The chemical composition of 86 species of native plants in Korea, including plants to be afforestation, was analyzed. The chemical composition of the species analyzed was different. The species with the highest extractable content was Viburnum dilatatum (3.91%), and the species with the lowest extractable content was Ligustrum lucidum (0.11%). The lignin content ranged from 12 to 39%, with an average of 25%. The species with the highest lignin content was Chaenomeles lagenaria (39.37%). Hemicellulose content ranged from 18 to 52%, with the highest species being Thuja occidentalis (51.22%) and Eucommia ulmoides (48.84%). Cellulose content ranged from 25 to 58%, and the species with the highest content were Prunus serrulata (57.67%), Diospyros kaki (57.14%), Aesculus turbinata (53.29%), Albizia julibrissin (53.02%), and Zelkova serrata (52.29%). The chemical composition was different for each use taxon of 86 plant species. The lignin content was the highest in the fruit group and the lowest in the group other than recommended species for afforestation. Cellulose content was highest in non-reforestation-recommended tree species and lowest in fruit trees. In classification according to tree height, lignin content was higher in shrubs than in tall trees, and cellulose content was highest in tall trees. Between deciduous and evergreen trees, the lignin content was high in deciduous trees (26.46%), and the cellulose content was also high in deciduous trees (44.01%). As a result of analyzing the correlation between each compound, there was a difference. There tended to be a positive correlation between extractives and lignin content. There was a negative correlation between extractives and holocellulose content, hemicellulose and cellulose. The higher extract content affected the cellulose content much more than hemicellulose. Also, the higher the lignin content, the lower the cellulose content. The species with low lignin content and high cellulose content were Diospyros kaki and Prunus serrulata var. spontanea. This result is expected to be primary data for bioenergy, pulp industry and bioindustry.

나리(Lilium spp.)는 절화, 정원 식물 및 화분 식물과 같은 관상용 가치로 인해 가장 중요한 화훼 작물 중 하나이다. 나 리는 연작으로 인한 환경 스트레스에 민감하며, 환경 스트레 스의 원인 중 하나로는 염 스트레스가 있다. 본 연구는 분홍 색 오리엔탈 나리 'Medusa', 'Lake Carey', 'Ovada'의 생 육 시기별 염스트레스에 따른 표현형 및 색 관련 화합물 함 량 변화를 조사하였다. 염 처리는 생육 시기에 따라 다양한 처리기간(무처리, 발아 전, 발아 후, 전체 생육기간)에 주 1 회 염(8dS･m-1)처리를 실시하였다. 생육 시기별 염스트레스 에 의한 개화의 차이가 있었지만, 전체 생육기간동안 염 스 트레스 처리시 모든 품종에서 개화가 이루어지지 않았다. 염 스트레스 처리 시기에 따라 초장과 꽃의 크기가 감소율이 달 랐으며 'Medusa', 'Lake Carey'는 발아 후 염 처리에서 정 상 개화하였다. 또한, 염스트레스는 꽃과 같은 식물에서 생성 되는 색 관련 화합물인 페놀과 플라보노이드 함량도 시기별 로 차이가 있었다. 품종마다 차이는 있지만, 발아 전이 발아 후 염 처리보다 총 페놀과 총 플라보노이드 함량이 더 낮은 것을 확인하였다. 이 결과는 생육 시기에 따라 염 스트레스 에 의한 나리의 표현형과 화색 관련 화합물의 함량의 변화에 차이가 있었으며 생육초기 염스트레스에 의한 피해가 높은 것으로 판단된다.

The effect of the surrounding vegetation on the seed germination and growth of mountain-cultivated ginseng (MCG, Panax ginseng C.A. Meyer) was investigated. Seed germination rate and growth were tested for allelopathy effects on four forest tree species after treatment with fallen leaves and leaf extracts. In the case of soil treatment through fallen leaves and crushed leaves, the germination rate was lower in the Quercus myrsinifolia treatments, and the average germination time was slower when Chamaecyparis obtusa was treated. In the case of Pinus densiflora and Quercus variabilis, which are used in most of the MCG cultivation areas, they did not have a significant effect on seed germination. In the fallen leaves treatments, the stem showed a tendency to lengthen. The hot water extract treatment showed a higher germination percentage than the cold water extract treatment. The extract treatment showed a deficient germination percentage of some MCG seeds. However, in the case of the treatments except for this, the germination percentage was similar to that of the control treatment. However, the Mean Germination Time, germination rate, and germination value were faster and higher than the control treatment. As a result of calculating the allelopathic index (AI) of MCG according to the extract treatment of 4 species, most had a negative effect on germination, and P. densiflora and Q. variabilis extracts showed the most significant effect. The ginsenoside content was higher in the fallen leaves treatment than in the control. The above results will help select and manage MCG plantations.

농가에서 곤충자원을 활용한 치유농업프로그램의 개발 요구가 증가함에 따라 기존 곤충 돌보기 중심의 치유프로그램과 더불어 활용할 수 있는 야간 곤충채집 활동을 치유농업프로그램으로 개발하 고 시범 적용하였다. 야간곤충채집 활동은 대학생 9명에게 사전에 참여 동의를 획득하고, 전남대학교 학술림(장성)에서 1박 2일간 진행하였다. 18시부터 24시까지 야간 채집 활동과 익일 오전에는 채집한 곤충을 이용한 곤충 표본 제작 활동으로 프로그램을 구성하였다. 프로그램의 효과 분석을 위해 사전 (활동 전), 중간(채집활동 직후), 사후(표본제작 직후)에 뇌파, 맥파 검사 그리고 설문조사를 실시하였 다. 뇌파 분석 결과, 야간 채집활동 직후 뇌파의 기초율동이 향상(10.67→11.44)하였다(p<0.05). 요인 분석을 통한 스트레스 분석 결과, 내적 스트레스는 3.22(사전)→2.96(사후)로 감소(p<0.1)하였고, 문제 수행능력 관련 스트레스는 2.92(중간)→2.70(사후)로 감소하였다. 이러한 결과는 야간 채집 활동 속에 서 이용되는 근육의 움직임이 뇌 기능 향상과 스트레스 감소에 영향을 줄 것으로 생각된다. 참여자가 적은 연구의 한계를 극복하기 위해 향후 연령대별, 성별 등 다양한 참여자를 대상으로 추가적인 채집 프로그램의 개발 및 적용이 필요하다.

곤충생태원에서 진행되는 진로체험프로그램의 일환으로 ‘곤충 캠프, 파브르의 하루’ 프로그램을 개발하여 시범 적용하였다. 참가자는 전주시 지역에 거주하는 초등·중학생 16명이며, 야간시간(19:00-23:00)대에 활동이 이루어짐에 따라 사전에 보호자로부터 참여 동의를 획득하였다. 야외 활동은 각 개인별로 랜턴과 채집 도구를 지참하였으며, 4-5명씩 한 조를 이루어 담당 교사와 보조 교사가 동행하였다. 주된 활동은 야간등화, 통나무 무더 기, 야생의 서식지, 미리 설치한 곤충 트랩 속 곤충 찾기, 스탬프 미션활동 등으로 구성되었다. 실내활동으로는 곤충 동정하기, 곤충 관찰 수첩, 나만의 곤충도감 만들기 등을 진행하였다. 효과를 분석하기 위해서 프로그램이 진행되기 전과 끝난 후에 설문조사를 실시하였다. 분석 결과, 참여자의 평균 연령은 12.8세이며, 프로그램 참여를 통해 자아존중감의 향상(3.34점→3.61)과 진로인식 향상(3.40점→3.66)에 긍정적인 변화를 가져왔다(p<0.05). 야간에 이루어지는 활동으로 고려해야 할 사항이 많기는 하지만, 참여자의 재참여 의도가 90점으로 만족도가 높은 것으로 나타났기에, 향후 추가적인 연구 및 새로운 시도가 필요할 것으로 보인다.

왕담배나방은 기주범위가 넓은 다식성으로 토마토, 옥수수, 담배, 해바라기, 땅콩, 면화, 콩 등 다양한 작물에 피해를 주는 해충이며, 장거리 이동성 해충으로도 유명하다. 본 연구에서는 기존 자료를 바탕으로 월동번데기의 성충으로 우화모델(2종)를 작성하고 포장 실측자료와 비교하여 평가하였다. 월동 번데기는 휴면을 종료한 후 안점소실 과정을 거쳐 정상의 번데기로 이행되고 비로소 성충으로 우화하는 것으로 가정하였다. 첫 번째 모형(모 형 1)은 2단계 휴면후발육 우화모형으로 안점소실에 필요한 적산온도 59.9DD (발육영점온도 15.9℃)와 번데기 발육완료에 필요한 192.3DD (발육영점온도 10.2℃)로 구성하였다. 두 번째 모형(모형 2)은 온도자극 우화모형으 로 17.63℃의 온도자극 이후에 번데기 발육을 개시하는 모형이었다. 적산온도는 단순 평균온도법과 사인곡선법 으로 계산하여 비교하였다. 포장자료와 비교 결과 모형 1에 사인곡선법을 적용했을 때 실측치와 편차가 3일보다 작거나 차이가 없었다. 반면 사인곡선법을 적용한 모형 2는 3~6.5일의 편차가 있었다. 평균온도법을 적용한 경우 두 모형 모두 실측치와 편차가 증가하였다. 모형을 활용하여 예측 우화시기와 트랩유살자료를 비교하여 왕담배 나방의 비래 가능성에 대하여 고찰하였다.

지난 2022년 제주도 애월읍 일대에서 콩 해충으로 알려진 콩은무늬밤나방(Ctenoplusia agnata) 성충이 검거세 미밤나방(Agrotis ipsilon)의 성페로몬 트랩에 대량으로 포획되었다. 검거세미밤나방 트랩은 목적 해충에 대한 포획 효율을 조사하기 위해 세 구성 성분, (Z)-7-dodecenyl acetate, (Z)-9-tetradecenyl acetate를 3:1 비율로 고정하고 (Z)-11-hexadecenyl acetate를 0, 1, 6, 10, 15로 각각 비율을 달리한 미끼를 사용하였다. 각 조성별 콩은무늬밤나방 성충 포획수를 비교한 결과, (Z)-11-hexadecenyl acetate가 첨가되지 않은 트랩에서 주당 평균 약 17.96마리로, 가장 많은 수의 개체가 포획된 것으로 확인되었다. 반면, (Z)-11-hexadecenyl acetate가 가장 많이 함유된 트랩에서 주당 평균 약 2.5마리로 가장 적은 개체가 포획된 것으로 파악되었다. 이에 (Z)-11-hexadecenyl acetate의 비율이 증가할 수록, 포획되는 콩은무늬밤나방의 개체 수가 감소되는 것을 확인할 수 있었다. 검거세미밤나방 미끼의 주성분인 Z)-7-dodecenyl acetate는 기존의 콩은무늬밤나방 유인 성분 중 하나이기도 하여 해당 성분의 구성비가 유인에 영향을 미쳤다는 것을 예측할 수 있다. 추후에 해당 트랩들과 시판 중인 콩은무늬밤나방 성페로몬 트랩을 설치하 여 포획 양상을 비교할 필요성이 요구된다.

Background: The grading of Hanwoo (Korean native cattle) is based on four economic traits, and efforts have been continuously made to improve the genetic traits associated with these traits. There is a technology to predict the expected grade based on the 4 economic genetic SNP characteristics of Korean cattle calves using single nucleotide polymorphism (SNP) technology. Selection of highly proliferative, self-renewing, and differentiating satellite cells from cattle is a key technology in the cultured meat industry. Methods: We selected the Hanwoo with high and low-scored of genomic estimated breeding value (GEBV) by using the Hanwoo 50K SNP bead chip. We then isolated the bovine satellite cells from the chuck mass. We then conducted comparative analyses of cell proliferation, immunocytochemistry, qRT-PCR at short- and long-term culture. We also analyzed the differentiation capability at short term culture. Results: Our result showed that the proliferation was significantly high at High scored GEBV (Hs-GEBV) compared to Low scored GEBV (Ls-GEBV) at short- and long-term culture. The expression levels of Pax3 were significantly higher in Hs-GEBV bovine satellite cells at long-term culture. However, there were no significant differences in the expression levels of Pax7 between Hs- and Ls-GEBV bovine satellite cells at short- and long- term culture. The expression levels of MyoG and MyHC were significantly high at Ls-GEBV bovine satellite cells. Conclusions: Our results indicated that selection of bovine satellite cells by Hanwoo 50K SNP bead chip could be effective selection methods for massive producing of satellite cells.

With about 80% of the global economy expected to shift to the global market by 2030, exports of reverse direct purchase products, in which foreign consumers purchase products from online shopping malls in Korea, are growing 55% annually. As of 2021, sales of reverse direct purchases in South Korea increased 50.6% from the previous year, surpassing 40 million. In order for domestic SMEs(Small and medium sized enterprises) to enter overseas markets, it is important to come up with export strategies based on various market analysis information, but for domestic small and medium-sized sellers, entry barriers are high, such as lack of information on overseas markets and difficulty in selecting local preferred products and determining competitive sales prices. This study develops an AI-based product recommendation and sales price estimation model to collect and analyze global shopping malls and product trends to provide marketing information that presents promising and appropriate product sales prices to small and medium-sized sellers who have difficulty collecting global market information. The product recommendation model is based on the LTR (Learning To Rank) methodology. As a result of comparing performance with nDCG, the Pair-wise-based XGBoost-LambdaMART Model was measured to be excellent. The sales price estimation model uses a regression algorithm. According to the R-Squared value, the Light Gradient Boosting Machine performs best in this model.

In the era of the 4th Industrial Revolution, Logistic 4.0 using data-based technologies such as IoT, Bigdata, and AI is a keystone to logistics intelligence. In particular, the AI technology such as prognostics and health management for the maintenance of logistics facilities is being in the spotlight. In order to ensure the reliability of the facilities, Time-Based Maintenance (TBM) can be performed in every certain period of time, but this causes excessive maintenance costs and has limitations in preventing sudden failures and accidents. On the other hand, the predictive maintenance using AI fault diagnosis model can do not only overcome the limitation of TBM by automatically detecting abnormalities in logistics facilities, but also offer more advantages by predicting future failures and allowing proactive measures to ensure stable and reliable system management. In order to train and predict with AI machine learning model, data needs to be collected, processed, and analyzed. In this study, we have develop a system that utilizes an AI detection model that can detect abnormalities of logistics rotational equipment and diagnose their fault types. In the discussion, we will explain the entire experimental processes : experimental design, data collection procedure, signal processing methods, feature analysis methods, and the model development.

To improve the quality of jujube (Zizyphus jujuba Miller var. hoonensis), which is a fruit of health functional, the effect of polyphenol preparation treatment on the fruit characteristics of two cultivars (cv. Bokjo and cv. Sangwang) of jujube was investigated. There was no difference in the height and breast diameter of jujubes tested between the polyphenol treatments and non treatment. Jujube trees treated with polyphenol preparation produced significantly more fruit than untreated in both cultivars. In cvultivar of Bokjo, the polyphenol preparation treatment increased the fruit's fresh weight and dry weight more than two times, respectively, compared to the untreated treatment. Polyphenol preparation tr eatments also changed the leaf characteristics of jujube trees. In the polyphenol-treated trees, leaf thickness tended to be thickest at the top and thinnest at the bottom. Polyphenol preparation treated jujube trees showed no difference in chlorophyll content. Moisture content was slightly higher in the untreatment than in the treatments. Visually, the polyphenol preparation treatment had a dark green color. Jujubes treated with polyphenol preparations showed differences in polyphenol content in fruits. The polyphenol content in both peel and flesh of the treatments were much higher than that of the untreatment. Reducing sugar was contained more in the peel than in the flesh and was higher in the untreatment than in the polyphenol preparation treatments. Treatment with polyphenol preparation showed differences in fruit appearance. As described above, it was found that the treatment of polyphenol preparation changed the leaves, fruit shapes and components of jujube trees. In particular, jujubes treated with polyphenol preparations are expected to contribute significantly to eco-friendly and highly functional jujube cultivation, as they appear to produce many fruits and increase the content of polyphenols and sugars.

The 2007 Recommendation of the International Commission on Radiological Protection recommended the application of dose constraints to optimize radiation protection to resolve the inequity of exposure among radiation workers. The average annual occupational doses in Korean nuclear power plants (NPPs) are 0.3-0.8 mSv. These doses are much lower than the annual effective dose limit of 50 mSv for radiation workers stipulated by the Nuclear Safety Act. In addition, most NPP workers received less than 0.1 mSv per year. These doses are lower than the average annual occupational doses of 0.3- 0.8 mSv. Korean regulatory body conducted the study to legislate the dose constraints in the Korean regulatory system and determine dose constraints (draft) for radiation workers. The legislation of dose constraints would not greatly affect the radiation protection programs in Korean NPPs because most workers received very low doses. However, some workers received relatively higher doses than others. This study analyzed the occupational exposure conditions, such as exposure type and situation, in Korean NPPs. This study investigated the internal and external radiation doses and the radiation doses depending on the NPP operating conditions, including normal operation, planned maintenance, and intermediate maintenance, for the last ten years (2012-2021). As a result, most NPP workers received external exposure rather than internal exposure. Furthermore, most radiation exposures occurred during the planned maintenance period. The results of this study can be used for optimizing occupational doses in Korean NPPs.

The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

After the Fukushima nuclear accident in Japan in March 2011, many Koreans were concerned that products exposed to radioactive materials released from the nuclear power plant would be imported into Korea. Systematic radiation monitoring was required for food and daily necessities imported from the nuclear accident area. The need for a legal system to support systematic radiation monitoring was also demanded. The Act on Protective Action Guidelines against Radiation in the Natural Environment was enacted to resolve concerns regarding environmental radiation in Korea in July 2011. According to this law, radiation monitoring equipment has been installed and operated at major airports and ports nationwide. This paper aims to review the radiation monitoring system of the Korean government comprehensively. The legal system and the legal basis for radiation monitoring of imported cargo conducted by each department were investigated by analyzing the laws and regulations of radiation monitoring for the relevant cargo items. In addition, the current status of radiation monitoring by the government departments was examined to determine how radiation monitoring for imported cargo is performed within the legal system. The investigation of the current radiation monitoring system for imported cargo in Korea confirmed that radiation monitoring is conducted by classifying cargo items under the jurisdiction of each government department for all imported cargo. However, the reduction in efficiency of radiation monitoring of imported cargoes, unclear legal grounds for radiation monitoring of imported cargo by some departments, the occurrence of overlapping inspections by departments, and the difficult process of issuing the radiation test certificate required for customs clearance by the Korea Customs Service were also identified. As a result of the analysis, it was found that the current radiation monitoring system for imported cargo in Korea ought to be improved, taking into account efficiency, overlapping inspection, legal background, and the difficult process of issuing the certificates.

Metal waste generated during the dismantling of a nuclear power plant can be contaminated with radionuclides. In general, the internal structure is very complex. Thus, metal waste requires various cutting processes. When metal waste is cut, aerosols are generated. Aerosols are generally various particles of very small size suspended in the working area and remain for a considerable period. This may cause internal exposure of workers due to inhalation of radioactive aerosols generated when cutting radioactive metal waste. This study investigated various cutting processes and the size distribution of aerosols generated during the cutting process. The cutting process is normally classified into thermal cutting, mechanical cutting, and laser cutting. Thermal cutting includes plasma, flame, and oxygen cutting. Mechanical cutting includes mechanical saws, cutters, nibblers, and abrasive water jets. Stainless steel, carbon steel, aluminum, and copper are commonly used as cutting materials in nuclear power plants. The size of the aerosol generated from cutting showed a very diverse distribution depending on the cutting methods and cutting materials. In general, aerosol size is distributed within 0.1-1 μm. This size distribution is different from the 5 μm aerosol size suggested by the ICRP Publication 66 Lung model. These results show that it is necessary to conduct further studies on the size of aerosols generated when decommissioning nuclear power plants.

Currently, there are 25 nuclear power plants (NPPs) in operation in Korea, including 22 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Two NPPs, including Kori Unit 1 and Wolsong Unit 1, are permanently shut down and awaiting decommissioning. If Kori Unit 2, which is expected to be permanently shut down soon, is included, the number of decommissioning NPPs will be increased to three. Spent fuels (SFs) are continuously generated during the NPP operation, which are stored in an SF storage pool in NPPs to cool down the decay heat emitted from SFs. For safe NPP operation, SFs must be regarded as waste, and a disposal site must be selected to isolate SFs. However, an appropriate site has yet to be selected in Korea. SFs contain long-lived nuclides with a high specific activity. For disposal, it is important to characterize the nuclides in the fuels and delay the migration of the nuclides to the environment when SFs are placed in a future disposal facility. If the disposal container is broken, the nuclides in the fuels escape from the filling material, such as bentonite. These escaped nuclides are dissolved in groundwater and migrate to the surface of the earth. Thus, it is possible to assess the radiological impact, such as the exposure dose during and after the disposal, if the types and characteristics of nuclides in SFs are known. This study investigated the nuclides in SFs and identified exposure scenarios that may occur in the disposal process of SFs and migration characteristics when the nuclides leak into groundwater to propose a dose assessment methodology for workers and the public.