In this study, we prepared thin composite membranes in which a support layer and a selective layer are covalently bonded in a simple method. The graft polymerization was carried out using UV/Ozone on a commercial Poly(sulfone) ultrafiltration membrane with Poly((ethylene glycol) methyl ether methacrylate) (PEGMA) possessing CO2 affinity. As a result, nano-pores on the surface membrane were covered with PEGMA. The covalent bonding of the composite membranes has the advantage of improving stability and weatherability. In addition, due to the thin selective layer formed by the graft polymerization, highly gas permeation characteristics are exhibited, and efficient process performance can be expected. The final composite membranes were investigated in terms of their chemical structures and elements, and gas permeation properties.

In this study, we prepared thin composite membranes in which a support layer and a selective layer are covalently bonded in a simple method. The graft polymerization was carried out using UV/Ozone on a commercial Poly(sulfone) (PSf) ultrafiltration membrane with Poly((ethylene glycol) methyl ether methacrylate) (PEGMA) possessing CO2affinity. As a result, nano-pores on the surface membrane were covered with PEGMA. The covalent bonding of the composite membranes has the advantage of improving stability. In addition, due to the thin selective layer formed by the graft polymerization, highly gas permeation characteristics are exhibited, and efficient process performance can be expected. The final composite membranes were investigated in terms of their chemical structures and elements, morphology, and gas permeation properties.

해충저항성 Bacillus thuringiensis (Bt) 벼의 비표적곤충인 벼물바구미(Lissorhoptrus oryzophilus)에 대한 성충 전용살충제 Clothianidin 액상수화제의 살충제 감수성 시험을 실시한 결과, 72시간-LC50은 0.245 ml/L(95% 신뢰한계는 0.195~0.307 ml/L)이었으며, Bt벼의 모본으로 대조로 사용한 낙동벼의 72시간-LC50은 0.257 ml/L(95% 신뢰한계는 0.199~0.331 ml/L)이었다. 72시간-LC50은 낙동벼에서 다소 높았지만, 해충저항성 Bt벼 72시간-LC50이 낙동벼의 95% 신뢰한계 내에 포함되어, 두 품종의 LC50값에 유의성이 없는 것으로 판단된다.

해충저항성 Bt벼와 낙동벼의 미꾸리(Misgurnus anguillicaudatus) 와 잉어(Cyprinus carpio)에 대한 급성독성시험을 실시한 결과 48시간 및 96시간-LC50은 1,000mg/L 이상으로 나타났다. 48시간 및 96시간 무영향농도(NOEC)는 1,000mg/L이었다. 급성독성 시험기간 중 해충저항성 Bt벼와 낙동벼간의 pH, DO, 수온, 체중 및 전장에 대한 유의적인 결과는 나타나지 않았다.

Maintaining superior productivity and quality in LCD requires enhancing competitiveness of partners or suppliers, such as PBA, BLU, or Mold Frame. BLU is one of the most important parts in LCD, however manufacturing environment is tedious and labor intensive. In this paper, we propose simulation modeling for BLU production process. We also investigate optimal process in terms of line balancing and conveyor characteristics.

Recently, in order to stay at predominance in the global infinity competition, most of companies have been reducing the cost in many fields of industry. First of all, the reduction of the logistics cost have been recognized greatly as the company value ri

Maize breeding is mainly divided by two steps; line development and hybrid selection. Line development is very important procedure to make good hybrids and this line development in Korea is fully depend upon conventional methods like pedigree selection, back-cross, etc. For development of pure line, we have to do self-pollination for at least seven cycles. This line development system is tedious, labor-intensive, and time-consuming procedure. Doubled Haploid technology for maize is a new system to develop inbred lines within short period and many maize research institutes in foreign advanced countries have been actively using this technology. Using Doubled Haploid technology, we can greatly reduce the period of line development and strengthen maize research ability in Korea. Key requisite for Doubled Haploid breeding is possession of inducer lines which can produce haploid when source population is crossed with them. Maize Research Institute in Gangwon Province secures the right of using inducer lines and is trying to introduce Doubled Haploid breeding in Korea. Doubled Haploid breeding system is as follows; crossing between population and inducer, separation haploid seeds from F1 seeds, chromosome doubling, doubled plant management, self-pollination, seed multiplication, and assessment. We expect our breeding capacity will be progressed by introduction of Doubled Haploid technology. When this technology comes to combine with marker assisted selection, we can increase competitiveness against global institutes.

An efficient transformation method for soybean [Glycine max (L.) Merr.] using meristematic tissues of germinating seeds has been established. The embryonic axes were excised from germinating seeds of Korean soybean cultivar, Iksannamulkong and 0.5-2 cm long segment containing meristematic tissues were prepared by cutting hypocotyl region. The explants were inoculated with Agrobacterium tumefaciens strain LBA4404 harboring a binary vector with the bar gene as a selectable marker gene and a β-glucuronidase (GUSINT) reporter gene, and then co-cultured for 7 days on co-cultivation medium (CCM). The meristematic tissues were cultured on shoot induction medium (SIMP6) supplemented with 0.4 mg/l N6-benzylaminopurine (BAP) and 0.1 mg/l indolebutyric acid (IBA) in the presence of 6 mg/l L-phosphinotricin (PPT) for 2 weeks and the surviving explants were transferred to shoot elongation medium (SEMP6). Transformation was confirmed by Southern blot analysis and the transformation efficiencies ranged from 1.48 to 2.07%. The new modified transformation method was successfully implemented for obtaining several transgenic lines with SMV-CP gene. It is expected that this method could efficiently be used for the transformation of recalcitrant soybean cultivars.