Paecilomyces tenuipes (P. tenuipes) is a fungus cultivated artificially by South Korean researchers, utilizing rice bran as its substrate. The increased demand for this fungus has not been met with successful cultivation methods for fruiting body production in natural environments. Therefore, we tested the effect on the growth of P. tenuipes using a Solid media based on pests. In this results, the Solid media based on M.alternatus was effective in increasing the growth of P. tenuipes and the content of cordycepin. Moreover, we confirmed the conditions for manufacturing a Solid media based on M.alternatus for P. tenuipes growth. We suggested that the growth-promoting compounds offers valuable insights for optimizing fungal cultivation conditions, thereby enhancing productivity and contributing to a broader understanding of fungal physiology in varying nutritional environments.

수입된 관상용 부추속 종과 야생 부추속 종을 교배하고 새로운 품종을 얻기 위해서는 한국에 자생하는 부추속 종의 개화생리의 이해가 필요하다. 본 연구는 일장처리를 통해 자생 부추속 4종의 화아발달 및 생육특성을 알아보고자 수행하였다. 실험은 국립수목원 유용식물증식센터의 Phyto-Garden System에서 실시되었으며, 온도는 25℃, 습도는 70%로 유지 되었다. 꽃눈이 각 1개씩 출현한 개체를 이용하여, 2019년 6월 28일에 장일(LD, 16hours), 단일(SD, 9hours), 외부환경으로 나누어 실험하였다. LD와 SD처리에서 8:00~17:00(9h)까지 는 296±13μmol･m-2 ･s-1의 광도 하에서 실험하였다. 이후의 추가되는 시간은 형광등을 이용해 약 5μmol･m-2 ･s-1로 일장연장 (day extension, DE)처리를 하였다. 생육조사는 생장특성으로 초장, 초폭, 엽수, 엽장을, 개화특성으로는 꽃의 수와 개화소 요일수를 조사하였다. 실험결과, 한라부추의 단일처리에서 엽수를 제외한 초장, 초폭, 엽장, 엽폭이 장일처리 및 외부환경 보다 높게 측정되어, 4종의 부추속 식물 중 한라부추가 추대 이후 단일처리에서 가장 생장이 왕성한 것으로 확인하였다. 또한, 단일처리에서 개화소요일수는 각각 강부추 51.8일, 둥근 산부추 46.5일, 선부추 43.7일 그리고, 한라부추 52일로 나타 났다. 반면 장일처리의 개체들은 실험종료일까지 전혀 개화하지 않았다. 외부 환경조건에서는 부추속 4종이 평균적으로 97.2일째에 개화하였다. 본 실험은 자생 부추속 4종이 단일처리에서 외부환경보다 화아발달이 촉진되는 결과를 나타냈다.

This study was conducted to evaluate the efficacy of mulberry cake mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry cake to oak fermented sawdust and mulberry fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 3, 5% and 10% of mulberry cake, the cumulative proportion of larvae over 2.5g was 92.9% at 65 days, 90.8% at 55 days, and 96.3% at 45 days after rearing at 25±1℃, respectively. When fed mulberry fermented sawdust with 3%, 5% and 10% of mulberry cake, the cumulative proportion of larvae over 2.5g was 86.2% at 85 days, 90.7% at 75 days, and 91.5% at 75 days after rearing at 25±1℃, respectively.

This study was conducted to evaluate the efficacy of mulberry leaf mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry leaves to oak fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 5%, 10% and 20% of mulberry leaves, the cumulative proportion of larvae over 2.5g was 93.1% at 65 days, 95.6% at 55 days, and 93.9% at 55 days after rearing at 25±1℃, respectively. Also, heavy metals were not detected in larvae of P. brevitarsis fed on mulberry leaves.

Insect killing fungus Beauveria bassiana has been widely studied as a biological control agent. However, many studies have been focused on lab or field-based management. Herein this work, comparison of three B. bassiana strains was investigated under a molecular level. The whole genome sequences of ERL836, JEF-007 were analyzed by PacBio (35.5 Mb of ERL836 and 36.5 Mb of JEF-007) and ARSEF2860 referenced from GenBank (33.7 Mb). To compare the three strains, virulence, thermotolerance and chemical resistance were assayed. The transcriptomes of non-infecting B. bassiana and infecting B. bassiana against western flower thrips were analyzed using RNA-seq. This work can provide that genome features, functions, morphology and gene expression could be different under the molecular level, even if in the same species.

Japanese pine sawyer, Monochamus alternatus, is the main pest that mediates pine wilt nematode, Bursaphelenchus xylophilus, that causes serious damage to pine forests. In this study, we studied the strategy to control M. alternatus using entomopathogenic fungi. The fungi were collected from soil by an insect-baiting method and two fungal isolates (Metarhizium anisopliae JEF-197 and JEF-279) showed high virulence against M. alternatus. The Metarhizium isolates were evaluated for insecticidal activity against M. alternatus by spray treatment on live pine trees and wintering trees, and the M. anisopliae JEF-197 showed high insecticidal activity. In addition, the interaction of fungi and M. alternatus were analyzed by RNA-seq. This result can contribute to the development of insect control agents using entomopathogenic fungi.

The serious emergence of chemical-mediated residual toxicity and insect resistance have been enforced the regulation of synthetic pesticides. Future decisions to select more realistic control options probably depend on the speed of technological development in chemical and biological pesticides. Now, a strategic collaboration between synthetic pesticides and biopesticides has been progressed, such as distribution and R&D in collaboration and M&A for obtaining microbial resources. Recently registered microbial pesticides are entomopathogenic fungi in pest management. A concept of e-biopesticide could be properly combined with digital agriculture and accelerate the use of biological control agents in the future farming.

This paper examines a simple one-step and catalyst-free method for synthesizing carbon nanoparticles from aliphatic alcohols and n-hexane with linear molecule formations by using a stable solution plasma process with a bipolar pulse and an external resistor. When the external resistor is adopted, it is observed that the current spikes are dramatically decreased, which induced production of a more stable discharge. Six aliphatic linear alcohols (methanol- hexanol) containing carbon with oxygen sources are studied as possible precursors for the massive production of carbon nanoparticles. Additional study is also carried out with the use of n-hexane containing many carbons without an oxygen source in order to enhance the formation of carbon nanoparticles and to eliminate unwanted oxygen effects. The obtained carbon nanoparticles are characterized with field emission-scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The results show that with increasing carbon ratios in alcohol content, the synthesis rate of carbon nanoparticles is increased, whereas the size of the carbon nanoparticles is decreased. Moreover, the degree of graphitization of the carbon nanoparticles synthesized from 1-hexanol and n-hexane with a high carbon (C)/oxygen (O) ratio and low or no oxygen is observed to be greater than that of the carbon nanoparticles synthesized from the corresponding materials with a low C/O ratio.

This study was conducted to evaluate the time required to sell Protaetia brevitarsis larvae when larvae fed on three kinds of fermented berries sawdust, such as mulberry, raspberry, and blueberry. The first instar larvae were reared in a plastic container(543x363x188mm) with designated feeds, and investigated the cumulative proportion of larvae more than 2.5g at rearing room regulated at 25±1℃ with 50~60% under 16:8(L:D). When we reared larvae for about 45 days with fermented blueberry sawdust, the cumulative proportion of larvae with more than 2.5g was over 70%. It was about 40 days shorter than fermented oak sawdust. For each group, the average survival rates of larvae at the possible time for sale were 72~93%.

In order to develop the D. adamsi breeding technique that is highly likely to be used as an emotional pet insect, the results of the D. adamsi was collected in the large exhibition Jang Tae-san in Daejeon to the indoor breeding began to spawn after 10 days after the training, the egg laying period was 33.6 days, the average number of spawn per female was 27.7, and the period was 11.8 days. D. adamsi larvae bred with food of oak-boiled molted two times, the duration of 1st larvae development was 11.8 days, 2nd larvae 14.5 days, and the third larvae was 29.4, and the larvae were used to build houses using Masato(soil) and in the pupae, and then in April of the following year. D. adamsi has a characteristic to build a house with fallen leaves and spawn one or two eggs in the fallen leaves, and the results of the spawn mat test using fallen leaves, leaf mold and a sawdust, etc., and the number of spawn was high in the Masato was spread about 3 ~ 5cm, and a fallen leaves on a 10 cm or so, and the growth and survival rate of the larvae were also high. Larvae breeding density was 2 ~ 3 ℓ in the container size to raise the object was normal growth, the higher the density mortality was high and the growth was sluggish. Larvae feeding conditions were normally developed in dry fallen leaves and fermented fallen leaves, compared to the sterile fallen leaves, oak sawdust, sterile fallen leaves and oak sawdust was abnormal, the mortality rate was higher than 50%.

Japanese pine sawyer beetle, Monochamus alternatus Hope (Coleoptera: Cerambycidae) is considered as a serious pest in pine trees. To develop an eco-friendly strategy to manage this forest insect, we collected entomopathogenic fungi from Korean soil and assessed their virulence against the adults of the insect in laboratory conditions. As a result, two isolates with conidial suspension (1.0×107conidia/ml), showed 87% and 90% mortality 12 days after fungal treatment, respectively. We assessed the potential of the fungi-derived destruxin and protease as additives to the fungal isolates, and they showed insecticidal activity via feeding and spraying treatments. Finally, we produced fungal conidia in massive solid cultures and formulated wettable powders, and now studying optimal conditions of oil-based formulation with two isolates. Based on these results, we are evaluating the control efficacy of the fungal agents against M. alternatus in field conditions.

Roller Compacted Concrete Pavement (RCCP) is placed by roller compaction of a mixture of less cement and unit water content and more aggregates and provides excellent early strength development with the help of interlocking of aggregates and hydration. The unit cement content of RCC pavements accounts for 85% of conventional pavements, with low drying shrinkage. As low drying shrinkage leads to smaller crack widths than ordinary concrete, RCC pavements can help elevate reflecting crack resistance if applied to a base layer of a composite pavement system. In a composite pavement with an asphalt surface laid over a concrete base, pavement temperature change is important in predicting pavement performance. As movement of the lower concrete layer is determined by temperature depending on pavement depth, temperature data of the pavement structure serves as an important parameter to prevent and control reflecting crack. Among the causes of reflecting crack, horizontal behavior of the lower concrete layer and curling-caused vertical behavior of joints/cracks are considered closely related to temperature change characteristics of the lower concrete course (Baek, 2010). Previous studies at home and abroad about reflecting crack have focused on pavement behavior depending on daily and yearly in-service temperature changes of a composite pavement (Manuel, 2005). Until now, however, studies have not been conducted on initial temperature characteristics of concrete in composite pavements where asphalt surface is placed over an RCC base. Annual temperature changes of in-service concrete pavements go up to 60 ℃, and those of asphalt overlays become around the twice at 110 ℃. This study evaluated initial crack behavior of composite pavement by investigating pavement temperature by depth of an RCC base and analyzing joint movement depending on change to temperatures of continuously jointed pavements. Findings from the study suggest that in composite pavements and asphalt overlays, time of laying asphalt has an important impact on crack behavior and reflecting crack.