Background: The Functional Movement Screen (FMS) is widely used for movement assessment but suffers from subjective scoring that leads to inconsistent evaluations. While previous studies have focused on reliability, the validity of AI-supported assessment remains unexplored. Objectives: To evaluate the reliability and validity of an AI-based motion analysis system using MediaPipe for three FMS movements. Design: Prospective reliability and validity study with repeated measures. Methods: Thirty healthy adults (age 23.4±2.8 years) performed three FMS tests (Deep Squat, Hurdle Step, Inline Lunge) recorded on video. Three evaluators (two experienced physical therapists and one novice) assessed recordings in three phases: Phase 1 involved traditional assessment by experts only to establish criterion reference, Phase 2 had all evaluators using AI support, and Phase 3 consisted of repeated AI-supported assessment. The AI system provided real-time visual feedback of joint angles and alignment through MediaPipe skeletal tracking. Results: Criterion validity showed strong agreement between traditional expert assessment and AI-supported assessment (r=0.94, P<.05). Inter-rater reliability improved from good (ICC=0.89) to excellent (ICC=0.91) with AI support. The novice evaluator achieved immediate expert-level performance with only 0.05 points difference from experts. Intra-rater reliability was excellent for all evaluators (ICC=0.84-0.89). Conclusion: The AI-based system demonstrated strong validity and improved reliability for fundamental movement assessment. While AI support enabled novice evaluators to achieve expert-level performance immediately, it may increase sensitivity to subtle movement variations. This technology shows promise for standardizing movement screening, though current limitations restrict its application to standing movements.

In this paper, a water rescue mission system was developed for water safety management areas by utilizing unmanned mobility( drone systems) and AI-based visual recognition technology to enable automatic detection and localization of drowning persons, allowing timely response within the golden time. First, we detected suspected human subjects in daytime and nighttime videos, then estimated human skeleton-based poses to extract human features and patterns using LSTM models. After detecting the drowning person, we proposed an algorithm to obtain accurate GPS location information of the drowning person for rescue activities. In our experimental results, the accuracy of the Drown detection rate is 80.1% as F1-Score, and the average error of position estimation is about 0.29 meters.

Italian ryegrass (Lolium multiflorum Lam., IRG) is a widely cultivated winter forage crop known for its high yield and nutritional value. This study evaluated the processing characteristics and feeding performance of IRG-based pellets in Hanwoo cattle (Bos taurus coreanae) and Korean native black goats (Capra hircus). IRG was harvested at the optimal growth stage and processed into two pellet formulations: IRG ≥80% (with up to 20% soybean meal) and 100% IRG. Feeding trials were conducted under ad libitum feeding conditions. Hanwoo cattle showed higher intake of 100% IRG pellets (7.9 kg/day/head) than IRG ≥80% pellets (7.5 kg/day/head, p<0.05), with similar average daily gain (0.9 ± 0.4 kg/day/head). Conversely, black goats exhibited significantly lower intake of IRG ≥80% pellets (54.6 g/day/head) compared to 100% IRG pellets (266 g/day/head), likely due to reduced palatability associated with soybean meal inclusion. These findings suggest that IRG pellets are suitable for Hanwoo cattle, while further optimization of pellet size and formulation is required to improve acceptance in goats. Future studies should assess long-term impacts on digestion, rumen fermentation, and metabolic responses.

본 연구에서 Greenidea (Trichosiphum) nigra를 국내에서 처음으로 보고한다. 이 종의 무시성충에 대한 형태학적 정보, 기주식물, 분포지역, 한국에 분포하는 털관진딧물속 종들의 분류키를 제공한다.

목적 : 본 연구는 2022년도 국민건강영양조사(KNHANES) 데이터를 활용하여 시력 수준과 정신건강 지표(우울, 불안) 간의 연관성을 분석하고자 하였다. 방법 : 2022년도 국민건강영양조사 원시자료 중 시력검진 및 정신건강 설문(PHQ-9, GAD-7)에 모두 응답한 519명의 성인을 최종 분석 대상으로 포함하였다. 시력 상태는 정상, 경도 시력손상, 저시력으로 구분하였으며, 복 합표본 로지스틱 회귀분석을 통해 시력과 정신건강 지표 간의 연관성을 분석하였다. 결과 : 경도 시력 손상은 중등도 이상 불안 고위험군에 속할 가능성이 정상 시력군에 비해 약 9.5배 높았으며 (OR=9.54, 95% CI: 2.01–45.25, p=0.005), 저시력군의 경우 우울 위험이 정상군 대비 약 4.3배(OR = 4.27, 95% CI: 0.85–21.56) 증가하는 경향을 보였으나 통계적으로 유의하지 않았다(p=0.081). 결론 : 시력 저하는 단순한 감각 기능의 저하를 넘어 정신건강에 유의미한 영향을 미치는 요인으로 작용할 수 있으며, 특히 경도 시력 손상군은 제도적 지원의 사각지대에 놓여 있어 더 큰 심리적 부담을 겪을 가능성이 높다. 향후 공중보건 정책에서는 시력 저하 단계별 특성을 고려한 조기 선별 및 정신건강 중재가 필요하다.

This study was conducted from 2022 to 2024 at the Grassland and Forage Crops Division, National Institute of Animal Science (RDA), in Cheonan, Korea, to develop a medium-maturing variety of Italian ryegrass (Lolium multiflorum Lam.). The newly developed tetraploid cultivar, named ‘Spider’, is characterized by its green leaves, semi-erect growth habit in late autumn, and erect growth habit in mid-spring. With a heading date of May 16, ‘Spider’ is classified as a medium-maturing variety. Compared to the control cultivar ‘Kowinmaster’, ‘Spider’ has a 1.0 mm wider leaf blade, a 1.6 cm longer leaf blade, and is 5 cm taller in plant height. Its dry matter yield (10,169 kg/ha) is significantly higher than that of ‘Kowinmaster’ (p<0.05). The crude protein content of ‘Spider’ is 10.4%, which is 0.2% higher than that of the control. Additionally, ‘Spider’ has a neutral detergent fiber (NDF) content of 49.5% and an acid detergent fiber (ADF) content of 26.6%, showing a 2.2% lower NDF and a 0.2% higher ADF compared to ‘Kowinearly’.

The commercial feed additive, native rumen microbes (RC), derived from a diverse microbial community isolated from the rumen of Hanwoo steers is being explored to enhance rumen fermentation and improve ruminant feed utilization. This study evaluated the impact of native rumen microbes supplementation on methane emissions, microbial diversity, and fermentation efficiency on in vitro assessment. Treatments were as follows: CON (basal diet, without RC); T1 (basal diet + 0.1% RC); T2 (basal diet + 0.2% RC). Rumen fermentation parameters, total gas, and methane production were assessed at 12, 24, and 48 h of incubations. The in vitro gas production was carried out using the Ankom RF Gas Production System. Supplementation of RC significantly reduced the total gas production at 12, 24, and 48 hours of incubation (p < 0.05). Volatile fatty acid concentrations were increased, while acetate and propionate were decreased (p < 0.05) at 48 h by the supplementation of RC. Notably, the 0.1% inclusion level of RC significantly reduced methane production by 28.30% and 21.21% at 12 and 24 hours. Furthermore, microbial diversity analysis revealed significant shifts (p < 0.05) in bacterial composition between the control and treatment groups, while supplementation also promoted the growth of bacterial populations, such as Succiniclasticum. These findings suggest that native rumen microbes supplementation, particularly at 0.1% inclusion level, can enhance rumen microbial composition while significantly reducing methane production in vitro.

본 연구에서는 광체꽃벌속의 미기록종 Ceratina iwatai Yasumatsu, 1936을 한국에서 처음으로 보고한다. 본 종의 기재, 분포정보, 그리고 삽화를 제공한다.

Business model(BM) innovation is widely known as a differentiated strategy and strategic framework for companies to secure a sustainable competitive advantage in an uncertain environment. While prior research has studied new business models in accordance with changes in manufacturing trends such as digitalization and servitization, empirical understanding of the dynamic processes of BM innovation is still lacking. This study addresses this gap by proposing an analytical framework of the BM innovation matrix that classifies companies' BM innovation cases into four types according to the degree of BM change and the influential level of the industry/market outcome through a critical literature review on business models and dynamics. Drawing on this framework, we conduct longitudinal case studies of leading global 3D printing firms to examine the dynamic processes and external environmental factors that shape the evolution of BM innovation. Our findings reveal previously underexplored patterns of co-evolution between firms’ business models and their broader industrial and market environments. This study has the significance of constructing a framework for dynamically analyzing BM innovation based on longitudinal case studies of emerging 3D printing companies. We presented implications for companies seeking successful commercialization of emerging technologies, such as the strategic usefulness of the BM innovation framework and the importance of co-evolution with industrial structure and environmental factors in the process of change.

To explore the origins of Korean food culture, the results of archaeological excavations of pottery relics from the early Neolithic period on the Korean Peninsula were examined, and the changes in the form and usage of the potteries in the stratified layers of shell mounds were investigated. The findings revealed that pottery was made for use as cooking vessels, fermentation crocks, and storage jars. Advances in materials. shapes, and techniques reflected efforts to produce larger vessels that were more durable, water-resistant, and heat-resistant. The consequent food items developed were traced, the biochemical changes in cooking pot and fermentation crock were estimated, and the nutritional and hygienic contributions of the early pottery to the Neolithic people were evaluated. The primitive pottery culture era is considered an important starting point that determined the food culture of Koreans. It is argued that the production of traditional Korean cuisine, jjigae, and fermented foods such as kimchi, jeotgal and makgeolli began by using pottery. As a result, the food availability of the early Neolithic period greatly expanded, and the nutrition and hygiene of Neolithic people were drastically improved, leading to the beginning of sedentary life and agriculture, and the formation of ancient Northeast Asian states.