The subgenus Tricoma Cobb, 1894 comprises free-living marine nematodes encompassing a total of 83 validated taxa. Within this diversity, twenty-one taxa thrive in the deep sea, while twenty-three are found in coral reefs, flat areas, or green algae. Additionally, eleven taxa inhabit the sublittoral zone at depths exceeding 10 meters, and the remaining taxa are situated on beaches, coasts, or in habitats lacking detailed information. In the course of a survey focused on the East Sea free-living marine nematodes, we identified four new and two previously unrecorded species belonging to the subgenus Tricoma. Specifically, two new species, Tricoma (Tricoma) breviseta sp. nov. and T. (T.) donghaensis sp. nov., were discovered in mud-sandy sediment in deepsea environments below 2000 meters within the Ulleung Basin and Hupo Bank. Two previously unrecorded species [T. (T.) paralucida Decraemer, 1987 and T. (T.) similis Cobb, 1912] and the two newly found species [T. (T.) longicauda sp. nov. and T. (T.) ulleungensis sp. nov.] were obtained from subtidal coarse sand at a depth of 20 meters during a survey of the waters surrounding Ulleungdo Island. The distribution and information on validated taxa within the subgenus Tricoma were systematically collected, reviewed, and cataloged. Detailed morphological features and illustrations of Tricoma species from Korea were provided through the use of differential interference contrast microscopy.

One of released radioactive gases from a spent fuel is cesium (137Cs) as semi-volatile fission products and reticulated ceramic foam could be used for capturing the gaseous cesium. It has threedimensional open-pore structures and consumes cesium above 600°C to form cesium species including Cs-nepheline (CsAlSiO4) and pollucite (CsAlSi2O6) phases. Kaolinite-based foam filter is a favorable ceramic filter because they exhibit superior capture characteristics compared to other aluminosilicate minerals and other shape filters. However, for usage in special conditions, structural limitations such broken struts must be improved. Here, recoating by using centrifugation, followed by a pre-sintering cycle was conducted for covering the cracks and voids, resulting from the burnout of the polyurethane sponge as a sacricial template. The slurry including additives was chosen by considering viscous behavior of slurries for the centrifugation. The microstructure and strength was improved by the recoating.

Reticulated foams have a continuous skeleton network consisting of aluminosilicates and are used for capturing gaseous cesium released from spent nuclear fuel at high temperature. It has high stability to high temperature and good capturing performance. Homogeneous cell distribution and modified surface structures are indispensable conditions for stable operation and handling. In particular, triangularly shaped holes inside the struts were generated during the pyrolysis of polyurethane sponge as a sacricial template, which lead to limite the strength of the reticulated foam as well as cracks. However, several attempts have been focused on the increasing the strut thickness. Here, we have prepared ceramic foams by the polyurethane sponge replication method with roller squeezing. Ceramic slurry including additives was determined with consideration of its viscous behavior. After pre-sintering, infiltration under vacuum was conducted. Metakaolin slurry was filled partially into the triangular void. As a result, the compression strength was improved by structure modification without composition change.

This study examined the heat balance in the electrolytic reducer during oxide reduction of pyroprocessing. The adoption of carbon anodes instead of conventional platinum anodes in the oxide reduction process has made it possible to apply high currents, and it has been observed that the temperature of the molten salt of in the reactor rises rapidly when applying high currents, so it is important to maintain an optimal operational temperature range. In this study, salt resistant heat, reaction heat, and decay heat were identified as factors affecting heat balance during the operation of oxide reduction process. Equations describing the relationships among these factors were established. Then using this, a correlation was developed to understand the relationship between applied current and the molten salt temperature in the reactor observed in the actual operation of the carbon anode electrolytic reducer of KAERI. Furthermore, this study proposed strategies to mitigate excessive temperature elevation during oxide reduction operation. A comparative assessment of these approaches was conducted. Considering KAERI electrolytic reducer operation environment, among the considered cooling strategies, the cooling effectiveness was calculated to be highest in the following order: heat transfer to extra salt, convection, conduction, argon gas bubbling.

본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.

금번 연구를 통해 외래산림해충 확산 분석 플랫폼 K-SDM (K-SDM)의 해충 분포 기능이 개발되었다. 해충 분포를 보여주는 기능은 2가지로 구현되며, 조사 자료를 바탕으로 현재 국내의 해충 분포를 나타내는 “외래산림 해충분포”기능과 데이터를 분석하여 예측되는 미래의 해충 분포를 제공하는 “외래산림해충예측”기능이 있다. “외래산림해충분포”는 조사자에 의해 현장에서 구축된 DB 현황을 지도상에 수치로 나타내며, 입력 기간, 해충 종 별로 구분이 가능하여 원하는 해충종의 분포를 선택하여 볼 수 있다. 지도 좌측에는 각 도별로 조사된 해충 개체수의 통계를 도표로 제공하여 수치상으로도 해충 분포를 파악할 수 있다. “외래산림해충예측”은 DB를 분석 하고 미래 기후 시나리오를 적용하여 도출한 미래의 해충 예측 분포도를 사용자에게 제공되며, 미리보기 이미지 와 함께 원본자료가 첨부되어 좀 더 자세한 정보를 열람할 수 있다. 본 플랫폼의 해충 분포 기능은 최근 기후변화 등으로 외래산림해충의 발생이 증가하는 추세에 맞춰 이들의 현재 분포와 미래의 분포양상을 조기 파악하여 이를 통한 추후 조기 방제 및 대응책 마련 등에 크게 기여할 것으로 기대된다.

In the era of the 4th Industrial Revolution, Logistic 4.0 using data-based technologies such as IoT, Bigdata, and AI is a keystone to logistics intelligence. In particular, the AI technology such as prognostics and health management for the maintenance of logistics facilities is being in the spotlight. In order to ensure the reliability of the facilities, Time-Based Maintenance (TBM) can be performed in every certain period of time, but this causes excessive maintenance costs and has limitations in preventing sudden failures and accidents. On the other hand, the predictive maintenance using AI fault diagnosis model can do not only overcome the limitation of TBM by automatically detecting abnormalities in logistics facilities, but also offer more advantages by predicting future failures and allowing proactive measures to ensure stable and reliable system management. In order to train and predict with AI machine learning model, data needs to be collected, processed, and analyzed. In this study, we have develop a system that utilizes an AI detection model that can detect abnormalities of logistics rotational equipment and diagnose their fault types. In the discussion, we will explain the entire experimental processes : experimental design, data collection procedure, signal processing methods, feature analysis methods, and the model development.

Recently, the development of computer vision with deep learning has made object detection using images applicable to diverse fields, such as medical care, manufacturing, and transportation. The manufacturing industry is saving time and money by applying computer vision technology to detect defects or issues that may occur during the manufacturing and inspection process. Annotations of collected images and their location information are required for computer vision technology. However, manually labeling large amounts of images is time-consuming, expensive, and can vary among workers, which may affect annotation quality and cause inaccurate performance. This paper proposes a process that can automatically collect annotations and location information for images using eXplainable AI, without manual annotation. If applied to the manufacturing industry, this process is thought to save the time and cost required for image annotation collection and collect relatively high-quality annotation information.

Three free-living marine nematodes (Desmoscolex (Desmoscolex) max Timm, 1970, Daptonema longiapophysis Huang and Zhang, 2010, and Pseudosteineria sinica Huang and Li, 2010) were newly recorded in Korea. Desmoscolex (D.) max was found from subtidal coarse sediment around Wangdolcho in the East Sea. It was characterized by the presence of untypical setae arrangement, obviously elongated triangle-shaped head, long hairy cephalic setae, a long naked tail spinneret, and the absence of peduncle at the base of somatic setae. Daptonema longiapophysis was obtained from intertidal sandy sediments in the southern coast of Korea. It was characterized by the presence of setiform labial sensilla, spicules with a projection on both sides, and gubernaculum with dorso-caudal apophysis. Pseudosteineria sinica was discovered from the intertidal sediment in the Yellow Sea. It was characterized by unobservable amphideal fovea, different lengths of spicules, and gubernaculum with dorso-caudal apophysis. In this study, we provide detailed morphological features of three free-living marine nematodes by differential interference contrast microscopy.

During a survey of free-living marine nematodes of Korea, two new marine desmoscolecid nematodes belonging to subgenus Quadricoma Filipjev, 1922 were discovered. Tricoma (Q.) jejuensis sp. nov. and T. (Q.) unipapillata sp. nov. are described based on specimens obtained from washings of coarse sediments from eastern and southern coasts of Korea. Tricoma (Q.) jejuensis sp. nov. is characterized by having 33 quadricomoid body rings and inversion at main ring 23, pentagonal head with truncated anterior end, a pair of ocelli situated at main ring 6, somatic setae comprising of 8 pairs of subdorsal setae and 12 pairs of subventral setae, and relatively short spicules (42-46 μm long). Tricoma (Q.) unipapillata sp. nov. is characterized by 44 quadricomoid body rings and inversion at main ring 32, somatic setae comprising of 7 pairs of subdorsal setae and 10 pairs of subventral setae, globular head truncated anterior end, relatively short and stumpy cephalic setae with cuticular flange, one single naked ventral median genital papillae situated on main ring 20, and spicules with a proximally marked capitulum. Detailed morphological descriptions and illustrations of these two new species are provided in this study.