Gate valves are hydraulic components used to shut-off the water flow in water distribution systems. Gate valves may fail owing to various aspects such as leakage through seats, wearing of packing, and corrosion. Because it is considerably challenging to detect valve malfunctioning until the operator identifies a significant fault, failure of the gate valve may lead to a severe accident event associated with water distribution systems. In this study, we proposed a methodology to diagnose the faults of gate valves. To measure the pressure difference across a gate valve, two pressure transducers were installed before and after the gate valve in a pilot-scaled water distribution system. The obtained time-series pressure difference data were analyzed using a machine learning algorithm to diagnose faults. The validation of whether the flow rate of the pipeline can be predicted based on the pressure difference between the upstream and downstream sides of the valve was also performed.

쇠고기 이력추적제는 소 개체마다 이력번호를 부여하여 수입쇠고기가 한우고기로 둔갑하는 사례를 막고, 소비자 에게 구입한 한우고기의 세부 이력 정보들을 제공하는 데 도움을 준다. 이번 연구는 2021년-2022년 서울지역 대형 축산물판매업소에서 유통되는 한우고기 344건에서 DNA 동일성 검사를 실시하여 이력번호 등 주요 표시정보들의 진위를 판별하였다. 그 결과 45건(13.1%)에서 이력번호가 불일치한 것으로 확인되었다. 불일치율은 2021년(14.7%) 에 비해 2022년(11.3%) 감소하였고, 도심서북권 20.7%, 동 북권 14.4%, 서남권 및 동남권 10.2% 순으로, 북부권 (16.9%)이 남부권(10.2%)에 비해 높게 나타났다. 또한 6개 브랜드 중 B사 및 D사는 이력관리가 양호한 반면, E사 및 A사는 이력관리가 취약한 것으로 확인되었고, 통계적 으로 유의한 결과 차이를 보였다(P<0.001). 이력번호 불일 치 시료의 실제 이력번호는 업소 내 입(출)고 거래내역 자 료를 근거로 조사하였고, 그 결과 실제 이력번호 확인율 은 53.9%에 불과하였으나, 확인된 범위 내에서 시료의 표 시정보 진위 판별 결과, 거짓 표시는 이력번호 13.1%, 성 별 2.9%, 도축장명 2.2%, 등급 1.6% 순으로 나타났고, 품종 (한우) 거짓 표시는 없었다. 거짓 표시 축산물의 유통 차 단을 위해 표시정보의 신속한 진위 판별이 중요하므로 업 소 내 이력번호가 기재된 날짜별 부분육 소분할 작업내역 작성을 의무화하는 법적 근거 마련이 필요하다. 본 연구 결과는 투명한 축산물 유통 거래 질서 정착을 위한 이력 관리 방향 설정에 참고자료로 활용하고자 한다.

Black carbon (BC), which is mainly contained in fine particulate matters, is one of the typical anthropogenic air pollutants that are generated from the incomplete combustion process and discharged into the atmosphere, and its various health effects particularly on children have been a growing concern. In this study, BC and particulate matters were closely analyzed in an elementary school adjacent to a high- traffic road in a large metropolitan city. The investigation showed that black carbon behaved similarly to ultrafine dust of 0.3 μm or less in the air, accounting for 20%-40% of it. The occurrence of high concentration outdoor pollution influences the BC content in indoor particulate matters. The average I/O value was 0.7 during the class-hours, and 0.8 without students. However, when students played in the classroom, the range of BC concentrations varied from 0.25 to 1.15, wider than 0.41-1.13 without students. Although this study was conducted with regard to just one elementary school, it can be considered to represent the typical air quality status of domestic schools, and it is believed to present valuable data which can be utilized to assist with preparing measures to enhance the air quality management of schools.

This study examines the design intent and the construction background of the UNESCO House in Korea planned in the 1950s, with a focus on the initial plans of the House by Kuzosa Architects & Engineers in 1959. To this day, the House has been evaluated as a representative example of an office building in the 1960s, and an early case of introducing curtain walls in Korea. However, only its technical characteristics have been explored with less emphasis on further research data. This study attempts to demonstrate the social and cultural expectations and the demands of the construction of the House by examining the documents produced at the time and the initial plan. This study also highlights the fact that the House was the first project of the architect Pai Ki Hyung to realize high-rise reinforced concrete construction in Seoul’s dense center. In the 1950s, the House was planned as a modern building with a complex of various cultural facilities and offices due to the character of activities of the Commission, and the lack of public cultural facilities in Korea. The plan of the Kuzosa Architects & Engineers was selected through a design competition held in 1959. The House was completed in 1967, which took about eight years from planning to completion with design modification in the 1960s. The initial plan submitted before the design modification shows that Pai used the vocabulary and logic of modern architecture and planned the House not as a simple office building but as a complex cultural facility.

This study evaluated the quality characteristics and antioxidant activities of cookies after adding black ginseng powder at ratios of 0%, 1%, 3%, 5%, and 7%, and the potential of black ginseng as a functional food. The moisture content increased with an increase in the black ginseng powder content while the pH decreased. The L value d ec reased with increase in the black ginseng powder content while the a and b values increased. The hardness decreased with increase in the black ginseng powder content. Notably, antioxidant activities, such as 2,2-diphenyl-1-picryl-hydrazyl (DPPH), 2-2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) radical scavenging showed the highest increases in cookies containing 7% black ginseng powder. The total phenol and flavonoid contents significantly increased according to the amount of black ginseng powder added. These results suggest that black ginseng powder can be applied to cookies to achieve high quality and antioxidant activity.

본 연구는 메디컬 스킨케어 종사자의 실무 경력에 따라 직무의 적합도와 중요도, 빈도, 난이도에 차이가 있는지 실증적으로 분석하여 관계를 살펴봄으로써 현장에서 효율적인 직무를 수행하는데 도움이 되는 것을 목적으로 한다. 분석방법으로 빈도 분석, 요인분석, 신뢰도 분석, 일원 변량 분석 등을 실시하였고, 메디컬 스킨케어 종사자의 실무경력에 따른 직무의 적합도를 살펴본 결과 피부미용 전공 교육이 메디컬 스킨케어에서 스킨케어 직무에서 적합하게 활용되고 있음을 확인할 수 있었다. 또 직무의 실제 현장 에서 빈도가 높을수록 중요도가 높았고, 실무 경력에 따라 난이도가 있음을 확인할 수 있었다. 의료 미용 산업이 성장할수록 메디컬 스킨케어 종사자들의 직무에 대한 다양한 연구들이 진행되어 전문성 있는 직무로 체계화시킬 수 있어야 할 것이다.

광촉매는 물에서 유기 염료를 분해하는 친환경적 기술이다. 산화 텅스텐은 이산화 티타늄에 비해 더 작은 밴드갭을 지니고 있어 광촉매 나노물질로서 활발히 연구되고 있다. 계층적 구조의 합성, 백금 도핑, 나노 복합물 또는 다른 반도체 와의 결합 등이 광촉매 분해 효율을 향상시키는 방법들로 연구되고 있다. 이들 방법들은 광 파장의 적색편이를 유도하여 전자 이동, 전자-정공 쌍의 형성과 재결합에 영향을 미친다. 산화 텅스텐의 형태 개질을 통해 앞서 언급한 광촉매 분해 효율을 향상시키는 방법들과 합성에 대해 분석하였으며 금속 산화물과 탄소 복합재를 결합하는 방법이 새로운 물질의 합성이 필요 없으며 가장 효율적인 방법으로 조사되었다. 이러한 광촉매 기술은 수처리 분리막기술과 모듈화하여 정수처리 목적으로 사용 될 수 있다.

Focusing on the emerging influencer market of SNS (Social Network Service), This study attempts to clarify the priority of Influencer characteristics when the customer decided to purchase products through the promotion of influencers. Since the influencer marketing differs from the Online information source marketing, this study has an academic implication in that integrated the influence of the characteristics of the Online information sources and the characteristics of SNS contents. For this purpose, through the literature research on Information sources and Influencers, the characteristics of influencers were reconstructed and priorities were derived using the AHP (Analytic Hierarchy Process) technique. The upper layer of the AHP structure was set to expertise, trustworthiness, social attractiveness, and content attractiveness, and the lower layer structured the model with 13 subfactors. The results are summarized as follows. First, in the result of combining the importance of the 1st and 2nd classes, the detailed factors of expertise and trustworthiness, ranked from the top to six, are largely influenced in purchasing decisions in influencer marketing. Second, content attractiveness is the third rank in the 1st layer. Influencer marketing shows that content is more important than social attractiveness. Besides, the 7th to 9th positions of the overall rankings accounted for visual information, storytelling, and external attractiveness, which are the details of content attractiveness, and it is confirmed that it is more effective for influencer marketing to emphasize content attractiveness than social attractiveness. Although the influencer marketing differs from the existing information marketing, this study has an academic implication in that integrated the influence of the characteristics of the source and the characteristics of the contents.

To enumerate Staphylococcus aureus in food, Baird-Parker Agar (BPA) is usually used in the conventional method, However it requires time and space for the preparation and plating, and incubation. Thus, use of the 3MTM PetrifilmTM Staph Express Count Plate (STX Petrifilm) might be appropriate to solve these challenging problems. The purpose of this study was to compare the efficiency of STX Petrifilm with BPA for enumeration of S. aureus in various foods. A mixture of S. aureus strains ATCC29213, ATCC25923, and ATCC13565 was inoculated on marinated pork chop, beef (chuck tender), dried filefish, semi-dried squid, rice cake, and Japchae (stir-fried glass noodles) at 2, 3, 5, and 7 Log CFU/g. S. aureus cell counts were enumerated by spread-plating on STX Petrifilm and BPA after 0 and 24 hours at 4oC (marinated pork chop, beef, semi-dried squid, and stir-fried glass noodles) and 25oC (dried filefish and rice cake). Recovery of STX Petrifilm for S. aureus from various food samples was compared with BPA, and the results showed that there were no significant differences between two selective media in all cases. The results indicated that STX Petrifilm had enough efficiency to recover S. aureus from various foods as well as saving time and space.

급속열분해 바이오오일은 사용 용도를 제한하는 바람직하지 않은 많은 특성을 가지고 있다. 낮은 산도, 불안정성, 수분과 산소 함량, 부식성 증가, 저장동안에 중합 및 낮은 발열량이 적용을 제한하는 주요 특징이다. 에스터 반응을 이용한 공비 수분 제거는 이 모든 특성을 개선할수 있다. 본 연구에서는 바이오오일의 특성 변화를 알아보기 위하여 0.3～1.4 mm 크기의 신갈나무 시료 500 g을 550℃에서 2초 동안 급속열분해하여 바이오오일을 제조하였다. 제조된 바이오오일을 감압(100 hPa) 조건에서 30 min 동안 비휘발성 알콜인 n-butanol 처리하였다. 제조 오일의 수분, 점도, 고위발열량, 산도, FT-IR 및 GC/MS을 분석하였다. 수분은 91.4 % 감소(from 31.5 % to below 2.7 %), 점도는 65.8 % 감소 (from 36.5 to 12.5 cP), 발열량은 96.8 % 증가(from 3,918 to 7,712 kcal/kg), 산도는 1.3 증가했다 (from 2.7 to 4.0). FT-IR 및 GC/MS 분석결과 불안정한 산성물질, 알데히드, 케톤 및 저급 알콜이 안정된 목표 물질로 변환한 것으로 나타났다. 특히 실험 수행 과정에서 급속열분해 바이오오일의 수분 함량이 상당히 감소했다. 이렇게 개선된 품질 개선된 급속열분해 바이오오일은 표준보일러와 열병합발전소 (CHP)의 연료로 이용이 가능하다.

In 1961, the Republic of Korea’s first newly-constructed government building was completed. The government building, as ROK office, was erected as a twin with the USOM office in Sejong-ro. The reason why the ROK office and the USOM office were erected as a twin building is that the two offices were part of Foreign Operation Administration’s Seoul Buildings Project in 1954. Within the project, the FOA office and the ROK office were rarely separated, and naturally, the ROK office was built according to the US standards. The planning, design, and construction phases which led by the US government were involved in the US architecture, engineering-construction companies. Because those AEC companies were familiar with the US technology and standards. In the phase of construction, Korean companies took part in the process under the supervise of Vinnell Corporation. The US expected to transfer its ‘modern’ and ‘developed’ technology through this process. The completed ROK office was widely known as the ‘modern style (hyundae-sik)’ building, which was body forth as glasses and new facilities. These factors were what the US emphasized for exporting architecture. The modifier, ‘modern style (hyundae-sik)’, given to the ROK office in the 1950s was a synonym for any new feeling that had never been seen hitherto. The newness of the ROK office, the ‘modern style (hyundae-sik)’ building, was specified as materials and facilities that indicates modern technology while in the absence of adequate knowledge.

목적 : 본 연구는 주의력결핍 과잉행동장애 아동(Attention Deficit Hyperactivity Disorder; ADHD)의 타이밍과 운동기능 및 실행기능의 상관관계를 알아보고자 하였다. 연구방법 : 연구 대상은 부산 지역에 거주하며, ADHD 진단을 받은 만 6~12세 아동 32명을 대상으로 하였다. 연구도구는 타이밍 기능 평가를 위해 상호작용식 메트로놈, 운동기능을 평가하기 위해 Bruininks-Oseretsky Test of motor proficiency, Second edition(BOT-2), 그리고 실행기능 평가를 위해 스트룹 아동 색상 단어 검사와 아동 색 선로 검사를 실시하였다. 타이밍과 운동기능 및 실행기능과의 상관관계를 알아보기 위해 상관분석을 사용해 분석하였다. 결과 : ADHD 아동의 타이밍과 운동기능과의 상관관계를 알아본 결과, 타이밍과 BOT-2 영역 중 미세한 손의 조절, 신체 협응에서 음의 상관관계가 있었다. BOT-2 하위 영역에서는 미세 운동 정확성, 양측 협응과 음의 상관관계가 있었다(p<.05). ADHD 아동의 타이밍 기능과 실행기능과의 상관관계를 알아본 결과, 타이밍과 스트룹 아동 색상 단어 검사의 단어 점수와 아동 색 선로 검사의 Children’s Color Trails Test(CCTT)-1 점수에서 음의 상관관계가 있었다(p<.05). 결론 : 본 연구의 결과를 통해 타이밍과 운동 및 실행기능의 상관관계를 확인할 수 있었다. 따라서 타이밍 평가를 통해 ADHD 아동의 운동기능과 실행기능을 예측할 수 있을 것이다.

The number of hand knitters has increased dramatically in the past few years. Recently, various hand knitted items have been seen in many fashion collections. The main purpose of this study is to analyze the design features of hand knitted items in the collections from Daniela Gregis. This brand was selected because it featured knitted items in its collections every season. An empirical analysis about form, material, color and knitting technique was done for hand knitted items from Daniela Gregis’ collections from 2012 S/S to 2018 S/S. The results can be summarized as follows: In terms of form, garments such as pullovers, cardigans, and shawls used basic components, and accessories such as bags, mufflers, hats, and decorative pieces had various shapes. In the material, there were many items that expressed unique textures by combining various materials such as a mix of fabric and yarn. With regards to color, orange, yellow, and red were mainly used as accent colors, and combinations of two or more colors were prominent in the items. In terms of knitting technique, the methods used in the collections were mostly simple and basic. Among various techniques, plain knitting, garter knitting, and single crochet methods were mainly used. While this study is limited to the characteristics of hand knitted items from a single brand, therefore cannot be generalized for all knit fashion, the study provides basic data that could facilitate the revitalization of the hand knitting industry and expand the application range of hand knitting techniques.

This study examines the site and erection of the Government Complex Seoul which was a project attempted to assemble dispersed government buildings in a certain place. The study focuses on the fact that the project is situated between the 1960s’ making of capital Seoul and Seoul urban planning, and the way how the project achieved symbolism in capital Seoul. The project, one of the 1960s’ Major Government Buildings, led both plan of capital Seoul and transforming city Seoul. The 1960s’ Major Government Building Plan had identical drive with the 1950’s Major Government Building Plan, however the 1960s’ had additional layer: Seoul urban planning. After restoration of the Capital building, Sejongro the capital street was planned to the site arranging government offices. The Government Complex Seoul was set to be a modern building on a site with historical context according to the plan. Because of the site, the Government Complex Seoul was constructed in aware of other buildings that represented a competitive high-rise atmosphere in the late 1960s, including the Capital building nearby. PAE International’s plan was completed through a series of design modification, and it boasted a vertical aspect, unlike the horizontal-looking plan that was already won after the design competition. The Government Complex Seoul tried to acquire the symbolism in the central space of the capital Seoul and high-rised city Seoul. “The new construction method” was a requirement to achieve the height.