본 연구에서는 구조물의 진동제어를 위하여 사용되는 가장 대표적인 수동형 제진장치로 알려진 동조질량 감쇠기(Tuned Mass Damper, TMD)의 동적특성을 운영 중에 추정하는 기법에 대해서 다룬다. 동적특성 추정법은 무향칼만필터에 기반하고 있으며, 구조물과 TMD의 계측 가속도를 이용한다. TMD 파라미터 중에 마찰계수를 추정 파라미터로 포함하는 경우와 그렇지 않은 경우로 구분하여 마찰계수가 TMD의 동적특성에 미치는 영향을 평가하였다. 추정된 TMD 파라미터와 TMD에 의해서 분화된 두 개의 인접모드의 동적 특성을 이용하여 제어 대상 모드의 동적특성을 추정하여 제진장치에 의한 제어성능을 평가하였다. 본 연구에서 제안된 TMD 파라미터 추정법을 실 구조물 계측응답에 적용한 결과 안정적인 파라미터 추정이 이루어지는 것을 확인할 수 있었으며 제어성능 평가가 가능함을 검증하였다.

PURPOSES : The exposed aggregate number (EAN) and mean texture depth (MTD) of exposed aggregate concrete pavement (EACP) influence the functional performance of EACP in terms of pavement noise and skid resistance. The selection of the exposure time of EACP is important because the designed EAN and MTD of EACP can be achieved when the exposure process is performed at an appropriate time. On the one hand, too early exposure may cause protrusions and unwanted removal of aggregates and mortar. On the other hand, late exposure may cause difficulty in exposure of the mortar. In this study, a method to determine the optimum exposure time for EACP is suggested using a non-destructive method. METHODS : A set of laboratory tests was performed to investigate the variation in EAN and MTD of EACP according to the elastic modulus obtained by non-destructive equipment. From the results of this investigation, the optimum exposure time using the non-destructive method and the exposure time window (ETW) method was suggested. In addition, the usefulness of ETW suggested by laboratory tests was verified from a field application. RESULTS : From the laboratory tests, it was found that the targets of the surface condition of EACP (EAN: 59 per 25 cm2, MTD: 1.39 mm) can be achieved when the concrete elastic modulus is higher than 20GPa. The proposed guideline using the non-destructive method was applied for the field construction of EACP and achieved similar results. CONCLUSIONS : It was found that the proposed guideline for determining the exposure time window based on non-destructive testing is useful.

Sodium intake has been associated with the health-related quality of life (HRQoL). This study examined the demographic factors related to HRQoL and whether there is an association between sodium intake and HRQoL in adults residing in rural areas. A total of 1,980 adults (aged ≥20 years) were selected from a cross-sectional study conducted between December 2013 and February 2014 in Gyeongju, South Korea. The sodium intake and HRQoL were measured using a validated food frequency questionnaire and the EuroQol Five-Dimension (EQ-5D) (mobility, self-care, usual activities, pain/discomfort, and anxiety/depression), respectively. The education levels (<5 years) were inversely associated with all five dimensions of HRQoL. Men had better EQ-5D scores for each of the five components examined. Adults living with spouses had better scores related to usual activities and anxiety/depression, whereas widowers had decreased scores of mobility and self-care. Unlike older adults aged 70-79 years, adults aged <60 years were more likely to have greater scores related to mobility, usual activities, and pain/discomfort. The income levels were also inversely related to the scores for self-care, usual activities, pain/discomfort, and anxiety/depression. Sodium intake was positively associated with the HRQoL related to self-care, usual activities, and pain/discomfort, but it was negatively associated with anxiety/depression. In conclusion, these findings suggest that the demographic factors and sodium intake were independently associated with HRQoL. The results highlight the need to provide tailored, targeted policies and interventions that consider personal characteristics and dietary intake to improve the overall HRQoL in adults residing in rural areas.

PURPOSES : Nitrogen oxides (NOx) are the main precursors to generate fine particulate matter, which significantly contribute to air pollution. NOx gases are transmitted into the atmosphere in large quantities, especially in areas with a high volume of traffic. Titanium dioxide (TiO2), which is a photocatalytic reaction material, is very efficient for removing NOx. The application of TiO2 to concrete road structures is a good alternative to remove NOx. Generally, TiO2 concrete is produced by mixing concrete with TiO2 . However, a significant amount of TiO2 in concrete cannot be exposed to air pollutants or UV. Therefore, an alternative method of penetrating TiO2 into horizontal concrete structures using a surface penetration agent was proposed in a previous study. This method may not only be economical but also applicable to various types of horizontal concrete structures. However, the TiO2 penetration method may not be applied to vertical structures because it has a mechanism for the penetration of TiO2-containing penetration agents via gravity and capillary forces. Therefore, this study aimed to evaluate the applicability of the pressurized TiO2 fixation method for existing vertical road structures. METHODS : For the application of vertical concrete structures — such as retaining walls, side ditches, and barriers — the applicability of a static and dynamic pressurized TiO2 fixation method was evaluated according to the experimental conditions, considering the amount of pressure and time. The penetration depth and distribution of TiO2 particles in the concrete specimen were measured using SEM/EDAX. In addition, the NOx removal efficiencies of TiO2 concrete were evaluated using the NOx analysis system. RESULTS : As a result of measuring the penetration depth and distribution of TiO2 in the concrete, it was found that the surface-predicted mass ratio increased with increasing pressure and time. In the case of the static pressurized fixation method, it was confirmed that a pressure time of at least 10 s at a pressure of 0.2 MPa and 5 s at a pressure higher than 0.3 MPa were required to achieve a NOx removal efficiency higher than 40 %. Conversely, for the dynamic pressurized fixation method applying a hitting energy of 16.95 J, NOx removal efficiencies higher than 50 % were secured in a pressure time of more than 3 s. CONCLUSIONS : The results of this study showed that the static and dynamic pressurized TiO2 fixation method was advantageous in penetrating and distributing TiO2 particles into the concrete surface to effectively remove NOx. It was confirmed that the proposed method to remove NOx was sufficiently applicable to existing vertical concrete road structures.

PURPOSES : Pavement growth (PG) is a phenomenon whereby the overall length of a concrete pavement increases. The increase in length induces an axial compressive force in the concrete pavement slab, resulting in blow-up and damage of adjacent structures, such as a bridge. PG is influenced by several interacting factors, including climatic conditions, pavement materials, joint systems, incompressible particles (IP) infiltrating the joints or cracks in the slab, and an expansion caused by reactive aggregates in the concrete. However, it is difficult to predict PG and blow-up due to various complicated factors. Therefore, in this study, the pavement growth and blow-up analysis (PGBA) package program was developed to predict the PG and blow-up potential. The PGBA can consider the pavement configuration, expansion joint (EJ) configuration, climatic conditions, and design reliability. To evaluate the effects of influencing factors — such as climatic data, EJ configuration, pavement structures and materials, and design reliability — on PG and occurrence time of blow-up, a numerical example was demonstrated and a sensitivity analysis was performed. METHODS : To predict the PG, the concrete temperature was calculated using an appropriate analytical model. The trigger temperature for pavement growth(TTPG) was predicted using a statistical equation that considers pavement age, joint spacing, and precipitation. An analytical solution for estimating the concrete slab movement was performed. Through the calculated TTPG and the amount of PG, the service life of the EJ (width of EJ) can be predicted compared to the allowable width. In addition, by using analytical and finite elements, the safe temperature(Tsafe) for preventing blow-up occurrence was calculated. The blow-up occurrence was assumed to occur when the variation between the concrete temperature and TTPG was larger than Tsafe. RESULTS :As a result of the sensitivity analysis of maximum temperature and precipitation, the temperature and precipitation increase and the EJ service life and possibility of blow-up decrease. Sensitivity analysis was performed on the thermal expansion coefficient, pavement thickness, base layer type, concrete elastic modulus, and joint rotational stiffness in the concrete pavement structure and properties. In the PGBA program, the coefficient of thermal expansion and the type of base layer significantly affect the EJ life, as do the possibility of blowup and the elastic modulus. The joint rotational stiffness and pavement thickness had little effect on the EJ life but were found to affect the possible timing of blow-up. As a result of the PGBA sensitivity analysis of the width and spacing, which are the specifications of the EJ, the life of the EJ and the possibility of blow-up increased as the joint width increased; however, the EJ life and blow-up increased as the EJ interval reached a certain value. It was found that the possibility of a blow-up occurrence decreased. The results for the PGBA program in extreme weather conditions, the life span of EJs, and the possibility of blow-up in normal climates were reduced by over 50 %. CONCLUSIONS : As a result of PGBA sensitivity analysis, it was found that the substrate type, thermal expansion coefficient, precipitation, and alkali-silica reaction had the greatest influence on pavement expansion and blow-up.

PURPOSES : NOx is a particle matter precursor that is harmful to humans. Various methods of removing NOx from the air have been developed. TiO2 and activated carbon are particularly useful materials for removing NOx, and the method is known as particulate matter precursor reduction. The removal of NOx using TiO2 requires sunlight for the photocatalytic reaction, whereas activated carbon absorbs NOx particles into its pores after contact with the atmosphere. The purpose of this study is to evaluate the NOx removal efficiency of TiO2 and activated carbon applied to concrete surfaces using the penetration method. METHODS : Surface penetration agents, such as silane-siloxane and silicate, were used. Photocatalyst TiO2 and adsorbent activated carbons were selected as the materials for NOx removal. TiO2 used in this study was formed by crystal structures of anatase and rutile, and plant-type and coal-type materials were used for the activated carbon. Each surface penetration agent was mixed with each particulate matter sealer at a concentration ratio of 8:2, and the mixtures were sprayed onto the surface. The NOx removal efficiency was evaluated using NOx removal efficiency equipment fabricated in compliance with the ISO 22197-1 standard. RESULTS : Anatase TiO2 showed a maximum NOx removal efficiency of 48% when 500 g/m² was applied. However, 500 g/m² of rutile TiO2 showed a NOx removal efficiency of up to 10%. When 700 g/m² of coal-based activated carbon and plant-based activated carbon was used, NOx removal efficiencies of up to 11% and 14%, respectively, were obtained. CONCLUSIONS : Rutile TiO2, a coal-based activated carbon, and plant-based activated carbon have lower NOx removal efficiencies than anatase TiO2. A lower amount of anatase TiO2 (500 g/m²), compared to the other spraying volumes, yielded the most significant NOx removal efficiency under optimal conditions. Therefore, it is recommended that 500 g/m² of anatase TiO2 should be sprayed onto concrete structures to improve the economic and long-term performance of these structures.

본 연구에서는 다물체 페리다이나믹 해석 코드의 MPI-OpenMP 혼합 병렬화를 수행하였다. 페리다이나믹 해석 모델은 복잡한 동적 파괴 거동 및 불연속 특성을 모사하는데 적합하지만, 비국부 영역을 통한 절점 간 상호작용을 계산하기 때문에 유한요소 모델에 비해 계산 시간이 많이 소요된다. 또한 다중적층구조물의 다물체 페리다이나믹 해석에서 추가된 비국부 접촉 모델과 가상 층간 결합 모델을 통한 여러 물체 간 상호작용으로 계산 부담이 증가한다. 더불어 고속 충돌 파괴와 같은 복잡한 동적 파괴 거동 해석을 위해 세밀한 절점 간격과 작은 시간 간격이 요구되기 때문에 코드 최적화와 병렬화를 통한 고성능 해석 코드 개발이 필수적이다. 해석 코드는 Intel Fortran MPI compiler와 OpenMP를 사용하여 개발되었으며, 한국과학기술정보원(KISTI)의 슈퍼컴퓨팅센터 누리온(Nurion)으로 실행되었다. 다물체 해석 코드를 최적화하기 위한 핵심 요소들을 분석하고, 모델 의존성 발생 서브루틴 분석 및 프로세스 통신 데이터 분별을 통해 MPI-OpenMP 혼합 병렬 처리 구조를 적용하였다. 다물체 충돌 파괴 현상 시뮬레이션을 통해 개발된 병렬 처리 코드의 성능을 확인하였다.

PURPOSES : Concrete pavement is excellent in structural performance and durability. However, its functionality – such as noise and skid resistance – is a shortcoming. Functionality such as noise reduction and skid resistance of concrete pavement is affected by the texture surface, and the texture surface is classified according to the length of the wavelength. In recent years, Fine-size exposed aggregate concrete pavement has been applied, which has excellent structural performance and durability, and secures functionalities such as noise reduction and long-term skid resistance by randomly forming texture surface. Fine-size exposed aggregate concrete pavements are constructed by removing the surface cement binder to randomly expose coarse aggregate and their functionality is mainly governed by the surface texture. However, deteriorated concrete by tire-pavement friction and deicing agent may cause abrasion and aggregate loss on the surface texture; thus reducing their functional performances. Abrasion is created by the thin cutoff of aggregate texture under repeated tire-pavement friction. In addition, aggregate loss is defined by the detachment of aggregates from cement binder. This study aims to evaluate the abrasion and aggregate loss of Fine-size exposed aggregate concrete pavement surface texture under tire-pavement friction and scaling tests. METHODS : In the study, abrasion and aggregate loss of tining and exposed aggregate concrete surface treatments were evaluated. Deterioration of each surface treatment was replicated by scaling test under ASTM C 672 test method. Afterward, abrasion test was conducted by ASTM C779 to simulate the tire-pavement friction under traffic. Consequently, abrasion and aggregate loss were measured. RESULTS : Abrasion depth of non-scaling tining, 10-mm EACP, and 8-mm EACP was 1.76, 1.12, and 1.01mm, respectively. Compared to scaling surface treatments, the difference of abrasion depth in tining texture was the largest with value of 0.4mm. For both textures of finesize exposed aggregate concrete, abrasion depth difference was about 0.1mm. Moreover, The 10-mm EACP exhibited a 2.6% of aggregate loss rate caused by tire-pavement friction before conducting concrete deterioration test. After 40-cycle scaling test, aggregate loss increased up to 12.2%. For 8-mm EACP, aggregate loss rate was 1.7% on non-scaling concrete. Further, this rate was magnified up to 7.3% for the 40-cycle scaling concrete. CONCLUSIONS : Under non-scaling or scaling tests, fine-size exposed aggregate concrete pavement showed better abrasion resistance than tining texture since tining was formed by aggregates and cement binder. Additionally, rate of aggregate loss was significant when EACP experienced the deicing agent under numerous cycles of freeze-thaw action.

PURPOSES : Pavement growth (PG) of concrete pavement has been recognized as a major concern to highway and airport engineers as well as to road users for many years. PG is caused by the pressure generation in the concrete pavement as a result of a rise of the concrete temperature and moisture. PG could result in concrete pavement blowup and damage the adjacent or the nearby structures such as bridge structures. The amount of the PG is affected by the complicated interactions of numerous factors such as climatic condition, amounts of incompressible particles (IP) infiltration into the joints, pavement structure, and materials. Trigger temperature for pavement growth (TTPG) is defined as the concrete temperature when all transverse cracks or joints within the expansion joints completely close and generating a pressure in the pavement section. It is one of the most critical parameters to evaluate the potential of PG occurring in the pavement. Unfortunately, there are no available methods or guidelines for estimating TTPG. Therefore, this study aims to provide a methodology to predict TTPG of a concrete pavement section. METHODS : In this study, a method to evaluate the TTPG and its influencing factors using the field measured data of concrete pavement expansions is proposed. The data of the concrete pavement expansions obtained from the long-term monitoring of three concrete pavement sections, which are I-70, I-70N, and Md.458, in Maryland of United Stated, were used. The AASHTO equation to estimate the joint movement in concrete pavement was used and modified for the back-calculation of the TTPG value. A series of the analytical and numerical solutions presented in the literatures were utilized to predict the friction coefficient between the concrete slab-base and to estimate the maximum concrete temperature of these three pavement sections. RESULTS : The estimated maximum concrete temperature of these three pavement sections yearly exhibited relatively constant values, which range from 40 to 45 °C. The results of the back-calculation revealed that the TTPG of the I-70 and Md.58 sections decreased with time. However, the TTPG of the I-70N section tended to be relatively constant from the first year of the pavement age. CONCLUSIONS : The estimation of the TTPG for the three concrete pavement sections showed that the values of the TTPG gradually decreased although the yearly maximum concrete pavement temperature did not change significantly.