Porous metallic glass compact (PMGC) are developed by electro-discharge sintering (EDS) process of gas atomized Zr41.2Ti13.8Cu12.5Ni10Be22.5 metallic glass powder under of 0.2 kJ generated by a 450 μF capacitor being charged to 0.94 kV. Functional iron-oxides are formed and growth on the surface of PMGCs via hydrothermal synthesis. It is carried out at 150oC for 48hr with distilled water of 100 mL containing Fe ions of 0.18 g/L. Consequently, two types of iron oxides with different morphology which are disc-shaped Fe2O3 and needle-shaped Fe3O4 are successfully formed on the surface of the PMGCs. This finding suggests that PMGC witih hydrothermal technique can be attractive for the practical technology as a new area of structural and functional materials. And they provide a promising road map for using the metallic glasses as a potential functional application.

We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the ‘background’ task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using ‘background’ task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

The reactive oxygen species (ROS) generated during the somatic cell transfer nuclear (SCNT) procedures may cause the mitochondrial dysfunction and DNA damage, which may result in restricts the reprogramming of SCNT embryos and play a key direct role in apoptosis. The present study was conducted to investigate the effect of antioxidant treatment during the SCNT procedures on the inhibition of mitochondria and DNA damages in bovine SCNT embryos. The reconstituted oocytes were treated with antioxidants of 25 μM β-mercaptoethanol (β-ME) or 50 μM vitamin C (Vit. C) during the SCNT procedures. In vitro fertilization (IVF) was performed for controls. Mitochondrial morphology and membrane potential (ΔΨ) were evaluated by staining the embryos with MitoTracker Red or JC-1. Apoptosis was analyzed by Caspase-3 activity assay and TUNEL assay, and DNA fragmentation was measured by comet assay at the zygote stage. Mitochondrial morphology of non-treated SCNT embryos was diffused within cytoplasm without forming clumps, while the IVF embryos and antioxidant treated SCNT embryos were formed clumps. The ΔΨ of β-ME (1.3±0.1, red/green) and Vit. C-treated (1.4±0.2, red/green) SCNT embryos were significantly higher (p<0.05) than that of non-treated SCNT embryos (0.9±0.1, red/ green), which similar to that of IVF embryos (1.3±0.1, red/green). Caspase-3 activity was not difference among the groups. TUNEL assay also revealed that little apoptosis was occurred in SCNT embryos as well as IVF embryos regardless of antioxidant treatment. Comet tail lengths of β-ME and Vit. C-treated SCNT embryos (337.8±23.5 μm and 318.7 ±27.0 μm, respectively) were shorter than that of non-treated SCNT embryos (397.4± 21.4 μm) and similar to IVF embryos (323.3±10.6 μm). These results suggest that antioxidant treatment during SCNT procedures can inhibit the mitochondrial and DNA damages of bovine SCNT embryos.

The green peach aphid(Myzus persicae) and sweet-potato whitefly(Bemisia tabaci) biotype Q are serious pests in hot pepper and cucumber. To optimize the formulation type of Clothianidin 1.8% granule, coated and extruded granule formulation types were tested against green peach aphid in hot pepper and sweetpotato whitefly in cucumber. Clothianidin 1.8% granules were incorporated in soil before transplant of hot pepper and cucumber. At recommend dose(540g ai/ha), the efficacy of Clothianidin 1.8% coated and extruded granules were 83.3% and 94.4% and continued until 50 days and 70 days against green peach aphid, respectively. Against sweet-potato whitefly, the efficacy of Clothianidin 1.8% coated and extruded granules were 65.7% and 96.3% at 32 days in cucumber, respectively. Clothianidin 1.8% extruded granule was safe on crops (hot pepper, cucumber, melon, cabbage etc.) at 540g ai/ha (recommend dose) and 1080g ai/ha. The results suggested that Clothianidin 1.8% extruded granule is promising as a best insecticide against green peach aphid and sweet-potato whitefly, because of the high efficacy and low phytotoxicity.

In this research, the welding experiment was carried out with both the steel materials (SS400+SS400, SUS304+SUS304) and the different steel materials (SS400+ SUS304), where SS400 is a general structural rolled steel material and SUS304 is a cold strip stainless steel sheet. The average of yield point of a SS400 experimental piece was the most highest point with 2015.54 N/m2. Although welding defects were not found with the naked eye, it was sure that there were some wilding defects because there were no stress against load through experiments. The rate of yield point of experimental piece A, experimental piece B and experimental piece C was respectively 1.7mm, 1.3mm and 2.6mm. The rate of breakdown was respectively 39.77mm, 17.97mm and 2.6mm. So considering price and efficiency with use condition is very important. SS400 and SUS304 will be profited from considering price and mechanical property with use condition.