The basalt fiber is expected to become a trend for industrial fibers as they have better properties of heat-resistant, non-combustion, absorbent, soundproof, moistureproof, lightweight, corrosion resistant, and high strength properties. Also, the fiber is found to be non-toxic and harmless to the human body. Therefore, in this study, we analyzed the chemical and mineral compositions of powdered sludge of basalt produced at seven sites on Jeju Island for the development of fire resistance insulating material for a building. The results showed that the basalt stone sludge is made from only sodium calcium aluminum silicate and ferridioside components unlike the basalt rock.

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

In this study, we investigated to the heat transfer performance of coating nano-structure with various shapes and patterns on the heat transfer surface. As a result of the measurement of the 3D nano shape, it was confirmed that the roughness generally increases when the adhesive is sprayed on the coating surface and finished durability experiment. In the case of TEOS adhesive, the roughness increased by 0.074 ㎛, 0.012 ㎛ and 0.015 ㎛, and the contact angle decreased 12.64°, 1.31°, 9.84° at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of PVA adhesive, the roughness increased by 0.069 ㎛, 0.056 ㎛ and 0.03 ㎛, and the contact angle decreased 2.85°, 4.82°, 6.96° at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of DGEBF adhesive, the roughness increased by 0.042 ㎛, 0.053 ㎛ and 0 ㎛, and the contact angle decreased 0.81° at the coating time of 120 seconds, increased 4.82°, 6.96° at the coating time of 180 seconds and 240 seconds, respectively. As a result, the durability tends to decrease as more nano-structures are deposited, and 3D nano shapes, contact angles and SEM photographs showed that the performance of the PVA adhesive was superior among the three adhesives.

An assessment was made of the biological control potential of mud loaches, Misgurnus mizolepis, toward Culex pipiens molestus, in laboratory condition and septic tank and rainwater storage tank (RST) systems. Results were compared with those of temephos 20% emulsifiable concentrate (EC) and Bacillus thuringiensis israelensis (BTI). In the laboratory tests, all M. mizolepis survived on waters from the settling tank of aerobic septic tank (AST), sump tank of AST, and RST. However, all M. mizolepis died within 3 h after introduction in the settling tank and sump tank waters of anaerobic septic tank (AnAST). Gill or dorsal fin inflammation was detected in the dead mud loaches. M. mizolepis consumed an average of 968–1087, 901–986, and 993–1087 of 1500 third instars of Cx. p. molestus in AST settling tank, AST sump tank, and RST waters, respectively. In the AST and RST systems, predation of Cx. p. molestus by mud loaches at a release rate of 900 larvae/fish resulted in complete mosquito control from the first wk after treatment through the end of the survey period for 16 wk. The average mosquito reduction rates by temephos 20% EC and BTI treatments were 28.6 and 2.1% 2 wk post-treatment, respectively. Mud loaches merit further study as a potential biological control agent for the control of mosquito populations in light of global efforts to reduce the level of highly toxic synthetic insecticides in the aquatic environment.

The repellency of 104 plant essential oils to female Aedes aegypti was examined using a cage-distribution assay. Results were compared with those of the conventional mosquito repellent N,N-diethyl-m-toluamide (DEET). Coriander, oreganum, pennyroyal, lemoneucalyptus, and spearmint exhibited high repellency effect (>60 minutes at 50 mg/filter paper), followed by sage, leavander, tarragon, bergamot, and neroli oils which showed moderate effective (< 40 minutes at 50 mg/filter paper (5 cm diameter)). In the light of global efforts to reduce the level of highly toxic synthetic repellents, essential oils described merit further study as potential repellents for the control of mosquito populations.

The toxicity of Asarum heterotropoides root steam distillate compounds to third instar larvae of Culex pipiens pallens, Aedes aegypti, and Ochlerotatus togoi (formerly Aedes togoi) was examined using a direct contact mortality bioassay. Results were compared with those following the treatment with fenthion and temephos. A. heterotropoides root steam distillate exhibited good larvicidal activity (21.07-27.64 ppm), based on LC50 values. Potent activity was produced by safrole (LC50, 8.22-16.10 ppm), terpinolene (11.85-15.32 ppm), -terpinene (12.64-17.11 ppm), (–)-β-pinene (12.87-18.03 ppm), (+)-limonene (13.26-24.47 ppm), 3-carene (13.83-19.19 ppm), and α-phellandrene (13.84-23.08 ppm), although the larvicidal activity of these compounds was less toxic than either fenthion (LC50, 0.023-0.029) or temephos (0.016-0.020). A. heterotropoides root steam distillate and its constituents described merit further study as potential mosquito larvicides for protection from humans and domestic animals from vector-borne diseases and nuisance caused by mosquitoes.

본 연구에서는 환자들의 일상생활 동안 움직임 이상을 관찰하기 위한 인체동작 무선계측 기술을 개 발하였다. 기술개발에 사용한 도구는 버클리대학에서 개발한 MICA, TinyOS, nesC를 이용하여 무선신호 감지, 소프트웨어 플랫폼, 그리고 임베디드 프로그래밍을 위한 도구로 사용하였다. 실험을 위해 개발된 장비를 인체의 가슴부위에 부착하고 움직임 동작인 앉기, 서기, 눕기 데이터를 획득하여 PDA로 무선전 송하여 저장하고 처리하여 그래프로 보여준다. 보여진 결과는 인체동작을 구속이나 제한 없이 기록할 수 있게 된다. 본 연구의 결과는 환자의 움직임 이상과 일상생활동작을 관찰하는 데 사용될 수 있을 것 이다.