Modern society seeks coexistence across boundaries, inspiring fashion studies that transcend gender norms to promote equality and harmony. The current study aimed to (a) analyze and classify the design characteristics of men’s genderless fashion (Study 1) and (b) investigate the perceptions, attitudes, and purchase intentions of millennial and Gen Z male consumers regarding genderless fashion (Study 2). For the first study, we selected 192 photographs highlighting genderless features from the men’s clothing collections of 2020 F/W and 2021 S/S in Paris, Milan, London, and New York. A group of fashion experts conducted the classification, with an inter-coder reliability of 92.1%. Genderless fashion was classified into four design properties: fusion, mixing male and female characteristics; juxtaposition, showing coexistence without mixing; transition, emphasizing opposite characteristics; and neutrality, showing neither male nor female features. For Study 2, an online survey was conducted with men in their 20s and 30s (N=74, MeanAge=31.04). The participants reviewed 12 representative photographs that were obtained from Study 1, evaluating recognition, attitudes, and purchase intentions. The results showed that the participants perceived transition as the most feminine, while they judged juxtaposition, fusion, and neutrality as more neutral. The stronger the feminine elements in the materials, colors, silhouettes, fit, and decorative details were, the lower the attitudes and purchase intentions became. This research is significant vis-à-vis identifying the design characteristics of men’s genderless fashion and providing design directions that may encourage actual purchases among millennial and Gen Z male consumers.

목 적 : 가입한 (±)구면렌즈 굴절력에 대응하는 조절력의 변화를 비교하여 렌즈의 적응효과를 알아보았다. 방 법 : 평균연령 21.76±1.76세의 51명(남자 26명, 여자 25명)을 대상으로 하였다. 대상자들의 완전교정 된 눈 앞에 S+1.00 D, S+2.00 D, S+3.00 D, S-1.00 D, S-2.00 D, S-3.00 D를 순서대로 가입하여, 가입 직 후, 15분 후, 그리고 30분 후에 각 단안조절력을 측정하였다. 측정값들은 완전교정 상태의 조절력과 비교 하였고, 렌즈 가입 전·후 측정된 단안조절력의 변화값은 가입한 굴절력 값에 대한 상대 비율로 계산하였다. 결 과 : S+1.00 D, S+2.00 D, S+3.00 D 가입 후 조절력은 완전교정 조절력보다 모두 유의하게 (p<0.001) 증가되었지만, 가입된 렌즈굴절력의 약 55~68% 수준이었다. S-1.00 D, S-2.00 D, S-3.00 D 가입 후 조절력은 완전교정 조절력보다 모두 유의하게(p<0.001) 감소되었고, 가입된 굴절력의 약 72~105% 수준이었다. 결 론 : 조절변화를 목적으로 구면렌즈를 처방할 때, 임상전문가들은 렌즈적응으로 인해 더해준 구면굴절 력 값보다 조절변화량이 대부분 감소될 것이라는 점을 고려해야 한다.

Despite the importance of behavioral ecotoxicological tests, few researches have been conducted to assess the quality of freshwater using behavior of test species, in part due to lack of standardized test method for quantifying the response. In this study, we developed a new test methods using non-biting midge larva’s burrowing behavior to assess field water quality and a new index, AUC (area under curve), to compare burrowing behavior quantitatively. Four kinds of field samples (residential, natural, agricultural and industrial areas) were tested using the method to validate our methodology and index. There were not significant differences in 96 h mortality and heavy metal concentration between samples, but AUC from the industry sample was significantly decreased.

In this study, we modeled a ship or marine structure into a rectangular resistance body and tried to examine surrounding flow characteristics and pressure distributions behind the resistance body experimentally and investigated pressure characteristics by a 3-dimension numerical simulation. As a result, the reattachment point of the mainstream separated from the upper part and proceeding to the rear part was about x/H=6, but by the influence of the negative pressure area formed behind the resistance body and interference of the flow flowed in winding from left and right, the reattachment point of some flows was formed near x/H=1.33. The perpendicular velocity component behind x/H=0 varies in size with the recycle flow shapes formed from the influence of the resistance body, but generally it shows a negative distribution and there is a decreasing pattern as it goes to the down part. We verified the result of the calculation by comparing the velocity distribution of 3-dimension numerical simulation using a commercial software and the PIV(particle image velocimetry) measurements. In the numerical simulation results, the static pressure characteristic behind the resistance body was proportional to the inflow velocity, and the dynamic pressure shows a similar pattern with constant-velocity from the experiment.

The damaged spent fuel rods must be stabilized by encapsulation or dry re-fabrication technologies before geological disposal. For applying the dry re-fabrication technology, we manufactured a vertical type furnace to perform the fuel material recovery from damaged fuel rods by oxidative decladding technology. As driving forces to accelerate oxidative decladding rate, magnetic vibration and pulse hammering generated by a pneumatic cylinder were used in this study. The oxidative decladding efficiency and recovery rate of fuel oxide powder with rod-cut length, oxidation temperature and time, oxygen concentration, and gas mixtures were investigated using simfuel rod-cuts in a vertical furnace for fuel material recovery and powder quality improvement. The oxidative decladding was performed for 2.5-10 h as following operation parameters: simfuel rod-cut length of 50-200 mm, oxidative temperature from 450 to 580°C, oxygen concentration of 49.5 or 75.6%, and gas mixtures in O2/Ar or O2/N2. In magnetic vibration, oxidative decladding was progressed only at bottom portion of fuel rodcut. Whereas, oxidative decladding in pulse hammering was occurred at both top and bottom portions of fuel-rod. In pulse hammering method, the oxidative decladding conditions to declad rod-cuts of 50- 200 mm in length were established to achieve both decladding efficiency of ~100% and fuel material recovery rate of > 99%. These conditions were as follows: oxidation temperature and time at 500°C and 2.5-10 h, oxygen concentration at 75.6% under O2/N2 gas mixtures. As operation conditions for a pneumatic cylinder, stroking, actuating, and waiting times were 0.5, 3, and 12 s.

Ag-containing aluminosilicate sorbents capable of capturing iodine were prepared by sol-gelation from Na, Al, and Si alkoxides using co-solvent exchange, Ag/Na ion exchange, solvent exchange, and ambient-pressure drying. The Na+AlSi-OH gel was prepared using sodium methoxide (NaOMe): aluminum tri-sec-butoxide (Al(OsBu)3): tetraethyl orthosilicate (TEOS) molar ratios of 1.05:1:1, 1.3:1.1:1, 1.5:1.3:1. The solvent effect on textural properties such as Brunauer-Emmett-Teller (BET) surface areas and pore size distributions and Ag0 particle sizes was investigated using water with high surface tension, isopropanol and n-heptane with low surface tension. The BET surface area, average pore size, and cumulative pore volume for sorbents strongly increased with decreasing surface tension of solvents and increasing Al/Si atomic ratios. In addition, Ag0 particle sizes increased with decreasing surface tension of solvents.

The damaged spent fuel rods must be stabilized by encapsulation or dry re-fabrication technologies before geological disposal. For applying the dry re-fabrication technology, we manufactured a vertical type furnace to perform both fuel material recovery from damaged fuel rods by oxidative decladding and sinterability improvement of fuel powder by repetition of oxidative and reaction treatment. A horizontal type furnace provides only a diffusion-controlled reaction resulting in longer reaction time and decreasing amount of powder for oxidation and reduction, whereas a vertical type furnace with a submerged gas distributor gives rapid reaction due to flowing gas-solid contact by fluidization. For observation of fluidization behaviors of uranium oxides at room temperature, fluidized column was prepared with transparent cylindrical tube, pressure transmitter and gas flow meter. Number of size of orifice holes was determined by equations in Fluidization Engineering [D.Kunii, O. Levenspiel]. Before uranium oxide test, as surrogates, WO2 (10.8 g/cm3) and Ta2O5 (8.2 g/cm3) powder similar to density of UO2 (10.96 g/cm3) and U3O8 (8.3 g/cm3), respectively were used to achieve fluidization operation conditions in the region from minimum to expanded fluidization. Fluidization behaviors and pressure drop of powder bed was observed according to operation parameters such as gas velocity, number and size of orifice holes, and powder amount.

Background : In recent, a nationwide decrease in ginseng cultivation area and production is observed, and as the sales of ginseng decreases due to the economic downturn, the ginseng industry in Korea is going through more and more difficulties. However, sales of young ginseng, which are ready for the market after a short-term cultivation - 25 to 45 days - of 1 year old ginseng seedlings or 2 - 3 year old young ginseng in greenhouses and plant factories without using any chemical fertilizers, in large grocery chains and online shops is increasing. However, proper studies on cultivation of young ginseng in greenhouses are yet to be conducted, and thus, experiencing several issues including the cost burden of bed soil and disease occurred from reuse of the soil. Therefore, this study is to provide solutions for farmers cultivating young ginseng by determining the optimal type and amount of bed soil for box culture. Methods and Results : To determine the optimal type of bed soil for cultivation of young ginseng, six types of bed soil were produced by blending bed soil specialized for ginseng, granite residual soil and leaf mold in different ratios. To determine the optimal amount of bed soil for box culture of young ginseng, 1 year old ginseng seedlings are planted in three boxes - each in size of 52 ㎝ × 36.5 ㎝ × 9 ㎝ (W × L × H) filled with soils of 6 ℓ, 7 ℓ and 8 ℓ for an experimentation. Growth and development of 45-day old young ginseng showed satisfactory progress in the following order: 100% commercially available bed soil > 80% commercially available bed soil + 20% granite residual soil > 60% commercially available bed soil + 20% granite residual soil + 20% leaf mold, while the gross weight of below-aerial parts showed the same result. Conclusion : The optimum type of bed soil for greenhouse cultivation of young ginseng is the commercially available bed soil specialized for ginseng cultivation. However, the young ginseng showed relatively satisfactory growth and development in mixed bed soil - 60% commercially available bed soil + 20% granite residual soil + 20% leaf mold - and the growth and development of young ginseng were most satisfactory when the box (52 ㎝ × 36.5 ㎝ × 9 ㎝, W × L × H) was filled with 8 ℓ bed soil.

Background : With the recent increase in the area of ginseng cultivation in greenhouses, demand for studies of proper cropping patterns in direct seedling of ginseng and varieties of cultivation are increasing, and the needs for clean production of quality ginseng in greenhouses are emerging in connection with the consumer demand for pesticide-free ginseng and the supply and demand of ginseng seedling for cultivation of young ginseng. Therefore, this study is to provide baseline data in improving of quality of ginseng cultivated in greenhouses by examining the contents of ginsenoside in ginseng cultivated in different cropping patterns and different varieties. Methods and Results : As a result of examining the contents of ginsenoside in 3-year old, direct seedling ginseng cultivated in greenhouses in different depths – 10 ㎝, 20 ㎝ and 30 ㎝ - and width – 90 ㎝, 100 ㎝, 110 ㎝ and 120 ㎝ - of furrows, the contents of ginsenoside showed little differences by the depths of furrow in the furrow width of 90 ㎝ but, the highest content of ginsenoside Rb1 was observed in the furrow width of 120 ㎝ and depth of 20 ㎝, while the ginsenoside contents were high in the furrow depth of 20 ㎝ and width of 100 ㎝ and 120 ㎝. The contents of ginsenoside in different varieties of direct seedling cultivation in greenhouses were greater in the following order: Geumgin > Geumsun > Chunpoong, while the contents of ginsenoside Rb1 were observed to be superior in Sunhyang, Gopoong and Geumseon and the contents of ginsenoside Rb2 were greater in the order of Geumgin > Guemsun >　Cheonpoong. Conclusion : Based on the results, the contents of ginsenoside in different cropping patterns of direct seedling cultivation in greenhouses were higher in lower depths of furrow - 10 ㎝ and 20 ㎝ - at furrow widths wider than 100 ㎝. The contents of ginsenoside in different varieties of direct seedling cultivation in greenhouses were higher in varieties of Geumjin, Geumsun and Chunpoong.

Background : New ginseng variety “Geumwon” is appropriate for the cultivation in Chungnam. As an effort to develop new ginseng variety for regional specialization, it was collected from the Geumsan ginseng fields, selected and fixed and then was registered as new ginseng variety in 2015 through the verification of production capacity, farm demonstration and regional adaptation test. It is excellent in underground growth, disease-resistance and yield-ability compared to candidate varieties. Methods and Results : Regional adaptation tests were conducted for new ginseng variety “Geumwon” in 3 regions(i.e. Geumsan, Gochang and Icheon). The results suggested that the leaf length and width of 2-year old ginseng was 7.9cm and 4.2cm in 3 regions on an average basis. Anthrax incidence rate was about 2.5%, which was smaller than that of candidate variety(3.6%), and the underground root weight was 5.6g, which was 34% higher than that of candidate varieties. The leaf length and width of 3-year old ginseng was 9.4cm and 4.5cm, and anthrax incidence rate and leaf soot incidence rate was 0.8% and 1.2% respectively, which was lower than that of candidate varieties. The the root weight, root diameter and hull length of “Geomwon” were superior to that of candidate varieties by about 24%, 6% and 9% respectively. In addition, red discoloration and root rot incidence rate were also lower than that of candidate varieties. The growth of 4-year old ginseng was also superior to that of candidate varieties in the order of Geumsan, Ichoen and Gochang, and the anthrax and leaf soot incidence rate was also lower than that of candidate varieties(about 2.2.% and 2.3 %, respectively). Conclusion : The results of this study suggested new ginseng variety “Geumwon” is easy to cultivate in Chungnam because of its superior underground growth and excellent quality, and it was also evaluated to be an excellent variety that would contribute to the specialization of the ginseng cultivated in Geumsan.