This study explores the profound impact of varying oxygen content on microstructural and mechanical properties in specimens HO and LO. The higher oxygen concentration in specimen HO is found to significantly influence alpha lath sizes, resulting in a size of 0.5-1 μm, contrasting with the 1-1.5 μm size observed in specimen LO. Pore fraction, governed by oxygen concentration, is high in specimen HO, registering a value of 0.11%, whereas specimen LO exhibits a lower pore fraction (0.02%). Varied pore types in each specimen further underscore the role of oxygen concentration in shaping microstructural morphology. Despite these microstructural variations, the average hardness remains consistent at ~370 HV. This study emphasizes the pivotal role of oxygen content in influencing microstructural features, contributing to a comprehensive understanding of the intricate interplay between elemental composition and material properties.

Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H2) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO4) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO4 had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec-1 at a current density of 10 mA cm-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.

역세척이 가능한 평막형 분리막 모듈을 분리막 생물반응기(MBR)에 침지시켜 운전 시간에 따른 흡입 압력을 측 정하였다. MLSS 8,000 mg/L 활성 슬러지 수용액에 공칭 세공크기가 0.2 μm, 유효막면적이 128 cm2인 분리막 모듈을 침지 시킨 후 투과 유속, quorum qeunching (QQ) 비드를 변화하며 흡입 압력을 확인하였다. Vacant bead (VB), BH4와 DKY-1의 실험군에서 FR과 SFCO 운전방식에 따른 효과를 비교, 분석하였다. 투과 유속 40 L/m2⋅h 이고 DKY-1 QQ 비드를 주입할 경우 흡입 압력 감소는 가장 효과적이었다. 또한 역세척에 의한 흡입 압력 감소 효과는 DKY-1 QQ 비드의 경우보다 2배 이 상 높게 나타났다.

The oxygen evolution reaction (OER) is very sluggish compared to the hydrogen evolution reaction (HER). Considering this difference is essential when designing and developing a cost-effective and facile synthesis method for a catalyst that can effectively perform OER activity. The material should possess a high surface area and more active sites. Considering these points, in this work we successfully synthesized sheets of cobalt phosphate hydrate (CP) and sulphurated cobalt phosphate hydrate (CPS) material, using simple successive ionic layered adsorption and reaction (SILAR) methods followed by sulfurization. The CP and CPS electrodes exhibited overpotentials of 279 mV with a Tafel slope of 212 mV dec1 and 381 mV with a Tafel slope of 212 mV dec1, respectively. The superior performance after sulfurization is attributed to the intrinsic activity of the deposited well-aligned nanosheet structures, which provided a substantial number of electrochemically active surface sites, speeded electron transfer, and at the same time improved the diffusion of the electrolyte.

Designing and producing a low-cost, high-current-density electrode with good electrocatalytic activity for the oxygen evolution reaction (OER) is still a major challenge for the industrial hydrogen energy economy. In this study, nanostructured Fe-doped CuCo(OH)2 was discovered to be a precedent electrocatalyst for OER with low overpotential, low Tafel slope, good durability, and high electrochemically active surface sites at reduced mass loadings. Fe-doped CuCo(OH)2 nanosheets are made using a hydrothermal synthesis process. These nanosheets are clumped together to form a highly open hierarchical structure. When used as an electrocatalyst, the Fe-doped CuCo(OH)2 nanosheets required an overpotential of 260 mV to reach a current density of 50 mA cm−2. Also, it showed a small Tafel slope of 72.9 mV dec−1, and superior stability while catalyzing the generation of O2 continuously for 20 hours. The Fe-doped CuCo(OH)2 was found to have a large number of active sites which provide hierarchical and stable transfer routes for both electrolyte ions and electrons, resulting in exceptional OER performance.

The design and fabrication of catalysts with low-cost and high electrocatalytic activity for the oxygen evolution reaction (OER) have remained challenging because of the sluggish kinetics of this reaction. The key to the pursuit of efficient electrocatalysts is to design them with high surface area and more active sites. In this work, we have successfully synthesized a highly stable and active NiCo2S4 nanowire array on a Ni-foam substrate (NiCo2S4 NW/NF) via a two-step hydrothermal synthesis approach. This NiCo2S4 NW/NF exhibits overpotential as low as 275 mV, delivering a current density of 20 mA cm-2 (versus reversible hydrogen electrode) with a low Tafel slope of 89 mV dec-1 and superior long-term stability for 20 h in 1M KOH electrolyte. The outstanding performance is ascribed to the inherent activity of the binder-free deposited, vertically aligned nanowire structure, which provides a large number of electrochemically active surface sites, accelerating electron transfer, and simultaneously enhancing the diffusion of electrolyte.

Brucellosis is an important bacterial zoonotic infection worldwide responsible for economic losses in livestock industries which represents a considerable and increasing public health burden. The disease is caused by Brucella which possess the ability to invade and replicate within phagocytes and may result to chronic infection, leading to difficulty in medical therapy of the disease. The treatment for brucellosis employs conventional principles that have been applied for a long time and a combination of antibiotics is currently used due to low efficacy of monotherapies. However, vital effects with respect to health and safety are neglected. Nevertheless, the preventive methods and treatments for brucellosis using traditional medicine have not yet been thoroughly studied, hence, alternative therapies such as the use of natural plant extracts as traditional medicine that are safe, efficient and economical should be explored in order to identify candidates that eliminate complications due to brucellosis. Coptis chinensis Franch (Huanglian) is a traditional Chinese medicinal herb and its extract has been known to possess strong antibacterial activity. In this study, the antibacterial effects of C. chinensis Franch extracts, and the major components of the herb namely berberine and palmatine, were investigated on B. abortus. The C. chinensis Franch ethanol extracts (CCFE) showed bactericidal effects at 1,000 μg/ml concentration and berberine at 100 μg/ml concentration. However, C. chinensis Franch and its components did not affect invasion and intracellular growth of B. abortus in RAW 264.7 cells. In conclusion, C. chinensis Franch ethanol extracts, water extract and its major components such as berberine and palmatine would be a beneficial antimicrobial agent without affecting phagocytic pathway within macrophages, and further study for the precise mechanisms of antibacterial effect would be necessary.