This study is to develop a radish skin peeling machine. Currently, radish peeling work is carried out manually, so the unit price is high due to the increase in labor cost, and problems related to hygiene continue to occur. To solve this problem, a field supply type radish skin peeling machine was designed and manufactured. The peeling machine is a principle in which the skin is removed by conveying the radish using a roller and passing through a blade assembly. In this paper, the design and analysis of the roller and blade part applied during the movement of the radish were carried out, and structurally stable results were obtained.

In the automotive industry, the platinum titanium anodes (Pt/Ti anode) play a significant role in electroplating of chromium coating on the vehicle’s shock absorber piston rod. In this paper, the structure of Pt/Ti anode was designed to obtain high quality and save time for the electroplating process. The structure of anode was designed in 2D & 3D modeling and analyzed by CATIA and ABAQUS program, respectively. The structural modeling of the anode was analyzed and carried out using a finite element method (FEM) by applied various loads. The manufacture anodes were installed in an electroplating bath in order to test the efficiency of chromium coating on shock absorber piston rod and safety of anode structure. The results presented indicate that the structural analysis is safe after applied loads due to the allowable stress is higher than the maximum equivalent stress about 4 times, and the chromium coating test obtained high-efficiency results.

The Carbon Fiber Reinforced Plastic(CFRP) is used in many industrial areas owing to its excellent specific strength. In order to be utilized for machine parts, it is needed to have the hole drilling machining that presents the excellent surface. For the excellent hole machining of CFRP, this study evaluated the cutting force and remaining burr in accordance with changes in temperature by cooling down the temperature of the machining part. It could be used for other machining of composite materials produced by laminating fabric.

Background: The wall squat exercise has been recommended for strengthening of the lower extremity muscles with maintaining lumbar lordosis. Although squat has been studied to be related to lower extremity extensor strength, the relationship between wall squat and lower extremity extensor strength unclear. Because squat and wall squat are biomechanically different, study on the relationship is needed. Objects: The purpose of this study was to determine the lower extremity extensor strength associated with wall squat performance. Methods: 74 healthy volunteers were recruited to participate in this study. The volunteers were measured hip and knee extensors strength and then performed wall squat exercise for maximum count. Results: We found significant relationships between wall squat performance and hip extensor strength normalized by body weight, knee extensor strength normalized by body weight and the composite value. In a regression analysis, hip extensor strength normalized by body weight explained 29% of the variation in wall squat performance in males and 35% in females. Conclusion: These results demonstrate that hip extensor strength normalized by body weight is critical to wall squat performance in both sexes.

The ship steering is a very important factor for safe operation. Recently, the ship is controlled in a space other than the wheelhouse through the wired controller. However, there has been a continuing need to improve the inconvenience of wired systems. In this study, a system to control the steering angle and throttle of ship by RF communication method was developed and applied to actual ship. Since the reliability is secured through the safety evaluation, the wireless steering system improves the convenience and economic efficiency of ship steering.

Carbon fiber reinforced plastics are typical examples of carbon fiber, which retain high strength and high strength at high temperatures. Also, it is applied to various fields, such as the structure of the aircraft, automobile, and the core industries. CFRP machining methods include machining tools such as cutting machining and laser machining. In this thesis, a tool dynamometer and tool microscope were used to measure the cutting characteristics of various cutting conditions and tool wear and tool wear. As a result, the cutting force of the new shape drill (lower shape drill) was measured higher than other tools, the amount of tool wear was the lowest, and it was found that a good machined surface was obtained.

Background: The wall squat is considered an effective exercise because it can reduce the knee load and prevent excessive lumbar movement. However, the relationship between wall squat performance and strength of knee extensors and hip extensors remained unclear. Objects: The purpose of this study was to compare the strengths of the knee extensors and hip extensors between groups with low and high wall squat performance. Method: Nineteen males (low performance group: 9 subjects, high performance group: 10 subjects) participated in this study and performed wall squats. The subjects who were performing less than 30% of the average wall squat count were classified into the low wall squat performance group (less than or equal to 4 times) and the subjects who performed more than 30% of the average wall squat count were classified into the high wall squat performance group (greater than or equal to 8 times). Knee extensor and hip extensor strength were measured with a strength measurement system. An independent t-test was used to compare the strengths of the knee extensors and hip extensors between the groups with low and high wall squat performance. Results: The ratios of knee extensor and hip extensor strength to bodyweight were greater in the high wall squat performance group than in the low wall squat performance group (knee extensors: p<.001; hip extensors: p=.03). In the high- and low-performance groups, the ratios of knee extensor strength to bodyweight were 42.74±5.72 and 30.76±8.54, respectively, and the ratios of hip extensor strength to bodyweight were 31.95±10.61 and 20.66±11.25, respectively. Conclusion: Our findings suggest that knee extensor and hip extensor strength are needed for high wall squat performance. Thus, exercise to increase the knee and hip extensors strength can be recommended to improve squat performance.

To obtain the immunomodulating polysaccharide from chaga mushroom (Inonotus obliquus sclerotia, IO), crude polysaccharide fractions (IO-M-CP and IO-CP, respectively) prepared from hot-water extract (IO-W) of I. obliquus by EtOH precipitation after MeOH reflux or not. After IO-W was re-dissolved in water followed by EtOH addition in the case without MeOH reflux, EtOH mixture was fractionated into EtOH-soluble (IO-E) and crude polysaccharide (IO-CP). In the meanwhile, MeOH-soluble fraction (IO-M) was separated from IO-W after MeOH reflux. The residue was dissolved in water and was added by EtOH, and then EtOH mixture was also fractionation into EtOH-soluble (IO-M-E) and crude polysaccharide (IO-M-CP). As a result of the macrophage stimulating activity of these fractions, IO-CP and IO-M-CP showed significantly increased cell proliferation and cytokines production than IO-W. Particularly, IO-M-CP promotes the production of IL-12 more than IO-CP. In the splenocytes proliferating activity and intestinal immune system modulating activity through Peyer’s patch, both of 2 crude polysaccharide fractions were significantly promoted in cell proliferation and cytokines production than IO-W, and IO-M-CP was more potent than IO-CP in IL-2 production from splenocytes and GM-CSF production (10 μg/mL) in Peyer’s patch cells. In addition, immunomodulating polysaccharide fractions (IO-M-CP and IO-CP) prepared from IO-W by EtOH precipitation with or without EtOH reflux showed no significant difference in the chemical composition and component sugar. These results suggested that MeOH reflux might exclude low-molecular weight materials from IO-W and consequently increase the immunomodulating activity of IO-M-CP. Therefore, it was confirmed that immunomodulation of polysaccharide prepared from hot-water extract of chaga mushroom was enhanced by fractionation including MeOH reflux and EtOH precipitation.

Background: The functioning of the serratus anterior (SA) muscle is essential to normal scapulohumeral rhythm during forward flexion (FF) of the shoulder. Also, SA weakness and overuse of the upper trapezius (UT) is observed in patients with shoulder dysfunction and trapezius myalgia. We designed a combination exercise involving FF and scapular protraction with resistance (CFFSP) to activate the SA muscle and to deactivate the UT muscle. Objects: The purpose of this study was to determine whether or not CFFSP would be more effective in activating the SA muscle than FF alone and FF with scapular protraction (FFP). Methods: Nineteen subjects (12 men and 7 women) participated in this study and performed FF, FFP, and CFFSP at 120°. Surface electromyography was applied to the SA, UT, and pectoralis major (PM) muscles, as was one-way analysis of variance (ANOVA) with repeated measures. Statistical significance was set at .05. Bonferroni adjustment was used to counteract the problem of multiple comparisons, with a statistical level of significance of .017 (.05/3). Results: A statistically significant difference was found in relation to the three positions for the SA muscle (p<.001) and the SA/UT ratio (p=.005) using ANOVA. Significantly different results, depending on the position, were also demonstrated using the Bonferroni post-hoc test for the SA muscle (FF=28.27±16.20, FFP=45.66±15.81, and CFFSP=62.4±27.21) and for the SA/UT ratio (FF=3.04±2.14, FFP=3.61±2.38, and CFFSP=5.95±3.01). Significant differences between the three positions was not found regarding the average amplitude of SA/PM muscle ratio (SA/PM: p=.060). Conclusion: We recommend the use of CFFSP to strengthen the SA muscle at 120°.

This study compared the effects of the initial head position (i.e., a HHP versus a relaxed head position) of subjects with and without a FHP on the thickness of the deep and superficial neck flexor muscles during CCF. The study recruited 6 subjects with a FHP and 10 subjects without a FHP. The subjects performed CCF in two different head positions: a HHP, with the head aligned so that the forehead and chin formed a horizontal line, and a relaxed head position (RHP), with the head aligned in a self-selected comfortable position. During the CCF exercise, the thickness of the longus colli (LCo) and the thickness of the sternocleidomastoid (SCM) were recorded using ultrasonography. The thickness of each muscle was measured by Image J software. The statistical analysis was performed with a two-way mixed-model analysis of variance. The thickness of the SCM differed significantly (p<.05) between the subjects with and without FHP. According to a post hoc independent t-test, the change in thickness of the SCM increased significantly during CCF in the subjects with FHP while adopting a HHP compared to that in the subjects without FHP. The change in thickness of the SCM was not significantly different between the two positions in subjects without FHP, and there was no significant change in thickness of the LCo muscle during the CCF exercise according to the initial position in both subjects with and without FHP. The results suggest that CCF should be performed in RHP to minimize contraction of the SCM in subjects with a FHP.

고준위폐기물 처분과 관련하여, 최근 저장소 형태의 처분장 개념에 대한 대안으로 검토되고 있는 시추 공 처분 개념에 대한 연구 현황을 정리하고 시추공 처분 개념의 국내 적용 가능성과 필요한 연구 항목에 대해 논의하였다. 현재 미국과 스웨덴을 중심으로 논의된 시추공 처분 개념은 심부시추공을 설치하여 지 하 3 - 5km 구간에 고준위폐기물을 처분하는 것을 의미하며, 현재까지의 연구 결과에 의하면 이 처분 개 념은 심부지하수의 층상구조, 작은 규모의 지표시설 등으로 인해 처분 및 비용 효율이 클 것으로 예상된 다. 이에 반해 국내에는 축적된 심부 지질 자료가 없어 적용 가능성에 대한 논의할 여지가 없다. 이에 저 장소 형태의 처분장 개념에 대한 대안으로 시추공 처분 개념을 검토하기 위해서는 향후 심지층 자료 확 보, 공학적 방벽 연구, 수치모의모델 개발, 처분 기술 개발 등의 연구가 필요하다.