Kori Unit 1, the first commercial nuclear power plant (NPP) in Korea, was permanently shut down in 2017 and was scheduled for decommissioning. Various programs must be planned early in the decommissioning process to safely decommission NPPs. Radiological characterization is a key program in decommissioning and should be a high priority. Radiological characterization involves determining the decommissioning technology to be applied to a nuclear facility by identifying the radiation sources and radioactive contaminants present within the facility and assessing the extent and nature of the radioactive contaminants to be removed from the facility. This study introduces the regulatory requirements, procedures, and implementation methods for radiological characterization and proposes a methodology to link the results of radiological characterizations for each stage. To link radiological characteristics, this study proposes to conduct radiological characterization in the decommissioning phase to verify the results of radiological characterization in the transitional phase of decommissioning NPPs. This enables significantly reducing the scope and content of radiological characterization that must be performed in the decommissioning phase and maintaining the connection with the previous phase.

The present study describes Philodromus rufus Walckenaer, 1826 with detailed descriptions, taxonomic photographs, distribution map, and proposition of a new synonym. Due to morphological similarity between P. pseudoexilis Paik, 1979 and P. rufus, taxonomic identity of P. pseudoexilis has been doubtful to date. A detailed bibliographic study of types of P. pseudoexilis between P. rufus and examination of specimens from the type locality of P. pseudoexilis with specimens of P. rufus collected across the country showed that P. rufus has all diagnostic characters found in types of P. pseudoexilis. Therefore, P. pseudoexilis Paik, 1979 should be regarded as a new synonym of Philodromus rufus Walckenaer, 1826.

국립원예특작과학원에서는 밝은 화색과 안정적인 화형의 생 육이 우수한 빨간색 스탠다드 장미 품종을 육성하기 위해 진한 적색 스탠다드 장미 품종 ‘엔드리스러브(Endless Love)’를 모 본으로, 꽃잎수가 많고 안정적으로 가시가 적은 밝은 노란색 ‘페니레인(Penny Lane)’ 품종을 부본으로 인공교배하였다. 37 개의 교배실생을 양성해 1, 2, 3차에 걸친 특성검정 및 현장실증 을 통해 꽃이 크고 화형이 안정적이며, 재배안정성 및 생산성, 절화특성이 우수한 ‘원교 D1-390’을 최종 선발하였다. 2023년 ‘루비레드(Ruby Red)’로 명명하여 국립종자원에 품종보호출원·등록되었다. ‘루비레드’ 품종은 밝은 적색(R53C)을 가졌으 며, 꽃잎수가 32.8매, 화폭과 화고는 각각 10.9, 5.9cm로 대조 품종보다 크다. 절화장은 평균 71.7cm, 절화수명은 약 16.7일, 수량은 연간 168대/m2로 대조품종인 ‘레드스퀘어(Red Square)’ 대비 절화장이 길고 절화수명도 2배 이상 길며, 수확량도 1.4배 우수하다. 2023년 국내 육성 장미 품종 서울식물원 관람객 대상 공동평가회에서 스탠다드 장미 중 우수한 평가를 받았으며, 현 장 실증 결과 농가별로 균일하고 우수한 수량과 절화품질을 보 였다. 절화용 장미 ‘루비레드’ 품종은 밝은 적색과 우수한 화형 을 가지는 품종으로 해외 대체 품종으로 국내에서 많이 재배될 것으로 기대된다.

Unlike companion cats raised at home, feral cats are more likely to be infected with parasites. Feral cats can transmit parasites not only to other cats but also to pets and people. This study was conducted to investigate prevalence intestinal parasites prevalence through the fecal examination of feral cats in Gunsan City. After making a suspension in Sheather's Sucrose solution, the feces were mixed and centrifuged, and then examined under a microscope. The results were revealed mostly unsporulated oocysts and sporulated oocysts of coccidia, followed by pinworm's eggs, which showed a relatively high infection rate. Scabies and mites were also found in the feces. Due to the behavioral characteristics of cats, they tend to remove the foreign objects from their fur through grooming, which is why a lot of hairs were observed in the feces, and it is thought that this is why scabies and mites were also found in the fecal examination results. The results of this study confirm that feral cats are exposed to those parasites. It is also thought that consideration should be given to expanding the TNVR (trap-neuter-vaccinate-release) program, which can reduce the number of feral cats.

본 연구는 국립수목원 내 전문전시원에 발생한 이입식물을 대상으로 2015년부터 2023년까지 이입식물 분포조사를 시행 하였다. 그 결과 자생식물 299종, 귀화식물 49종, 재배식물 13 종 총 63과 214속 361종이 조사되었다. 국화과가 63종으로 가장 많았고, 벼과, 사초과 순으로 발생하였다. 이입식물의 이입 경로를 분석하기 위하여 광릉숲에 분포하는 식물상과 비교 분석 한 결과 309종이 광릉숲에 분포하는 식물로 확인되었으며, 전 문전시원 내 식재 식물이 확산된 경우가 17종으로 조사되었다. 조사된 귀화식물 49종을 원산지별로 구분하면 유럽과 북아메리카가 69.4%, 이입 시기별 1기와 3기의 비율이 90%를 차지하였 다. 귀화식물의 귀화도 분포 등급을 적용한 결과 4등급 이상이 면서 이입 시기가 3기인 식물 9종은 빠르게 확산할 우려가 큰 식물이므로 지속적인 모니터링이 필요하다. 국립수목원에 어느 정도 귀화식물이 분포하는지를 가늠하는 도시화지수를 산출한 결과 15.0%로 나타났으며, 환경부 지정 생태계교란 야생식물 중 돼지풀, 단풍잎돼지풀, 애기수영, 미국쑥부쟁이가 출현하였 다. 이입식물은 자생식물군락과 전문전시원 내 관람로에 침입하 여 세력권을 확장하고 우점하는 경향이 있어 각각의 생태적 특 성을 고려한 제거 방법이 필요하다.

Schlumbergera truncata absorbs CO2 through its mature phylloclades during the night, and can use a substantial amount of CO2 without requiring ventilation. This study investigated the growth and photosynthetic responses of S. truncata ‘Red Candle’ at two CO2 levels—ambient (≈ 400 μmol･mol-1) and elevated (≈ 1000 μmol･mol-1). At 0–8 weeks after treatment (WAT), width and length of mature phylloclade and length of immature phylloclade did not differ significantly among the CO2 treatments. At 4–8 WAT, number of branches and phylloclades were significantly greater in plants grown under ambient CO2 than those under elevated CO2. Net CO2 uptake was highest in mature phylloclades of plants grown under ambient and elevated CO2 regimes at night, at 2.51 and 1.30 μmol·CO2·m-2·s-1, respectively. However, no statistically significant variation was observed at 6 WAT, and stomatal conductance was significantly affected only by CO2 uptake time at 6 and 8 WAT. Water-use efficiency of mature and immature phylloclades at night increased with increase in CO2 levels (r = 0.7462 and 0.9312, respectively). At 123 days after treatment, plants grown under elevated CO2 had 82.7 floral buds, compared to 72.1 buds in those under ambient CO2. However, this difference was not statistically significant. Moreover, S. truncata grown under elevated CO2 exhibited decreased growth and photosynthesis, whereas the number of floral buds did not exhibit any significant differences among the treatments.

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200°C, 1250°C, and 1275°C. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150°C) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275°C MIM process. The HIP process can improve the quality of the alloy.

The development of thermoelectric (TE) materials to replace Bi2Te3 alloys is emerging as a hot issue with the potential for wider practical applications. In particular, layered Zintl-phase materials, which can appropriately control carrier and phonon transport behaviors, are being considered as promising candidates. However, limited data have been reported on the thermoelectric properties of metal-Sb materials that can be transformed into layered materials through the insertion of cations. In this study, we synthesized FeSb and MnSb, which are used as base materials for advanced thermoelectric materials. They were confirmed as single-phase materials by analyzing X-ray diffraction patterns. Based on electrical conductivity, the Seebeck coefficient, and thermal conductivity of both materials characterized as a function of temperature, the zT values of MnSb and FeSb were calculated to be 0.00119 and 0.00026, respectively. These properties provide a fundamental data for developing layered Zintl-phase materials with alkali/alkaline earth metal insertions.

As the complexity and uncertainty of international construction projects increase, the importance of risk management capabilities in the construction industry has become more pronounced. Accordingly, Enterprise Risk Management (ERM) has become a widely adopted approach among organizations as a new way for more effective risk management. Despite its growing application, research related to ERM is still in its infancy, and most of the existing studies have been limited to financial industries. Therefore, this study aims to empirically examine the influence of ERM’s core elements on project risk management (PRM) and project performance within construction firms. Our findings indicate that the key ERM components—organization, policy, and culture—significantly enhance PRM processes, underscoring their critical role and importance. Additionally, effective PRM positively affects project outcomes, highlighting its significance for construction companies engaged in international projects. While ERM does not directly impact project performance, it indirectly improves outcomes through enhanced PRM capabilities. It suggests that ERM will contribute to the firm’s performance by improving the firm’s PRM capability through policies and a risk-focused culture corresponding to the adopted ERM organization and system..

As environmental concerns escalate, the increase in recycling of aluminum scrap is notable within the aluminum alloy production sector. Precise control of essential components such as Al, Cu, and Si is crucial in aluminum alloy production. However, recycled metal products comprise various metal components, leading to inherent uncertainty in component concentrations. Thus, meticulous determination of input quantities of recycled metal products is necessary to adjust the composition ratio of components. This study proposes a stable input determination heuristic algorithm considering the uncertainty arising from utilizing recycled metal products. The objective is to minimize total costs while satisfying the desired component ratio in aluminum manufacturing processes. The proposed algorithm is designed to handle increased complexity due to introduced uncertainty. Validation of the proposed heuristic algorithm's effectiveness is conducted by comparing its performance with an algorithm mimicking the input determination method used in the field. The proposed heuristic algorithm demonstrates superior results compared to the field-mimicking algorithm and is anticipated to serve as a useful tool for decision-making in realistic scenarios.

This study introduces a novel approach for identifying potential failure risks in missile manufacturing by leveraging Quality Inspection Management (QIM) data to address the challenges presented by a dataset comprising 666 variables and data imbalances. The utilization of the SMOTE for data augmentation and Lasso Regression for dimensionality reduction, followed by the application of a Random Forest model, results in a 99.40% accuracy rate in classifying missiles with a high likelihood of failure. Such measures enable the preemptive identification of missiles at a heightened risk of failure, thereby mitigating the risk of field failures and enhancing missile life. The integration of Lasso Regression and Random Forest is employed to pinpoint critical variables and test items that significantly impact failure, with a particular emphasis on variables related to performance and connection resistance. Moreover, the research highlights the potential for broadening the scope of data-driven decision-making within quality control systems, including the refinement of maintenance strategies and the adjustment of control limits for essential test items.