Anti-reflection thin films are fabricated on glass substrates using the screen printing method. Tetra ethyl silicate(TEOS) and methyl tri methoxy silane(MTMS) are used as starting materials and buthyl carbitol acetate(BCA) and buthyl cellusolve(BC) are mixed to improve the viscosity of the solution. Anti-reflection thin films are fabricated according to the number of the screen mesh and the characteristics improve as the mesh size increases. The transmittance and reflectance of the coated thin film using 325 mesh are about 94 % and 0.43 % in the visible wavelength. The thickness and refractive index of the AR thin film are 107 nm and n = 1.26, respectively.

Recently, airborne fungi as indoor air pollutant have attention due to its health related problems such as asthma, rhinitis, sinusitis, atopy, pneumonia, building syndrome and etc.. However, it is considered that current laws and policies in Korea are not efficient to deal with these problems. Our research investigated influential factors and species distribution on the basis of previous research related to airborne fungi issue conduced in Korea by applying meta analysis technique. We selected 15 articles containing variables affecting fungi population such as outdoor air characteristics, temperature, location, and ventilation to evaluate significant factors. It was confirmed that airborne fungi level has partial correlation to those factors despite of limited sample size. It is required that the consistent and systematic research effort should be extended to characterize health effect caused by these fungi as well as to control them efficiently.

중재적 시술은 매우 낮은 관전류를 사용함에도 불구하고 장시간 방사선 피폭으로 인해 시술자뿐만 아니 라 환자의 방사선 노출에 의한 위험도가 크다. 이에 본 연구의 목적은 뇌혈관 중재적 시술 시 시술자가 받는 선량을 측정하고 의료 방사선으로부터의 노출을 효율적으로 차단할 수 있는 차폐물질과 차폐방식을 찾아 시술자가 받는 피폭선량을 화질에 영향을 미치지 않는 범위 내에서 최소화 할 수 있는 방법을 찾는 것이다. 결과적으로, Nano Tungsten 물질로 새롭게 고안한 차폐방식을 사용하였을 때 시술자 측에서 평균 7.95% 선 량이 감소되는 것을 확인할 수 있었다. 또한, 본 연구에서 고안한 차폐체를 사용하였을 때 PSNR의 결과는 38.44 dB로 측정되었으며 이는 Nano Tungsten이 영상의 화질에 큰 영향을 끼치지 않는 것으로 확인할 수 있 었다. 결론적으로, Nano Tungsten 차폐물질은 화질에 영향을 미치지 않는 범위 내에서 시술자뿐만 아니라 환 자의 선량을 상당히 줄일 수 있음을 알 수 있었다. 위의 물질을 사용할 경우 최근 차폐물질의 이슈로 부각되 고 있는 인체 및 환경의 유해성 및 경제성에 관련한 문제점들을 해결할 수 있을 것으로 기대된다.

The purpose of development new variety ‘Miho’ (Hordeum vulgare L.) is a favorite with livestock feed and develop varieties resistant to disease and lodging. ‘Miho’ was carrying the growth habit of group Ⅲ, green and mid-wide leaf. Awn that are related to preference of livestock is a semi-smooth awn. This cultivar had 96cm of culm length, 650 of spikes per m2. Heading date of ‘Miho’ is April 27, and maturing dates on May 30, which were later than cultivar ‘Youngyang’. It also showed strong winter hardiness, and similar resistance to shattering and BaYMV compared with those of check one. The best thing among the traits of one is a new good quality with the plant green at the latter growing period. The average forage dry matter yield in the regional yield trial was about 13.1, 12.1 MT per ha in upland and paddy field, respectively, which were 9%, 2% higher than that of the check cultivar. It’s also showed 6.8% crude protein, 27.1% ADF (acid detergent fiber), and 67.5% TDN (Total Digestible Nutrients), including higher silage quality for whole crop barley. This cultivar would be suitable for the area whose daily minimum temperature was above -8℃ in January in Korean peninsula.

‘Muhan’ (Hordeum vulgare L.), a new ruminant-palatability forage barley cultivar, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, RDA in 2013. It was derived from the cross between SB921011-3B-16-2/IT0188556 and ‘Suwon 365’. Among the cross made in 2002, a promising line, SB02T2097-B-B-B-18, showed good characteristics in potential forage yield in the yield trial tested at Iksan in 2009 to 2010 designated as Iksan 465. The line in the Regional Yield Trials(RYT) tested in eight locations around Korea for three years from 2011 to 2013, and was released as the name of ‘Muhan’. It has the growth habit of group Ⅳ, erect plant type, green leaf and awnless spike. Its average heading and maturing dates were on May 4, and June 4, respectively, with similar to check cultivar ‘Youngyang’. The cultivar had 102cm of culm length, 711 spikes per m2 and it showed better rate of leaf, winter hardiness, and resistance to BaYMV than those of the check cultivar. The average forage yield of ‘Muhan’ was about 12.4 ton ha-1 in dry matter in paddy field. ‘Muhan’ also showed 6.6% of crude protein content, 28.6% of ADF (Acid Detergent Fiber), 50.1% of NDF (Neutral Detergent Fiber), and 66.3% of TDN (Total Digestible Nutrients), including higher grade of silage quality for whole crop barley

‘Jungmo2506’ (Hordeum vulgare L.), a new ruminant-palatability forage barley cultivar, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, RDA in 2013. It was derived from the cross between ‘Sunwoo’ and ‘Milyang 34’. Among the cross made in 2002, a promising line, SB02T2020-B-BB- 64, showed good characteristics in potential forage yield in the yield trial tested at Iksan in 2009 to 2010 designated as Iksan 463. The line in the Regional Yield Trials(RYT) tested in eight locations around Korea for three years from 2011 to 2013, and was released as the name of ‘Jungmo2506’. It has the growth habit of group Ⅳ, erect plant type, green leaf and short awn spike. Its average heading and maturing dates were on May 3, and June 2, respectively, with similar to check cultivar ‘Youngyang’. The cultivar had 99cm of culm length, 692 spikes per m2 and it showed better rate of leaf, winter hardiness, and resistance to BaYMV than those of the check cultivar. The average forage yield of ‘Jungmo2506’ was about 11.8 ton ha-1 in dry matter in paddy field. ‘Jungmo2506’ also showed 6.6% of crude protein content, 27.4% of ADF (Acid Detergent Fiber), 49.2% of NDF (Neutral Detergent Fiber), and 67.2% of TDN (Total Digestible Nutrients), including higher grade of silage quality for whole crop barley.

Path planing method for an autonomous mobile robot is considered. For the practical applications, the simplified local potential field methods are applied under the constraints of the driving condition. To improve the performance, the fuzzy-approximated linear function method is also used.