The purpose of flow analysis is to develop a simple CFD analysis model to develop a heat transfer analysis model including transient heat transfer characteristics, especially phase change, of thin film evaporators. The simple analytical model focuses on the evaporation phase change. To reduce the computational cost, the shape was simplified to two dimensions, and the simulation time was set short with a focus on simulating the phase change phenomenon. In the future, based on this analysis model, we will develop an analysis model for simulating not only vaporization but also liquefaction, that is, transient distillation phenomenon, according to the shape of the thin film distillation device.

In this paper, durability verification of forged wheels for automobiles were performed using the finite element method for bending fatigue analysis and impact analysis. In addition, the durability analysis environment of forged wheels was implemented. By analyzing the stress distribution on the surface of the forged wheel, the area with a high possibility of breakage was identified and improved. The durability analysis of the initial model forged wheel was performed by bending fatigue analysis and impact analysis, The stress distribution of the forged wheel surface was analyzed through the analysis results of the initial model. and the spokes, flanges, hubs, and rear parts are less likely to be damaged were cut to reduce the weight by about 10%, and the reliability of the improved model was confirmed.

Recently, the expansion of the travel market and the increase in demand for leisure sports because of the weekend travel culture following the implementation of the five-day week system, leisure activities such as fields related to hobbies are becoming a major part. In this study, floating body analysis was performed according to the wave direction of the hull to analyze the effect of the wave cycle of the leisure boat. The research target boat is a 24ft-class leisure boat with a capacity of up to 6 passengers and operating at a maximum of 25 knots. Existing boats reduce the stern trim by installing interceptors, but in this study, they were not installed in order to evaluate the effect of waves. Floating body analysis was performed to evaluate the effect of waves, and the conditions necessary for the analysis were set based on the shipping environment, and the effect of the wave cycle was analyzed. this study verified the stability and stability of the leisure boat about waves, and Based on the result data, propose a management measure to efficiently reorganize the internal structural reinforcement.

In recent, fiber-reinforced composites have been widely used in many fields because of their excellent performance. In order to manufacture lightweight, high-performance, and inexpensive composites various laminated structures were designed. Six types of hybrid composites were fabricated with glass/basalt/aramid fibers by VARTM process. The effect of the laminated structure on the mechanical properties of composites was investigated through impact energy, tensile and bending strength. Compared to other conditions more higher impact energy was obtained when the aramid fibers were in the center position and more higher bending strength was obtained when the fibers are laminated in the order of increasing bending performance from top to bottom. The laminate structure did not affect tensile strength which mainly depends on the property of fibers.

When operating at high speed on a vessel, a high-speed planing hull occurs nonlinear movements such as stern trim and large sprays. This phenomenon results in the hindrance of stability, embarkation and mission performance. Excessive stern trim during the slides decreases propulsion efficiency and visibility of helmsman due to porpoising and changing the attack angle of the fluid flowing into the propeller. To improve these problems, an outboard floating plate is installed on the cavitation plate to greatly suppress or eliminate the porpoising phenomenon. In this study, to analyze the performance of the floating plate mounted on the outboard engine, numerical analysis was carried out to investigate the resistance applied to the floating plate and the lift generated according to the change of the angle of attack and the flow velocity. The reliability of the floating plate mounted on the outboard engine was verified by applying the floating plate according to the speed and the angle of attack.

Various electronic control parts and devices installed in electric vehicles have greatly improved the convenience of occupants, but electromagnetic waves emitted from electronic devices have greatly increased concerns about malfunctions, deterioration of performance, safety accidents, etc. There are two models of analysis. Case A is symmetrical about one axis of rotation. Case B has two axes of rotation. In this study, a flow analysis was conducted to find excellent flow conditions in the mixing process to develop a paint with excellent electromagnetic shielding and thermal insulation performance. The results of the flow analysis are reflected in manufacturing specifications and are intended to be used to develop high-quality systems.

The Carbon Fiber Reinforced Plastic(CFRP) is used in many industrial areas owing to its excellent specific strength. In order to be utilized for machine parts, it is needed to have the hole drilling machining that presents the excellent surface. For the excellent hole machining of CFRP, this study evaluated the cutting force and remaining burr in accordance with changes in temperature by cooling down the temperature of the machining part. It could be used for other machining of composite materials produced by laminating fabric.

This study was successfully achieved out the optimized system for dispersing and mixing condition of resin liquid. The flow analysis was simulated according to the shape of the impeller and the stirring tank using ANSYS software and optimized in advanced design. As a result, it was confirmed that the shape and double number of the impeller on the flow field are influenced better effects in a range of mixing and diffusion areas comparing to single number of impeller. It was considered that stirring was performed more quickly and efficiently under the condition of double numbers and saw tooth type impeller. This result can be applied practically for the mixing tank in the industrial application and avaliable used to make a new system for painting equipment.

먹거리의 국제화에 따라 식품이나 식품원료의 수입이 급증하고 식품규제에 대하여 국제적 조율이 강조되는 등 먹거리를 둘러싼 환경이 크게 변하고 있다. 식품산업도 고품질을 유지하면서 안전성을 확보하는 것이 시급해졌는데 안전성 확보에는 미생물학적, 물리적 위해(이물질 혼입 등)와 함께 식품첨가물, 잔류농약 등의 화학적 위해분석을 빠뜨릴 수 없다. 이들 먹거리의 안전성평가기술의 대표적인 것이 HACCP이다. HACCP절차는 식품가공과 식품저장의 모든 형태에서 식품안전을 확인하는 필수요소이다. 전통적인 최종제품검사가 품질결함을 찾아내기 위한 것이라면 HACCP은 식품의 안전성 결함을 방지하기 위하여 제품계통이나 가공인자 그리고 실제운전에 규제사항을 설계하는 것이다. 본보는 HACCP시스템에 필요한 기기를 중점적으로 요약한 것이다.

시판 간장이 유통되는 동안에 가스가 형성되어 품질을 저하시키는 문제가 발생되고 있어서 가스가 형성된 시판간장에서 효모를 분리하여 동정하였다. 가스가 발생된 시판간장에서 6개의 효모(SS-1, SS-2, SS-3, SS-4, SP-1, SP-2)를 분리하였는데, 그 중 3가지(SS-1, SS-2, SP-1) 효모는 막을 형성하였고, 나머지 (SS-3, SS-4, SP-2) 효모는 막을 형성하지 않았다. 분리된 효모중 SS-3를 제외하고는 간장에서 가스를 형성하였다. SS-3균주는 발효력이 약한 효모인 것 같다. SS-1, SS-2, SP-1는 Zygosaccharomyces rouxii var. halomembrains(산막효모)로 SS-4, SP-2는 Zygosaccharomyces rouxii(비산막 효모)로 동정되었고, SS-3는 Candida globosa(비산막 효모)로 동정되었다.

대추의 연화현상을 연구하고자 건조중에 세포벽 구성성분의 변화를 조사하였다. 알코올 불용성 물질, 세포벽 및 수용성 물질의 함량은 건조 6일까지는 변화가 없었으나 건조 9일째에는 알코올 불용성 물질과 세포벽은 감소하였으나 수용성 물질은 증가하였다. 펙틴질과 헤미셀룰로오스는 건조 6일까지는 거의 변화가 없었으나 건조 P일째에는 펙틴질과 알칼리 가용성 헤미셀룰로오스가 감소한 반면 산가용성 헤미셀룰로오스는 증가하였다. 셀룰로오스는 건조 중에 증가하였다.

This study was investigated to viscosity, color, chemical properties, and lipid and fatty acid composition for examination of physical and chemical characteristics of sesame oils. Yield of sesame oil was higher in Ansan sesame than that of Chinese and Dambaek sesame. Viscosity of sesame oils was higher than that of shame oils from Dambaek and Chinese sesame, but turbidity and sedimentation rate were higher in Dambaek's sesame oil than those of Ansan's and Chinese sesame oils. In the acid value, saponification value and iodine value of sesame oils, and chemical characteristics of Dambaek's sesame oil were better than those of the others. The neutral, glycolipid and phosholipid contents of sesame oils were 91.1∼92.1, 2.5∼3.5 and 5.5∼6.4%, respectively. The major fatty acids of sesame oils were oleic, linoleic palmitic and stearic acid. The content of oleic acid was higher in Dambaek's and Ansan's sesame oil than that of Chinese sesame oil, and the content of linoleic acid was higher in Chinese sesame oil than the others. The fatty acid composition of neutral lipid, glycolipid and phospholipid were similar to those of total lipid. The ratio of unsaturated fatty acid and saturated fatty acid was higher in Korean sesame oils than those in Chinese sesame oil. The mineral(Mg, Cu, Fe, In, Al, Mn) content of Korean sesame oils was higher than that of Chinese sesame oil. and heavy metals(Cu, Ag, Pb, Cd, As) were not detected.