Virtual reality (VR) simulation in nursing education, especially in the teaching of VR simulations just prior to clinical practice, has the potential to enhance the effectiveness of clinical practice and better prepare nursing students for patient care. The aim of this study was to evaluate the effect of a preclinical VR simulation education program on the development of critical thinking, self-efficacy, problem-solving ability, and perceived clinical competency among undergraduate nursing students. The study was conducted between May and June 2021 using a pretest-posttest design with a control group. A total of 42 nursing students were recruited through convenience sampling from two separate classes. The intervention group participated in VR simulation education, while the control group engaged in lecture-based education, before beginning clinical practice. Assessments were conducted before preclinical education and after completing clinical practice using structured questionnaires. The data was analyzed using chi-square tests, independent t-tests, and ANCOVA. The findings indicated that the intervention group had a significantly higher score in perceived clinical competency compared to the control group (F = 5.25, p = 0.029) after controlling for pretest scores. However, there were no statistically significant differences in critical thinking, self-efficacy, or problem-solving abilities between the two groups. These findings suggest that preclinical VR simulation education is partially effective in preparing nursing students for their clinical practice, underscoring the need for a balanced educational approach that integrates VR with clinical practice to develop a full spectrum of nursing skills and knowledge.

이 연구는 1세대 스마트 온실의 재배환경 데이터와 장미 절 화의 품질 특성 데이터를 수집하고 그 요인들 간의 상관 관계 를 분석하여 절화수명 예측 및 최적 환경 조성의 기초 자료를 얻고자 수행되었다. 이를 위해, 토경재배(SC) 및 암면배지경 양액재배(RWH) 하우스 각 1개소를 선정하여 1년간 기온, 상 대습도(RH) 및 수증기압차(VPD), 일적산광량(DLI), 근권온도 등의 환경 데이터와 매월 말 수확된 장미 ‘Miss Holland’ 절 화의 품질 특성 데이터를 수집하였으며, 이 데이터와 절화수 명과의 상관관계를 분석하였다. 절화수명은 10월과 11월을 제외하고는 SC 하우스에서 RWH 하우스보다 더 길었다. 절 화수명과 환경 및 생육 특성 간의 상관관계 분석에서 SC 하우 스의 상관계수는 RWH 하우스보다 조금 더 높았으며, 절화수 명 예측을 위한 요소들도 두 하우스 간에 차이가 있었다. SC 하우스의 절화수명 Y=0.848X1+0.366X2-0.591X3+2.224X4- 0.171X5+0.47X6+0.321X7+9.836X8-110.219(X1-X8: 최고 RH, RH 일교차, DLI, pH, Hunter’s b value, EC, 절화 장, 잎 두께; R2=0.544)로 예측되었고, RWH 하우스의 절화수명 Y=-1.291X1+52.026X2-0.094X3+0.448X4-3.84X5+0.624X6 - 8.528X7+28.45(X1-X7: 경경, 야간 VPD, 최고 근권온도, 최 저 근권온도, 기온 일교차, RH 일교차, 최고 VPD; R2=0.5243) 로 예측되었다. 이 두 모델식으로부터 SC 하우스에서는 RH, EC 및 pH가, 그리고 RWH 하우스에서는 근권 온도가 절화수명에 더 큰 영향을 미친다는 것을 추론할 수 있다. 따라서 각 재배 방법에 따라 장미의 절화수명에 더 큰 영향을 미치는 환경적 요인을 효율적으로 관리할 필요가 있다.

한국의 정원수는 2015년 7개에서 2022년 98개로 급격히 증가하였다. 늘어나는 정원 인프라의 수에 비해서 유지관리를 위한 지속적 정책과 연구는 미진한 상황이다. 본 연구는 효율 적인 정원 관리 정책을 도출하기 위해 주민들의 인식을 조사 하였다. 토픽 모델링, 감성 분석 등 텍스트 마이닝을 활용해 정원 참여 유형에 따른 주민 인식을 조사하였다. 주민 주도 정 원 그룹에서는 ‘정원정책’, 관 주도 정원 그룹에서는 ‘주민에 게 미치는 영향’이라는 주제에 의견이 집중되었다. 감성 분석 에서는 주민 주도 정원 그룹이 관 주도 정원 그룹보다 긍정어 점수가 더 높았다. 이러한 결과는 주민과 만족도 사이에 강한 사회적 연결이 있음을 나타낸다. 또한 주민 주도 정원 그룹에 서는 유지관리 업무를 맡은 주민들이 이를 자기계발의 한 형 태로 여기는 것으로 나타났다. 이러한 결과는 주민 주도 정원 관리 유형이 정원정책에 시사하는 바가 크며, 정원 내 일자리 와도 관련이 있음을 알 수 있다.

자생 부추속 식물 중 강부추(Allium thunbergii for. rheophytum ined.)와 갯부추(A. pseudojaponicum Makino)는 관상용, 식 용 및 약용자원으로 가치가 있으나 육묘를 위한 생육환경조건 구명이 미비하여 연구할 필요성이 있다. 본 연구는 강부추와 갯부추의 육묘에 미치는 플러그 셀 크기, 차광률, 시비처리에 따른 영향을 구명하기 위하여 실험을 수행하였다. 강부추와 갯부추를 육묘한 결과, 플러그 셀 크기에서는 50, 72, 105, 128, 162, 200셀 처리 중 용적이 가장 큰 50셀에서 초장, 엽 수, 근수, 그리고 근장의 생육이 우수하였다. 그러나 생산비용 과 플러그 육묘의 효율성을 고려하여 105셀 이상의 플러그 트레이 중에서 선택하여 육묘하는 것이 효과적이라 판단된다. 차광률에 따른 유묘는 0, 30, 60, 90% 처리 중 30~60% 차 광처리에서 초장, 근수, 그리고 근장이 유의적으로 높게 측정 되어 생육이 양호하였다. 시비처리에서 생중량과 건중량을 제 외한 생육지표를 검토했을 때, 강부추의 적정 시비처리는 속 효성 고형비료(DO-PRO) 0.1g, 갯부추는 속효성 액체비료 (Peters) 주 1회 8mL 엽면시비처리였고 두 종 모두 속효성 시비처리가 효과적이었다. 강부추와 갯부추의 초기 생육에는 30~60% 차광처리가 된 재배플롯에서 원예상토가 충진된 128셀 플러그 트레이에 종자를 파종한후, DO-PRO 0.1g 또 는 Peters 8mL를 주 1회 엽면시비하면서 재배하는 것이 효 과적이라 판단된다.

본 연구는 국내에서 실내 관상용으로 많이 활용되는 스킨답 서스의 실내재배 시 적정 인공광원, 수경재배 전기전도도 농 도 및 용토를 선발하기 위하여 수행하였다. 실내재배 시 인공 광원은 형광등, 적청 LED, 백색 LED로 처리하였다. 수경재배 시 양액 농도는 EC 1.2, 1.6, 2.0ds·m-1 수준으로 하였고, 재 배용토는 제올라이트, 코코피트, 펄라이트, 황토볼 4가지로 달리하였다. 스킨답서스의 실내 재배 시 줄기 길이는 형광등 과 적청 LED 처리보다 백색 LED 처리에서 길어졌다. 잎의 크기는 적청 LED 처리에서 형광등과 백색 LED 처리보다 커 지는 경향이었다. 엽록소 지수값은 백색 LED>적청 LED>형광 등 순으로 높았다. 수경재배 시 스킨답서스의 줄기길이는 EC 농도가 높아질수록 길어지는 경향이었고, 용토별로 비교하면 제올라이트와 코코피트에서 높은 경향이었다. 엽록소 지수값 도 EC 농도와 비례하여 높아졌고, 용토별로는 제올라이트와 코코피트에서 높았다. 스킨답서스의 생체중도 EC 농도가 높 을수록 높았고, 제올라이트와 코코피트에 높은 경향이었다. 상기 결과들을 종합할 때, 스킨답서스의 NFT를 이용한 실내 재배 시 적정 인공광원으로는 백색 LED를, 수경재배 양액의 농도는 EC 1.6∼2.0ds·m-1를, 그리고 NFT 용토는 제올라이 트나 코코피트가 적합하다는 것을 알 수 있었다.

Pasture formation and management are crucial to avoid yield reduction. This experiment aimed to examine the effects of tall fescue-centered mixed-seeding combinations on yield and vegetation changes in perennial pastures in the central region for two years, from September 2020 to October 2022. The treatments were arranged in three replications in a randomized block design: control (C), tall fescue-based mixture-1 (T-1), and tall fescue-based mixture-2 (T-2). The tall fescue (TF), orchard grass (OG), perennial ryegrass (PRG), Kentucky bluegrass (KBG), and white clover (WC) were used. The emergency rate of grasses (70.0 to 73.3%) did not differ among mixed seeding combinations. Overwintering rates (81.7 to 83.3%) were similar among treatments. The plant height of grasses was similar at each harvest date, with the highest height (86.2 cm) recorded in the second harvest of the first year, followed by that (58.4 cm) in the third harvest of the first year; it was least (38.9 cm) in the fourth harvest of the second year. There was no significant difference in the dry matter yield of grasses among the mixed seeding combination treatments in the first, third, or fourth harvests of the first year (p>0.05). For second-year grasses, dry matter yield was not significantly different in harvest date among the treatments (p>0.05). Based on mixed seeding ratio, orchard grass showed the highest yield at 70% in the C treatment, followed by tall fescue at 80% and 60% in the T-1 and T-2 treatments, respectively, in the first harvest after seeding. There was no significant difference in feed value between treatments (p>0.05), but a significant difference was observed between the third and fourth harvest (p<0.05). Therefore, it indicated that it is important to create perennial pastures in the central region through mixed seeding combinations centered on tall fescue.

This study aimed to develop a new eco-friendly control method of B. tabaci using a trap plant treated with systemic insecticide. Due to high preference, tobacco plant was selected as a trap plant among solanaceous plants. Out of all 6 systemic insecticides, dinotefuran WG showed the highest mortality (> 97.3 %) against B. tabaci. The concentrations of dinotefuran in tobacco leaves after systemic treatment showed the sharp increase in the pesticide from 2 hrs until 48 hrs (2 d) and steady increase over 35 d. The mortality of B. tabaci in tobacco leaves was about 80% at 9 hrs after treatment and over 90% at 1, 2, 3, 6, 9, and 35 d after treatment. The number of B. tabaci was counted every week after dinotefuran-treated tobacco pots were placed in the tomato greenhouse cultivation. The density of the insects with 3 tobacco plants was app. 75% lower than the control (w/o tobacco plant).

The fall armyworm (FAW), Spodoptera frugiperda (Lepidoptera: Noctuidae), which is native to tropical and subtropical regions of the Western Hemisphere is now annually arrives in Korea. In this study, we developed loop-mediated isothermal amplification (LAMP) assay, one of the main merits of which is a rapid identification of target species. Five among 11 FAW-specific loci tested successfully provided a consistent reaction when ten FAWs, which were collected from eight localities in four countries were tested, whereas the 13 non-target species were not amplified. To increase in-field applicability of the method all life stages, reaction time, and different periods after death was tested using the quick extracted DNA. Our FAW diagnostic protocol can be completed within 30 min, from the process of extracting genomic DNA from an egg or a 1st instar larva to species determination.

An outbreak of stick insects, Ramulus mikado, as forest pests in South Korea has become a topic of concern. While other countries have reported these insects being severely affected by the entomopathogenic fungus Metarhizium spp., comprehensive research in South Korea remains limited on this topic. In our two-year investigation, we investigated the infection rate and mortality of R. mikado caused by Metarhizium anisopliae. In 2022, specimens were collected from Cheonggyesan, and in 2023 from Geumamsan. Although no infections were confirmed in the specimens collected in June of both years. Beginning in July, mortality and infection rates were greatly increased. In conclusion, the summer monsoon appears to create hot and humid conditions in the forest, contributing to reduced survival rates for these insects due to infection by M. anisopliae.

대벌레(Ramulus mikado)는 1990년 이후부터 2000년대 초반까지 경북을 중심으로 대발생을 하였던 돌발 해충 으로 2020~2023년에 수도권에서 대발생 사례가 다수 보고 되었다. 대벌레의 대발생 원인으로 기후변화가 지목되 고 있지만, 대벌레 개체군과 생물적·비생물적 환경 조건과의 관계를 이해하기 위한 연구는 매우 부족한 실정이 다. 본 연구에서는 주요 기주식물과 대벌레 발생 양상에 대한 관계를 이해하고자 수행하였다. 2022년부터 2023년 까지 대벌레 대발생 지역 중 하나인 청계산 일대 등산로를 따라 조사구를 선정한 뒤 주요 기주식물이자 우점종인 신갈나무, 아까시나무, 잔털벚나무를 대상으로 대벌레의 발생 밀도를 조사하였다. 그 결과, 조사지점 간의 대벌 레 평균 밀도는 유의한 차이가 발견되지 않았지만, 기주식물에 따른 밀도의 차이는 뚜렷하게 나타났다.

The walking-stick insects, Ramulus mikado, are outbreaks in several mountainous areas from 2020 to 2022. In recent, some population of the insect are showed rapidly decline in their abundance, while some of them are still maintained high population density. In worldwide, insects belonging to Phasmida are reported to outbreak in their habitats as mentioned above environments, but knowledge about outbreak pattern of the walking-stick insects is still lacking. In this study, we aimed which biological and environmental factors are related to wax and wane of the insect population. From 2022 to 2023, we studied host tree preferences in natural conditions, ecological stoichiometry in major host trees, overwintering ecology of R. mikado eggs, and infection rate by entomophathogenic fungi during growing season.

As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens’ daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.

To functionally classify the types of gardens that can be used in a city, this study examined the perceived functions of gardens in Korea by reviewing the previous case studies, field surveys concerning gardens in cities, and interviews with stakeholders. First, the roles and effects of gardens identified in the earlier studies were clustered into similar concepts. To ensure validity, the types of functions of the gardens were named based on opinions gathered through meetings with experts. Field surveys were conducted on 31 cases studied over four years. The data obtained were applied to supplement the redefined classification criteria and items for gardens in the city as described above. The current status of the gardens was analyzed by type. The gardens were divided into four categories: socio-cultural, environmental, economic, and health-related. The sociocultural type was dominant among the community gardens in Korea. The results of this study may be used as a reference for the intended function of building an urban garden and to prepare guidelines for introducing socio-cultural, environmental, economic, and health-type gardens in the future.

Modernism is an internationally accepted design style. In addition, traditional Korean costume is not the clothing of the past, but its form is also used in modern fashion. Therefore, the purpose of this study is to examine the social and cultural contents of the morphological structure of traditional Korean costume, in order to derive the design characteristics of modernism and examine the global applicability of traditional Korean costume structure. For this study, photographic materials from museums, schematic drawings of relics, and Hanbok production books published by government agencies were analyzed. Further, this study examined traditional Korean costume, especially the modernism characteristics derived from Paul Greenhalgh and previous studies. The results are as follows. First, The traditional Korean costume is a cut based on basic shapes, along with a silhouette appears according to the background of the times. Second, the characteristics of modernism can be divided into universality, functionality, and simplicity. Third, as a result of analyzing the form structure of traditional Korean costume based on the characteristics of modernism, universality is expressed as standardized form, functionality as practical aesthetics, and simplicity as sustainable diversity. Furthermore, Korean costume has a difference in that was greatly influenced by various Eastern ideas and aesthetics of the late Joseon Dynasty. These findings provide a perspective of modern reinterpretation of the uniqueness and universality of traditional Korean costume in line with globalization by utilizing the design characteristics of modernism, an international style.

부추속은 수선화과에 속하며 약 1000여종에 이른다. 좀부 추는 자생 부추속에 속하며 식용이 가능하고 크기가 작아 분 화식물로 적합하다. 이에 따라 본 연구는 좀부추를 분화 소재 로서 개발하기 위하여 식물의 측지성장을 촉진하고 꽃의 품질 을 향상시키기 위해 수행되었다. 이를 위하여 좀부추의 구근 을 생장조절제(GA3, BA, 에테폰, TDZ)에 다른 시간(1, 5시 간)동안 침지처리했을 때 식물의 생장과 꽃에 어떤 영향을 주 는지 조사하였다. GA3 처리구는 엽수와 자구의 수가 증가해 증식을 촉진시키는 효과가 있었다. 게다가 GA3는 화수의 증 가와 조기개화를 유도했다. 그러나 엽폭과 화경의 폭은 감소 하였다. 에테폰은 좀부추의 초장과 초폭에서 영향을 주지 않 았으나 1h에서 자구의 수가 증가하였다. 에테폰은 화서 발생 을 억제하여 화경의 수가 감소하였다. BA는 식물의 생장과 개 화 특성에 유의적인 영향을 보이지 않았다. TDZ처리한 식물 은 왜화되고 생육상태가 불량하였으며, 식물을 고사시켰다.

This study aimed to investigate the effect of visual input enhancement (VIE) on the comprehension of reading texts and the learning of two grammatical forms: English relative clauses and articles. Individual learners’ working memory (WM) capacity was also tested to explore its impact on the effectiveness of VIE. A total of 48 Korean college learners of English were assigned into three groups: (a) relative group receiving VIE on relative clauses (b) article group receiving VIE on articles, and (c) a control group receiving no VIE. Results showed that VIE did not have any negative effect on the learners’ reading comprehension. Rather, it had positive effects on the learning of the two grammatical forms. According to the findings, VIE on relative clauses enhanced the learners’ receptive knowledge of the grammatical form, whereas VIE on articles enhanced the learners’ productive knowledge of the form. There was a potential link between the effectiveness of VIE and the learners’ working memory processing ability. Pedagogical implications are also discussed based on these findings.

Some consumer goods containing radioactive substances are in circulation and used in everyday life. In accordance with the Nuclear Safety Act, consumer goods with radioactivity are regulated. However, since most consumer goods distributed in Korea have no information that can confirm the amount of radiation, it is necessary to analyze the radiation for safety regulation. Among these consumer goods, GTLS (Gaseous Tritium Light Source) contains gaseous tritium (tritium, written as 3H or T), which is a radioactive material. The gaseous composition ratio in GTLS was analyzed using a precision gas mass spectrometer (Thermo Fisher, model MAT 271). As a result of GTLS analysis, the H2, HD or H3 +(T) or 3He, HT or D2 or He, DT, and T2, which correspond to the mass-to-charge ratio (m/z) 2 to 6 and the air components were detected. In addition, substances corresponding to m/z=24 and m/z=21 were also detected. These were compared with pure CH4 and those fragmentation patterns. The ratios of CT4 (m/z = 24) to CT3 (m/z = 21) and CH4 (m/z = 16) to CH3 (m/z = 15) were compared and they agree within the measurement uncertainty. We also performed additional experiments to separate the water component in the GTLS samples, considering the possibility that the m/z = 21 to m/z = 24 region is tritium compounds based on H2O. Despite the removal of the water components, peaks were detected at m/z=21 and m/z=24. Therefore, we confirmed that the component of m/z = 24 in the GTLS sample was CT4.

The stabilization techniques are highly required for damaged nuclear fuel to strengthen safety in terms of transportation, storage, and disposal. This technique includes recovering fuel materials from spent fuel, fabrication of stabilized pellets, and fabrication of fuel rods. Thus, it is important to identify the leaching behavior of the stabilized pellets to verify their stability in humid environments which are similar to storage conditions. In this study, we introduce various leaching experiment methods to evaluate the leaching behavior of the stabilized pellets, and determine the most suitable leaching test methods for the pellets. Also, we establish the leaching test conditions with various factors that can affect the dissolution and leaching behavior of the stabilized pellets. Accordingly, we prepare the simulated high- (55 GWd/tU) and low- (35 GWd/tU) burnup nuclear fuel (SIMFUEL) and pure UO2 pellets sintered at 1,550°C and 1,700°C, respectively. Each pellet is placed in a vessel and filled with DI water and perform the leaching test at three different temperature to verify the leaching mechanism at different temperature range. Based on the standard leaching test method (ASTM C1308-21), the test solution is removed from the pellet after specific time intervals and replaced in the fresh water, and the vessel is placed back into the controlled-temperature ovens. The test solutions are analyzed by using ICP-MS.