass particles require the higher heat absorption to be crystallized.

본 연구는 서울지역에 위치한 대학생들을 대상으로 식품기업의 위기상황에서 기업의 사회적 책임활동에 대한 소비자의 인지가 기업이미지 및 재구매 의도에 미치는 영향을 알아보기 위하여 수행되었다. 식품기업 N사를 분석사례로 선정하고 실제사건을 인용한 설문지를 사용하여 대학생 235명을 대상으로 기업의 사회적 책임활동을 인지하기 전과 후의 기업이미지와 재구매 의도에 대한 변화를 측정하고 통계분석을 실시하였다. 사회적 책임활동에 대해 인지하기 전과 후의 기업이미지를 측정한 8문항과 재구매 의도를 측정한 5문항에 대한 대응표본 T검증을 실시한 결과, 기업이미지에 관한 8문항 모두 유의수준이 0.05보다 작게 나타나 통계적으로 유의함을 확인하였다. 이로써 기업의 사회적 책임활동에 대한 소비자의 인지가 식품기업의 위기상황에서 기업이미지를 긍정적으로 변화시킬수 있다는 결론을 채택하였다. 같은 방법으로 재구매 의도에 관한 변화를 측정하고 분석한 결과, 제품의 만족과관련된 문항을 제외하고는 모두 유의수준이 0.05보다 작게 나타나 통계적으로 유의함을 확인하였다. 따라서, 본 연구는 향후 식품안전사고의 발생, 즉 식품기업의 위기상황에서 소비자들에게 기업이 실시하고 있는 사회적 책임활동을 인지시키는 것이 기업이미지와 재구매 의도를 긍정적으로 변화시키는데 기여할 수 있다는 주장의 기초자료로 활용될 수 있을 것이며, 앞으로도 기업의 사회적 책임활동이 기업의 위기상황에 어떠한 영향을 미치는지에 대한 다양한 측면에서의 연구가 필요하다고 사료된다.

The purpose of this study is to analyze the LOHAS tendency of new seniors' and its effects on the attitude and purchase intention for environmental-friendly food materials. Data were collected through a questionnaire survey from random sample of 162 senior customers in Seoul and Kyunggi area. The LOHAS tendency of new seniors can be divided into three factors; environmental-friendly, sustainability and sociality. Environmental problems affected the environmental-friendly factor the most while manufacturing techniques for sustainable products and recycling habits were key variables for the sustainability factor. The idea of companies sharing their value system of LOHAS tendency was the most significant for the sociality factor. Each of these LOHAS tendency factors influenced the purchase intention of the new seniors.

A Li2O-2SiO2 (LS2) glass was investigated as a lithium-ion conducting oxide glass, which is applicable to a fast ionic conductor even at low temperature due to its high mechanical strength and chemical stability. The Li2O-2SiO2 glass is likely to be broken into small pieces when quenched; thus, it is difficult to fabricate a specifically sized sample. The production of properly sized glass samples is necessary for device applications. In this study, we applied spark plasma sintering (SPS) to fabricate LS2 glass samples which have a particular size as well as high transparency. The sintered samples, 15mmφ×2mmT in size, (LS2-s) were produced by SPS between 480˚C and 500˚C at 45MPa for 3~5mim, after which the thermal and dielectric properties of the LS2-s samples were compared with those of quenched glass (LS2-q) samples. Thermal behavior, crystalline structure, and electrical conductivity of both samples were analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and an impedance/gain-phase analyzer, respectively. The results showed that the LS2-s had an amorphous structure, like the LS2-q sample, and that both samples took on the lithium disilicate structure after the heat treatment at 800˚C. We observed similar dielectric peaks in both of the samples between room temperature and 700˚C. The DC activation energies of the LS2-q and LS2-s samples were 0.48±0.05eV and 0.66±0.04eV, while the AC activation energies were 0.48±0.05eV and 0.68±0.04eV, respectively.

초등 신규교사가 직면하는 여러 가지 어려움을 해소하기 위해서는 그들의 요구에 부합하는 직무역량 강화교육 프로그램이 설계되어야 한다. 그러나 지금까지의 프로그램 설계는 체계적인 요구 분석과 프로그램 개발모형에 기초하지 않았다. 이에 본 연구는 이러한 한계를 극복하여 초등 신규 교사 직무역량 강화 프로그램을 설계하려는 목적으로 수행되었다. 본 연구의 프로그램 설계는 IPO(Input-Process-Output) 모형에 따라, 다양한 대상과 수준의 요구분석, SME의 자문을 통한 프로그램 구성요소 협의 및 교육과정 설계, Kirkpatrick(1998)의 평가모형을 활용한 평가 및 프로 그램 개선방안 제시까지의 체계적인 과정으로 진행되었다. 초등 신규교사와 학교 현장 전문가들의 실제적인 요구를 충실히 반영한 결과, 학교 현장의 맥락에 부합하는 초등 신규교사 직무역량 강화 과정이 설계되었다. 그렇게 설계된 교육과정은 학생이해, 학급경영 및 생활지도, 교수학습, 그리고 교직소양 역량을 강화하기 위한 교수요목, 교수방법, 학습시간 등으로 구성되었다. 끝으로, 본 연구의 결과가 주는 시사점을 신규교사, 단위학교, 교원양성기관, 그리고 교원연수기관 등 다양한 주체 별로 논의하였다. 본 연구는 체계적이고 실제적인 교육과정 설계 사례로서 교직현장 신규교사의 입직 초기 적응을 돕고, 초등교육 유관 조직에 기여할 수 있을 것으로 기대된다.