Most of the red ginseng (RG) products contain active substances derived from hot water or alcohol extraction. Since active substances of RG are divided into two two types: water-soluble and liposoluble, water or alcohol is needed as an extraction solvent and this leads the different extraction yields and components of the active substances. To overcome the limit, whole red ginseng powder can be used and consumed by consumers. In this study, the physicochemical properties and extractable active substance contents of variable-sized RG powder (158.00 μm, 8.45 μm, and 6.33 μm) were analyzed, and dispersion stability was measured to investigate the suitable size of RG powder for industrial processing. In the results, no significant difference was found from the changes in color intensity and thiobarbutric acid tests at 4°C, 25°C, and 40°C for 4 weeks. There was no significant difference on the production of antioxidants and ginsenoside among the samples (p>0.05). In dispersion stability, RG-158.00 μm was precipitated immediately, and the dispersion stabilities between RG-8.45 μm and RG-6.33 μm showed no significant difference. It implies that fine RG is suitable for the production process. With further study, it seemed that the physicochemical effects of RG particle sizes can be clearly revealed.

Excessive salt intake in body induces health risks resulting high blood pressure or heart diseases. Therefore, the low salt concentration and sale tasted food is needed by means of the modification of manufacturing process. The purpose of this study was to study the effect of inhomogeneous salt localization in bread to enhance the saltiness encapsulated salt. The 0, 0.5, 1, 1.5, and 2.0% of liposome encapsulated salt (LS) was added into the baking of white pan bread. The final salt concentration was adjusted at 2% by addition of salt. After baking the bread, the moisture content, loaf volume, fermentation rate, color, texture analysis, salt release rate and sensory test were measured. From this study, moisture content has no significant difference between control and treatments (p>0.05), except for 2.0% LS. Lightness of all treatments was higher than control (p<0.05), whereas, there were no significant difference in hardness (p>0.05). From the sensory test, the bread added 2.0% LS was showed the highest value from the salty taste. Moreover, it is related to the highest release rate of salt was represented at 2.0% LS. In conclusion, the salty intensity of bread can be enhanced by the salt localization using encapsulation of salt.

Recently, semi-dried sweet potato is popular as a natural snake for children’s dessert. The drying condition was optimized to obtain high quality of sweet potato by oven drying process. The mashed yellow and chestnut sweet potato was dried using the oven drier at different temperature (50, 60, 70, and 80°C) then evaluated for the moisture content, appearance observation, texture properties, and sugar contents and sensory test in every 2, 6 and 12 hours. During the dehydration and drying process, the ending point of moisture content divided in three zone from 0-2 hour, 4-6 hour and 8-12 hour. The moisture content was dramatically decreased from 0 hour - 8 hour, but after 8 hour there is no significant decrease. Yellow sweet potato dried at 80°C for 6 hours was investigated as good product base on the sensory test, hardness value, and color appearances as compared to chestnut potato.

There are a lot of types of wild vegetables such as Colocasia esculenta (L.) Schott stem in Korea. However, the consumption of these wild vegetables is restricted because their storage decreased dramatically after harvest. To maintain original quality of vegetables, pre-treatments such as blanching and drying are important. But conditions for these treatments were still not optimized for many vegetables including Colocasia esculenta (L.) Schott stem. Thus, the objective of this study was to set up an optimal pre-treatment method for freezing storage. Colocasia esculenta (L.) Schott stems were peeled and cut equally (10 cm) for sample preparation. Dried samples (D) were dried at 90℃ for 3 h. Blanched samples (B) were blanched in hot water at 100℃ for 2 min. Blanched and dried samples (BD) were blanched and dried as same protocol. Physicochemical properties were analyzed to evaluate the quality including texture, moisture content, total color difference and viable cell count. Raw sample had 6.85 kg/cm 3 of hardness and 78.75 of chewiness whereas B was 6.83 kg/cm 3 of hardness and 7.8 of chewiness. B had the similar value compared to raw samples. Moisture content of raw sample was 94.4% and that of B was 94.1%, though there were not any significant differences between them. ΔE value of B showed lower value than those of the others. Viable cell counts and total coliforms were not detected after treatment, while raw sample had 5.39 log CFU/g of viable cell count without total coliform. Therefore, pre-treatments are essential for microbial safety of samples. All results considered, it is supposed that blanching is the optimal pre-treatment to sustain its original quality of Colocasia esculenta (L.) Schott stems before freezing.