The objective of this study was to assess the effects of gypsum application on dry matter yield (DMY), mineral content of alfalfa (Medicago sativa L.), and soil properties in reclaimed tidal land in South Korea. The experiment was conducted in Seokmun, located on the west coast of South Korea, which is reclaimed with approximately 70 cm depth of degraded island soil. Treatments consisted of a control with no gypsum application (G0), 2 ton ha-1 (G2), and 4 ton ha-1 (G4) of gypsum application. The first harvest was carried out when the alfalfa reached 10% flowering, and subsequent harvests were conducted at 35-day intervals. Over the three-year experimental periods (2019-2021), the total DMY of G2 treatment was significantly higher than those of G0 and G4 (p<0.05). Although both G2 and G4 gypsum application treatments lowered soil pH, the G4 treatment increased the electrical conductivity (EC) content of the soil. Additionally, gypsum application affected the mineral contents of alfalfa, resulting in reduced concentration of sodium (Na) and Magnesium (Mg). Therefore, this present study suggests that a gypsum application rate of 2 ton ha-1 is optimal for improving alfalfa dry matter yield and mineral balance, as well as enhancing soil chemical properties in reclaimed tidal land in South Korea.

Background: Chronic ankle instability (CAI) is very common disease. Strength exercise, balance exercise, and proprioceptive exercise were used to improvement of function for CAI. Isokinetic strength and balance are related to functional movement of lower extremity. Objectives: The purpose was to analyze the effect of muscle strengthening exercise, balance exercise, and proprioceptive exercise on isokinetic strength and balance in young adults with CAI. Design: Randomized controlled trial. Methods: The subjects were 30 young adults with CAI. The subjects randomly divided into three groups: strengthening exercise, balance exercise, and proprioceptive exercise. They performed each exercise for 20 minutes, three times a week for four weeks. They measured isokinetic strength of dorsiflexor and plantar flexor of 60°/sec and 120°/sec, static and dynamic balance before and after exercise. Results: The isokinetic strengths of dorsiflexor and plantar flexor of 60°/sec and 120°/sec were significantly higher in the strengthening exercise group than in the balance exercise group. The static and dynamic balance was significantly higher in the balance exercise group than in other two groups. Conclusion: Strengthening exercise, balance exercise, proprioceptive exercise can improve the muscle strength for CAI. Strengthening exercise and balance exercise can more improve balance than proprioceptive exercise for CAI.

This study was conducted to investigate changes in immunoglobulin G (IgG) concentration, nutrient content, and microbial communities of fresh and heat-treated Holstein colostrum collected from a colostrum bank operated by a local agricultural technology center in Gyeongsangbuk-do, South Korea. Of the 16 colostrum samples, 8 were heated at 60℃ for 30 min under a pressure of 0.9–1 bar. The colostrum samples were stored at −70℃ until use, at which time they were thawed at 50–55℃ in a water bath to analyze IgG levels, chemical composition, and microbiome, which was identified by 16S rRNA gene sequencing using the Illumina MiSeq-PE250 platform. The IgG concentrations were similar in fresh and heat-treated colostrum. The fat, protein, and lactose contents also did not differ in these samples. However, somatic cell count (SCC) was lower in heat-treated colostrum than those in fresh colostrum (p<0.05). At the phylum level for the microbiome of fresh colostrum, Proteobacteria (44.16%) was the most abundant taxa, followed by Bacteroidota (33.26%), Firmicutes (10.04%), Actinobacteriota (7.14%), and a marginal difference in the order of abundance was observed in heat-treated colostrum. At the genus level, bacteria belonging to Sphingomonas, Delftia, Ochrobactrum, Simplicispira, and Lactobacillus were more abundant (p<0.05) in the heat-treated colostrum, while the abundance of Acinetobacter in the fresh colostrum was four times more (p<0.05) than that in the heat-treated colostrum. Our results demonstrated that heating does not affect IgG level and colostrum composition but reduces SCC (p<0.05), suggesting that heat-treated colostrum can potentially be put to further use (e.g., feeding Hanwoo calves) without compromising its quality. Differences in the microbiome between the fresh and heat-treated colostrum were limited. Further studies are required to extensively investigate the quality and safety of colostrum collected from dairy farms to ensure better utilization and processing at a local agricultural technology center.

This study examined the feeding behavior and growth performance of 31 Hanwoo steers (10 months old; 278 ± 36.13 kg) within a precision livestock farming system using Roughage Intake Control (RIC) units for real-time data collection. Feeding behavior traits were derived from RIC database data using R software, with subsequent analysis conducted using SAS software. The results indicated that the steers visited the feed stations every 31.12 ± 11.99 minutes, averaging 11 ± 3.37 visits/day. Each feeding session lasted an average of 5.90 ± 1.55 minutes, resulting in a feed intake rate of 77.98 ± 22.53 g/min. Mean daily feed intake was 4.76 ± 1.36 kg, and body weight increased consistently, reaching an average of 412 ± 43.44 kg, with an average daily gain (ADG) of 1.26 ± 0.38 kg. Pearson correlation analysis revealed a strong relationship between daily feed intake and visit duration (r² = 0.621; p < 0.01) and an inverse correlation between daily feed intake and feed intake duration (r² = −0.445; p < 0.05), indicating behavioral adaptation. These findings highlight the importance of monitoring feeding behavior traits concerning growth performance, enhancing our understanding of individual animal behavior and its implications for productivity while emphasizing the role of advanced technologies in optimizing feed utilization in confined livestock systems.

This review examines the microstructural and mechanical properties of a Ti-6Al-4V alloy produced by wrought processing and powder metallurgy (PM), specifically laser powder bed fusion (LPBF) and hot isostatic pressing. Wrought methods, such as forging and rolling, create equiaxed alpha (α) and beta (β) grain structures with balanced properties, which are ideal for fatigue resistance. In contrast, PM methods, particularly LPBF, often yield a martensitic α′ structure with high microhardness, enabling complex geometries but requiring post-processing to improve its properties and reduce stress. The study evaluated the effects of processing parameters on grain size, phase distribution, and material characteristics, guiding the choice of fabrication techniques for optimizing Ti-6Al-4V performance in aerospace, biomedical, and automotive applications. The analysis emphasizes tailored processing to meet advanced engineering demands.

Electrochemical oxidation and reduction reactions are fundamental in various conversion and energy storage devices. Functional materials derived from MOFs have been considered promising as electrical catalysts for ORR, HER, and OER, which can be used in Zinc-air batteries and water electrolysis. Herein, we designed a novel approach to fabricating the ultrafine Co9S8 embedded nitrogen-doped hollow carbon nanocages ( Co9S8@N-HC). The method involved a process of sulfidation of cobalt-based metal–organic frameworks (ZIF67) and then coating them with polypyrrole (PPy). PPy has notable properties such as high electrical conductivity and abundant nitrogen content, rendering it highly promising for catalytic applications. The Co9S8@ N-HC catalyst was successfully synthesized via the carbonization of CoSx@ PPy. Remarkably, the Co9S8@ N-HC catalyst demonstrated exceptional electrocatalytic activity, requiring only low overpotentials of 285 mV and 201 mV at 10 mA cm‒ 2 for OER and HER, respectively, and exhibited high activity for ORR, with an onset potential ( Eonset) of 0.923 V and half-wave potential ( E1/2) of 0.879 V in alkaline media. The electrocatalytic efficiency displayed by Co9S8@ N-HC opens a new line of research on the synergistic effect of MOF-PPy materials on energy storage and conversion.

We aimed to evaluate the effectiveness of ensemble optimal interpolation (EnOI) in improving the analysis of significant wave height (SWH) within wave models using satellite-derived SWH data. Satellite observations revealed higher SWH in mid-latitude regions (30o to 60o in both hemispheres) due to stronger winds, whereas equatorial and coastal areas exhibited lower wave heights, attributed to calmer winds and land interactions. Root mean square error (RMSE) analysis of the control experiment without data assimilation revealed significant discrepancies in high-latitude areas, underscoring the need for enhanced analysis techniques. Data assimilation experiments demonstrated substantial RMSE reductions, particularly in high-latitude regions, underscoring the effectiveness of the technique in enhancing the quality of analysis fields. Sensitivity experiments with varying ensemble sizes showed modest global improvements in analysis fields with larger ensembles. Sensitivity experiments based on different decorrelation length scales demonstrated significant RMSE improvements at larger scales, particularly in the Southern Ocean and Northwest Pacific. However, some areas exhibited slight RMSE increases, suggesting the need for region-specific tuning of assimilation parameters. Reducing the observation error covariance improved analysis quality in certain regions, including the equator, but generally degraded it in others. Rescaling background error covariance (BEC) resulted in overall improvements in analysis fields, though sensitivity to regional variability persisted. These findings underscore the importance of data assimilation, parameter tuning, and BEC rescaling in enhancing the quality and reliability of wave analysis fields, emphasizing the necessity of region-specific adjustments to optimize assimilation performance. These insights are valuable for understanding ocean dynamics, improving navigation, and supporting coastal management practices.

In this study, polyimide (PI)-based activated carbon fibers (ACFs) were prepared for application as electrode materials in electric double-layer capacitors by varying the steam activation time for the PI fiber prepared under identical cross-linking conditions. The surface morphology and microcrystal structural characteristics of the prepared PI-ACFs were observed by field-emission scanning electron microscopy and X-ray diffractometry, respectively. The textural properties (specific surface area, pore volume, and pore size distribution) of the ACFs were calculated using the Brunauer–Emmett–Teller, Barrett–Joyner–Halenda, and non-local density functional theory equations based on N2/ 77 K adsorption isotherm curve measurements. From the results, the specific surface area and total pore volume of PI-ACFs were determined to be 760–1550 m2/ g and 0.36–1.03 cm3/ g, respectively. It was confirmed that the specific surface area and total pore volume tended to continuously increase with the activation time. As for the electrochemical properties of PI-ACFs, the specific capacitance increased from 9.96 to 78.64 F/g owing to the developed specific surface area as the activation time increased.

고주파 흡수제(Accusorb MRI)를 이용한 자기공명영상 검사 중 화재가 발생했다. 다행히 환자는 화상을 입지는 않았 지만 스트랩과 4채널 코일의 케이블, Accusorb MRI가 녹아서 탄 흔적이 발견되었다. 자기공명영상 검사에 사용되 는 도구의 안전 지침을 준수해야 하지만 이를 지키지 않으면 화상, 열상, 장비 손상의 위험이 있다. 사고를 방지하기 위해서는 철저한 사전 점검을 해야 하고 모든 기기, 물품들이 자기공명영상 검사 시 사용 가능한 제품인지 확인하고 사용법을 정확하게 숙지하여야 한다.

This study prepares highly porous carbon (c-fPI) for lithium-ion battery anode that starts from the synthesis of fluorinated polyimide (fPI) via a step polymerization, followed by carbonization. During the carbonization of fPI, the decomposition of fPI releases gases which are particularly from fluorine-containing moiety (–CF3) of fPI, creating well-defined microporous structure with small graphitic regions and a high specific surface area of 934.35 m2 g− 1. In particular, the graphitic region of c-fPI enables lithiation–delithiation processes and the high surface area can accommodate charges at electrolyte/electrode interface during charge–discharge, both of which contribute electrochemical performances. As a result, c-fPI shows high specific capacity of 248 mAh g− 1 at 25 mA g− 1, good rate-retention performance, and considerable cycle stability for at least 300 charge–discharge cycles. The concept of using a polymeric precursor (fPI), capable of forming considerable pores during carbonization is suitable for the use in various applications, particularly in energy storage systems, advancing materials science and energy technologies.

광릉 숲의 곤충상 조사는 1932년으로 거슬러 올라간다. 광릉 숲의 경로조사법에 의한 나비상 모니터링 연구는 1998년부터 2023년까지 지속되었다. 26년 동안 총 223회 조사를 실시한 결과 118종, 20,181개체가 확인되었다. 봄철 출현하는 나비중 8종(노랑나비, 대만흰나비, 먹부전나비, 멧팔랑나비, 쇳빛부전나비, 애호랑나비, 큰줄흰나 비, 흰줄표범나비)은 첫 출현일이 빨라지는 경향을 보였으며, 평균 5.2일 빨라졌다. 조사된 나비중에서 큰줄흰나 비, 뿔나비, 남방부전나비 순서로 많은 개체수가 확인되었으며, 연 출현 빈도는 큰줄흰나비가 26회로 가장 많았다. 확인된 나비의 분포, 서식지, 식성에 따라 분류한 결과 분포는 북방계 27%, 남방계 14%이며, 서식지는 산림 경계 36%, 산림 내부 33%, 초지 30% 그리고 식성은 다식성 8%, 단식성 42%, 협식성 51%로 이루어진 것이 확인되었다. 또한, 기후변화 따른 나비류 생활주기 변화 여부를 검토하여 지구온난화 지표 자료로 활용할 계획이다.

Tropilaelaps mercedesae Anderson and Morgan, 2007 (Acari: Laelapidae) is a serious ectoparasite of the brood of several honey bee species. Among the four recognized species of Tropilaelaps, Korean population was renamed as T. mercedesae from T. clareae on the basis of morphological evidences and genetic data. In this study, we report the complete mitochondrial genome (mitogenome) sequence of T. mercedesae. The 15,119-bp long mitogenome has an identical gene arrangement to that of Chinese sample reported previously. Comparison of two geographic samples showed COII, ND5, ND4, ND6, CytB, and ND1 to have higher number of variable sites than COI, which is often used for population-level study, suggesting these genes to have potential usefulness for population genetic study. The mitogenome sequence of T. mercedesae from Korea could be useful for species identification for geographic samples, trace of the origin of local populations, and illustration of evolutionary distinction among Tropilaelaps species either using part of or whole genome.