This study measured the biochemical properties, antioxidants, free sugars, organic acids, trigonelin, chlorogenic acids, and caffeine content of coffee prepared using different extraction methods by adding dried apple powder to develop high-quality functional drinks. Espresso had the highest soluble solids content and brownness at 9.17±0.88oBrix and 1.85±0.57. Its organic acid content was higher in the sample groups than in the control group, whereas the espresso group was highest in citric acid at 2184.11±0.01 mg/mL, malic acid at 2181.35±0.03 mg/mL, fumal acid at 40.42± 0.01 mg/mL, lactic acid at 32.04±0.02 mg/mL, and formic acid at 49890 mg/mL. Additionally, it had the highest sucrose, glucose, fructose, and sorbitol contents (p<0.05). In the trigonelin content, the sample groups showed a higher content than the control group, with the order being espresso > mokapot > water drip > frenchpress > sippon > hand drip (p<0.05). In the content of chlorogenic acid and caffeine, the sample groups showed higher content than the control group, with the order of espresso > mokapot > water drip > siphon > frenchpress > hand drip (p<0.05). As a result, espresso was found to be suitable for developing coffee drinks in manufactured coffee with different extraction methods.

본 연구에서는 구조물의 진동제어를 위하여 사용되는 가장 대표적인 수동형 제진장치로 알려진 동조질량 감쇠기(Tuned Mass Damper, TMD)의 동적특성을 운영 중에 추정하는 기법에 대해서 다룬다. 동적특성 추정법은 무향칼만필터에 기반하고 있으며, 구조물과 TMD의 계측 가속도를 이용한다. TMD 파라미터 중에 마찰계수를 추정 파라미터로 포함하는 경우와 그렇지 않은 경우로 구분하여 마찰계수가 TMD의 동적특성에 미치는 영향을 평가하였다. 추정된 TMD 파라미터와 TMD에 의해서 분화된 두 개의 인접모드의 동적 특성을 이용하여 제어 대상 모드의 동적특성을 추정하여 제진장치에 의한 제어성능을 평가하였다. 본 연구에서 제안된 TMD 파라미터 추정법을 실 구조물 계측응답에 적용한 결과 안정적인 파라미터 추정이 이루어지는 것을 확인할 수 있었으며 제어성능 평가가 가능함을 검증하였다.

This study introduces a newly developed PC non-bearing wall system to prevent the damage of RC wall-type apartments that have been heavily damaged by the 2017 Pohang Earthquake. In order to evaluate the performance of the developed PC non-bearing wall system, a static cyclic test is conducted. The prototype of test specimen is from the RC wall-type apartment which has been severely damaged by the 2017 Pohang Earthquake. The specimen with the conventional non-bearing wall system showed the similar damage of RC wall type apartment suffered from the Pohang Earthquake. In case of the specimen with the developed PC non-bearing wall system, cracks and damages were not transmitted between the walls due to the seismic slit and there were almost no cracks in the non-bearing walls. Therefore, the proposed non-bearing wall system, separated from the structural walls, could prevent spreading cracks to bearing walls and make it possible to effectively control damage due to earthquake loads.

본 논문에서는 아라미드 스트립을 이용하여 영구거푸집을 제작하고 철근 콘크리트 기둥에 적용하여 성능을 평가하였다. 보강된 철근콘크리트 기둥의 구조거동을 평가하기 위하여 총 3개의 기둥을 제작하였다. 1개의 실험체는 무보강 실험체로서 비내진 상세의 기둥이며 다른 두 실험체의 경우 내진설계가 적용되거나 아라미드 섬유보강 영구거푸집으로 보강하였다. 기둥의 전형적인 성능평가를 위하여 일정한 축하중하에서 정적반복가력 실험을 수행하였다. 실험결과 무보강 실험체와 비교하여 전단 강도, 연성 및 에너지 소산능력을 증가시켰으며 반복하중으로 인한 강도 및 강성 저감에서 우수한 성능을 보였다. 따라서, 본 연구에서 제안한 아라미드 보강 영구거푸집은 기존 RC 기둥의 내진성능을 향상시킬 수 있을 것으로 판단된다.

Yangjindang house, which is located in Sang-ju province of South Korea, is one of the special Hanok structures dated back to Joseon dynasty. This study aims to examine structural safety of the Yangjindang wood frame building considering dynamic parameters such as the natural frequency and damping ratio. The numerical model of the wood frame building is implemented using Midas Gen, especially the wood joint where column and beam were connected. The behavior of the actual frame building was compared with the modeling results. In addition, structure responses such as shear force, axial force, flexural moment and deflections were calculated and compared with the allowable limits. Numerical results show that, generally, despite of some local members shear failure, Yangjindang’s structural response does not exceed the limitation according to current standards.

The paper presents the damage estimation of bridge structures in Daegu city based on the scenario-based earthquakes. Since the fragility curves for domestic bridge strucures are limited, the Hazus methodology is employed to derive the fragility curves and estimate the damage. A total of four earthuquake scenarios near Daegu city are assumed and structure damage is investigated for 81 bridge structures. The seismic fragility function and damage level of each bridge had adopted from the analytical method in HAZUS and then, the damage probability using seismic fragility function for each bridge was evaluated. It was concluded that the seismic damage to bridges was higher when the magnitude of the earthquake was large or nearer to the epicenter.

The paper presents an experimental study on shear behavior of RC beams retrofitted with Uni-Directional Narrow Fabric to improve seismic performance. Experimental parameters include the type of fiber, spacing of the fiber, and the ratio of transverse reinforcement. Also, Static loading test was performed on twelve shear-critical specimens. An experimental result were analyzed to investigate the contribution of shear strength and failure modes of the specimens retrofitted or strengthened with Uni-Directional Narrow Fabric compared to the non-retrofitted the specimen. In order to derive the shear strength model according to the spacing of the fiber, the experimental results were compared with the conventional shear strength model of RC elements retrofitted with FRP.

The paper presents an experimental evaluation of RC columns retrofitted by TRC(Textile fabric Reinforced Concrete). TRC were made using textile fabric fiber and self leveling mortar. A total of three specimens was constructed and was performed cyclic loading test. One specimen was a non-retrofitted column, while others were retrofitted with textile fabric and sheet type fiber. By comparing with non-retrofitted specimen, the maximum strength and ductility of retrofitted RC column was improved compared to non-retrofitted RC column.

This paper presents an experimetal study on RC beam strengthened with 3D Ultra-High-Mocular-Weight-Polyethylene (UHMWPE) fabric. This research program aims at developing the 3D UHMWPE textile fabic to improve the structural performance of RC beam. Specimens were constructed and experimentally investigated through static tests. Testing data were analyzed to investigate the performance of the specimens retrofitted or strengthened with UHMWPE fiber compared to the non-retrofitted RC beam responses. It was concluded that the strengthening method using 3D UHMWPE fiber can improve the performance of RC beam.

This paper experimentally investigates the seismic performance of RC columns retrofitted by Super Reinforcement with Flexibility (SRF). A total of three specimens with a scale factor of 1/2 were constructed and tested in order to assess the structural behavior of the retrofitted RC columns. One specimen was a non-seismically designed column without any retrofitting method while others were retrofitted with either one or two layers of SRF by using urethane adhesive. The static cyclic testing with a constant axial load was conducted to assess the seismic performance of the retrofitted RC columns. It is concluded that the SRF retrofitting method increases the strength and ductility of the RC columns and can also impact on the failure mode of the columns.

In this paper, a tuned mass damper is applied to improve the seismic performance of the lighting tower. The light tower has a high slenderness ratio, low lateral stiffness and top mass is large structure so this has weak for vibration characteristics. The optimized damping coefficient and stiffness were applied to the four lighting tower models analyzed. As a result, the light tower with TMD showed a tendency to reduce the displacement response significantly against the earthquake.

Many of recent field observations and researches have been shown that axial force variation due to vertical ground motion can affect the shear capacityRC column . However, the majority of shear strength models of RC columns in current design codes and predictive approaches have been developed based on experiments with constant axial loads. Thus, this paper evaluates the experimental seismic performance of RC columns subjected to varying axial loads. The axial loading patterns included constant and variable loading considering the characteristic of overturning moment and vertical ground motion. The observations of experimental results, including the effect on shear strength, and ductility are discussed compared with the case of constant axial load.

The target in the design of base isolated structures is the selection of isolation system properties so that optimal performance is achieved among seismic levels and performance metrics. To withstand very rare ground motions, isolation system are frequently designed with significant strength or damping, and as a result such devices provide reduced isolation effect for more frequent seismic events. To investigate improvements to the design of isolated structures, a lot of research program is performed. Experimental investigations are presented to characterize smart base isolation capable of progressively exhibiting different hysteretic properties at different stages of response. Shear tests are conducted along the ISO standard, including harmonic characterizations tests. These tests included various input intensities, multi-component excitation. Behavior of the new smart base isolation system is compared with that of linear isolation systems with both nonlinear viscous and bilinear hysteretic energy dissipation mechanisms.

The paper introduce the experimental program of investigation on the performance of RC beams strengthened with Uni-Directional Narrow Fabric. A total of twelve shear-critical specimens were constructed and experimentally investigated through static loading tests. Experimental parameters include the shear rebar, the type of fiber, and spacing of the fiber. Testing data were analyzed to investigate the performance of the specimens retrofitted or strengthened with Uni-Directional Narrow Fabric compared to the behavior of the non-retrofitted RC beam.

The paper presents a comparison of available shear strength models of RC columns by considering the effect of axial force. Although various shear strength models are proposed by many researchers, some of them neglect the effect of axial force. Thus, to clarify the effect of axial force on shear strength, the comparative study is conducted with a total of 54 experimental data of RC column collected from the PEER center. The shear strength of RC column is also evaluated with design code.

본 연구에서는 갈조류인 감태의 추출물과 그 분획들의 항산화 활성을 측정하였다. 모든 실험에서 감태의 50% 에탄올 추출물과 에틸아세테이트 분획, 아글리콘 분획을 사용하였다. DPPH (1,1-diphenyl-2-pic-rylhydrazyl)법을 이용한 자유 라디칼 소거 활성(FSC50)에서 에틸아세테이트 분획(FSC50 = 6.98 µg/mL)과 아글리콘 분획(7.03 µg/mL)은 비교물질인 (+)-α-tocopherol(8.98 µg/mL)과 유사한 활성을 나타냈다. 루미놀 발광법을 이용하여 Fe3+-EDTA/H2O2계에서 활성산소 소거 활성(총 항산화능, OSC50) 결과, 모든 추출물과 분획들 중에서 아글리콘 분획(OSC50 = 14.48 µg/mL)이 가장 큰 항산화능을 나타내었으나, 강력한 항산화제인 L-ascorbic acid (6.88 µg/mL)보다는 낮았다. 1O2로 유도된 사람 적혈구 세포 손상에 있어서 50% 에탄올 추출물은 5 ∼ 50 µg/mL에서 농도 의존적인 세포보호 효과를 나타냈다. 10 µg/mL에서 에틸아세테이트 분획과 아글리콘 분획의 세포보호 효과(τ50)는 각각 442.0 min 및 539.9 min으로 세포보호 활성이 크게 나타났다. 3종류의 감태 추출물 및 분획은 10 µg/mL에서, 비교물질인 지용성 항산화제 (+)-α-tocopherol (40.6 min)보다 훨씬 더 큰 세포보호 활성을 나타냈다. 이러한 결과들은 감태 추출물과 그 분획물들이 항노화 관련 화장품 분야에서 항산화제로서 이용 가능성이 있음을 시사하였다.

This paper presents the seismic assessment of the effect of vertical ground motion on the three-story RC building with different geometric configurations considering the vertical-to-horizontal peak ground acceleration (V/H) ratio increases. The effects of a suite of earthquake ground motion records on three-story RC buildings are presented and the results are compared with the case of horizontal only excitation. Interstory drift was considered as a global failure criterion, while the curvature ductility and shear capacity of structural members were monitored to assess failure on a local level. The effect of vertical ground motion on axial force and shear capacity is also investigated.