The fundamental characteristics of groundwater colloids, such as composition, concentration, size, and stability, were analyzed using granitic groundwater samples taken from the KAERI Underground Research Tunnel (KURT) site by such analytical methods as inductively coupled plasma-mass spectrometry, field emission-transmission electron microscopy, a liquid chromatography-organic carbon detector, and dynamic light scattering technique. The results show that the KURT groundwater colloids are mainly composed of clay minerals, calcite, metal (Fe) oxide, and organic matter. The size and concentration of the groundwater colloids were 10–250 nm and 33–64 μg·L−1, respectively. These values are similar to those from other studies performed in granitic groundwater. The groundwater colloids were found to be moderately stable under the groundwater conditions of the KURT site. Consequently, the groundwater colloids in the fractured granite system of the KURT site can form stable radiocolloids and increase the mobility of radionuclides if they associate with radionuclides released from a radioactive waste repository. The results provide basic data for evaluating the effects of groundwater colloids on radionuclide migration in fractured granite rock, which is necessary for the safety assessment of a high-level radioactive waste repository.

In the majority of countries, the upper limit of buffer temperature in a repository is set to below 100℃ due to the possible illitization. This smectite-to-illite transformation is expected to be detrimental to the swelling functions of the buffer. However, if the upper limit is increased while preventing illitization, the disposal density and cost-effectiveness for the repository will dramatically increase. Thus, understanding the characteristics and creating a database related to the buffer under the elevated temperature conditions is crucial. In this study, a strategy to investigate the bentonite found in Korea under the elevated temperatures from a mineral transformation and radionuclides retardation perspective was proposed. Certain long-term hydrothermal reactions generated the bentonite samples that were utilized for the investigation of their mineral transformation and radionuclide retardation characteristics. The bentonite samples are expected to be studied using in-situ synchrotron-based X-Ray Diffraction (XRD) technique to determine the smectite-to-illite transformation. Simultaneously, the ‘high-temperature and high-pressure mineral alteration measurement system’ based on the Diamond Anvil Cell (DAC) will control and provide the elevated temperature and pressure conditions during the measurements. The kinetic models, including the Huang and Cuadros model, are expected to predict the time and manner in which the illitization will become detrimental to the performance and safety of the repository. The sorption reactions planned for the bentonite samples to evaluate the effects on retardation will provide the information required to expand the current knowledge of repository optimization.

Anionic radionuclides pose one of the highest risks to the long-term safety assessments of disposal repositories. Therefore, techniques to immobilize and separate such anionic radionuclides are of crucial importance from the viewpoints of safety and waste volume reduction. The main objective of this study is to design a separator with minimum pressure disturbance, based on the concept of a conventional cyclone separator. We hypothesize that the anionic radionuclides can be immobilized onto a nanomaterial-based substrate and that the particles generated in the process can flow via water. These particles are denser than water; hence, they can be trapped within the cyclone-type separator because of its design. We conducted particle tracking analysis using computational fluid dynamics (CFD) for the conventional cyclone separator and studied the effects due to the morphology of the separator. The proposed sandglass-like design of the separator shows promising results (i.e., only one out of 10,000 particles escaped to the outlet from the separation zone). To validate the design, we manufactured a laboratory-scale prototype separator and tested it for iron particles; the efficiency was ca. 99%. Furthermore, using an additional magnetic effect with the separator, we could effectively separate particles with ~100% efficiency. The proposed sandglass-like separator can thus be used for effective separation and recovery of immobilized anionic radionuclides.

스트론튬(90Sr)과 니켈(59Ni)은 처분안전성평가에서 중요하게 다루는 핵종들이다. 지하에서 방사성핵종의 이동을 저지하기 위한 다양한 시도가 이루어지고 있는데, 처분시스템에서 용기와 부식반응으로 생기는 광물들 중에 핵종들과 반응성이 뛰어난 광물들이 존재하는 것이 알려졌다. 이들 중에서 철-황화합광물인 맥키나와이트(FeS)를 선정하여 스트론튬, 니켈과 수착 실험을 하였다. 심부지하에서 환원 알카리 환경을 고려하여, pH 8 ~ 12까지 조건에서 pH에 따른 수착영향을 살펴보았다. 실험결과, 스트론튬은 낮은 알카리영역에서 수착능이 저조하였지만, 니켈은 전 실험영역에서 높은 수착능을 보였다. 또, 두 핵종 모두 알카리 조건에서 pH가 증가할수록 수착량(Kd)이 증가하였는데, 이는 pH가 증가하면서 풍부해진 OH‐이온이 광 물표면에 수소나 양이온과 결합해 탈착하면서 광물표면에 전기음성도가 증가해 양이온인 스트론튬과 니켈을 전기적 인력으로 끌어당기기 때문으로 여겨진다.

Nitrogen (N) loading from domestic, agricultural and industrial sources can lead to excessive growth of macrophytes or phytoplankton in aquatic environment. Many studies have used nitrogen stable isotope ratios to identify anthropogenic nitrogen in aquatic systems as a useful method for studying nitrogen cycle. In this study to evaluate the precision and accuracy of Kjeldahl processes, two reference materials (IAEA-NO-3, N-1) were analyzed repeatedly. Measured the δ¹⁵N-NO₃and δ¹⁵N-NH₄values of IAEA-NO-3 and IAEA-N-1 were 4.7±0.2‰ and 0.4±0.3‰, respectively, which are within recommended values of analytical uncertainties. Also, we investigated spatial patterns of δ¹⁵N-NO₃and δ¹⁵N-NH₄in effluent plumes from a waste water treatment plant in Han River, Korea. δ¹⁵N-NO₃and δ¹⁵N-NH₄values are enriched at downstream areas of water treatment plant suggesting that dissolved nitrogen in effluent plumes should be one of the main N sources in those areas. The current study clarifies the reliability of Kjeldahl analytical method and the usefulness of stable isotopic techniques to trace the contamination source of dissolved nitrogen such as nitrate and ammonia.

생활주변방사선안전관리법 도입에 따라 재활용하지 못하는 공정부산물의 안전관리를 위해서는 방사선적 안전성 확보가 필 수적이다. 이를 위해서 처분대상 공정부산물 특성화 자료 수집 및 분석, 처분방법과 처분시설의 조사 및 분석, 처분시설의 운 영으로 인한 방사선적 안전성평가 방법론 정립과 도구 확보, 주요 입력자료들의 안전성에 미치는 영향 파악 등이 필요하다. 이를 통하여 매립과 같은 참조 처분방법을 선정하고 피폭선량과 인체보건 리스크 평가를 통하여 공정부산물 처분에 따른 방 사선적 안전성 확보를 위한 절차 및 기준마련을 위한 기술적 근거를 확보할 필요가 있다. 본 연구에서는 공정부산물 처분방 법과 공정부산물 처분시설에 대한 국내외 현황 조사 및 분석과 국내외 주요 산업별 처분대상 공정부산물 특성화 자료 수집 및 분석을 수행하였다. 이를 바탕으로 주요 공정부산물 특성에 따른 관리방안과 매립 처분시설에 대한 개념설계를 제안하였 다. 또한, 공정부산물 처분시 대기확산에 의한 방사성핵종의 전이경로와 침출수 유출로 인한 방사성핵종의 전이경로 파악을 수행하고 적절한 코드를 선정하여 예제 평가를 수행함으로써 코드의 유용성을 확인하였다. 그리고 국내 대표 공정부산물인 비산재, 인산석고, 레드머드 특성화 자료를 이용하여 공정부산물 처분시 피폭선량 및 초과 암 리스크를 평가하고 분석하였 다. 개념적 설계 예제에 대한 방사선적 안전성 평가 결과에 의하면 공정부산물 처분시 피폭선량 및 초과 암 리스크는 매우 낮 은 값을 가지며 우려할 만한 방사선적 영향을 보이지는 않는다. 연구결과는 향후 생활방사선 안전관리를 위한 규제기술 개 발에 활용 가능할 뿐만 아니라 생활주변방사선안전관리법 이행기술 기반 구축에 기여할 수 있을 것이다.