Intermuscular fat is essential for enhancing the flavor and texture of cultured meat. Mesenchymal stem cells derived from intermuscular adipose tissues are a source of intermuscular fat. Therefore, as a step towards developing a platform to derive intermuscular fat from mesenchymal stem cells (MSCs) for insertion between myofibrils in cultured beef, an advanced protocol of intermuscular adipose tissue dissociation effective to the isolation of MSCs from intermuscular adipose tissues was developed in cattle. To accomplish this, physical steps were added to the enzymatic dissociation of intermuscular adipose tissues, and the MSCs were established from primary cells dissociated with physical step-free and step-added enzymatic dissociation protocols. The application of a physical step (intensive shaking up) at 5 minutes intervals during enzymatic dissociation resulted in the greatest number of primary cells derived from intermuscular adipose tissues, showed effective formation of colony forming units-fibroblasts (CFU-Fs) from the retrieved primary cells, and generated MSCs with no increase in doubling time. Thus, this protocol will contribute to the stable supply of good quality adipose-derived mesenchymal stem cells (ADMSCs) as a fat source for the production of marbled cultured beef.

Livestock production costs are heavily influenced by the cost of feed, The use of domestically grown forages is more desirable for livestock feed production. As part of this study, triticale, which is an extremely palatable and easily cultivable crop in Korea, was used to produce low moisture silage bales with lactic acid bacteria (LAB) and then stored for different periods. We examined the nutrient content of silage, such as crude protein (CP), acid detergent fiber (ADF) and neutral detergent fiber (NDF), as well as their organic acids, including lactic acid, acetic acid, butyric acid, at different storage periods. The nutrient content of silages, such as crude protein, ADF, and NDF, did not change significantly throughout storage periods. Organic acid data indicated that lactic acid concentrations increased with increasing moisture contents and storage periods up to nine months. However, further extending storage to 12 months resulted in a reduction in the lactic acid content of all silages as well as an increase in their pH. Based on the present results, it suggested that the production of low moisture silage with the LAB may be able to preserve and maintain its quality without altering its nutritional composition. Also, the lactate content of the silage remained significant for at least nine months.

Domestic ports are becoming increasingly complex due to the introduction of various marine 4th industry new technologies and the increase in marine logistics. Accordingly, the number of lightings behind the port is also increasing significantly, and there is a great demand for improving the visibility of the AtoN used as a means of transmitting information to vessel operators. This paper describes the development of the performance inspection system that can verify the synchronization and sequential flashing of maritime lanterns that is being introduced to enhance the visibility of AtoN.

Recently, the necessity of designing and applying tool materials that perform machining of difficult-to-cut materials in a cryogenic treatment where demand is increasing. The objective of this study is to evaluate the performance of cryogenically treated WC-5 wt% NbC hard materials fabricated by a pulsed current activated sintering process. The densely consolidated specimens are cryogenically exposed to liquid nitrogen for 6, 12, and 24 h. All cryogenically treated samples exhibit compressive stress in the sintered body compared with the untreated sample. Furthermore, a change in the lattice constant leads to compressive stress in the specimens, which improves their mechanical performance. The cryogenically treated samples exhibit significant improvement in mechanical properties, with a 10.5 % increase in Vickers hardness and a 60 % decrease in the rupture strength compared with the untreated samples. However, deep cryogenic treatment of over 24 h deteriorates the mechanical properties indicating that excessive treatment causes tensile stress in the specimens. Therefore, the cryogenic treatment time should be controlled precisely to obtain mechanically enhanced hard materials.

This study attempts to analyze the economic impact of the service robot industry using Input-Output analysis, which is conducted based on Demand-driven model, the Leontief price model, the Backward and Forward Linkage Effects, and the Exogenous Methods. In a Demand-driven model analysis, we can conclude that the service robot industry contains characteristics of both the manufacturing industry and the service industry, which causes a positive impact on the overall industry by compensating for the weaknesses of the two industries. The Leontief price analysis indicates when wages in the service robot industry increase, prices related to robot manufacturing also increase. Also, when profits in the service robot industry increase, prices related to service provision increase, too. The Backward and Forward Linkage Effects analysis shows that the service robot industry is highly sensitive to the current economic condition and has a great influence on the service industry. The service robot industry can highlight the aspect of service characteristics when the manufacturing industry is in recession and vice versa. In addition, the service robot industry can be regarded as a value-adding and domestic economy promoting industry which utilizes knowledge of information and communication technologies. It is important to foster the service robot industry in South Korea, which is in economic recession to provide an opportunity to stimulate the growth of both service and robot industries.

The function of coolant in machining is to reduce the frictional force in the contact area in between the tool and the material, and to increase the precision by cooling the work-piece and the tool, to make the machining surface uniform, and to extend the tool life. However, cutting oil is harmful to the human body because it uses chlorine-based extreme pressure additives to cause environmental pollutants. In this study, the effect of cutting temperature and surface roughness of titanium alloy for medical purpose (Ti-6Al-7Nb) in eco-friendly ADL slot shape machining was investigated using the response surface analysis method. As the design of the experiment, three levels of cutting speed, feed rate, and depth of cut were designed and the experiment was conducted using the central composite planning method. The regression expressions of cutting temperature and surface roughness were respectively obtained as quadratic functions to obtain the minimum value and optimal cutting conditions. The values from this formula and the experimental values were compared. As a result, this study makes and establishes the basis to prevent environmental pollution caused by the use of coolant and to replace it with ADL (Aerosol Dry Lubricant) machining that uses a very small amount of vegetable oil with high pressure.

The home hydroponic system used in this experiment supplied the nutrient solution using the ebb and flow-type system, and the supply time, interval, and water levels of the nutrient solutions were fixed. This experiment was conducted to find a more favorable growth medium for plant growth in the hydroponic system. The medium used in the experiment was of two types, phenolic foam and rockwool, and the heights were 28 and 38 mm, respectively. As for the the multipurpose nutrient solutions (GNU1 and GNU2) were prepared in the lab. The composition of the GNU1 and GNU2 was the same, and there was a difference between 100 and 70% in ion concentrations. The plants used were Ssamchoo (Brassica lee ssp. namai) and Romaine lettuce (Lactuca sativa L. var. longiflora). First, in the physicochemical measurements of the empty medium, change in the pH and EC of the distilled water passing through the medium was less in the rockwool than in the phenolic foam. This indicates that there is less change in the chemical properties of the nutrient solution due to the medium when rockwool is used. After hydroponic culture of Ssamchoo and Romaine lettuce, the medium showed more residual salts in Romaine lettuce. Both Ssamchoo and Romaine lettuce showed less salt accumulation in rockwool. The emergence rate was significantly higher in rockwool for both species. The lower height of the medium, the faster the emergence was. Ssamchoo displayed significantly higher fresh weight (124.7%), shoot length (107.6%), and leaf width (107.9%) when grown in GNU1, but there were no significant differences as affected by the medium. However, in Romaine lettuce, the type and height of the medium resulted in significant differences. The fresh weight of Romaine lettuce was significantly higher in rockwool (119.6%) than in phenolic foam, and significantly higher at 38 (114.6%) than 28 mm. Although there is a difference depending on the species, rockwool is more suitable for the ebb and flow-type system than phenolic foam, and the height of 38 is more advantageous than 28 mm.

Thermal management is significant to maintain the reliability and durability of electronic devices. Heat can be dissipated using thermal interface materials (TIMs) comprised of thermally conductive polymers and fillers. Furthermore, it is important to enhance the thermal conductivity of TIMs through the formation of a heat transfer pathway. This paper reports a polymer composite containing vertically aligned electrochemically exfoliated graphite (EEG). We modify the EEG via edge selective oxidation to decorate the surface with iron oxides and enhance the dispersibility of EEG in polymer resin. During the heat treatment and curing process, a magnetic field is applied to the polymer composites to align the iron oxide decorated EEG. The resulting polymer composite containing 25 wt% of filler has a remarkable thermal conductivity of 1.10 W m− 1 K− 1 after magnetic orientation. These results demonstrate that TIM can be designed with a small amount of filler by magnetic alignment to form an efficient heat transfer pathway.

In this study, molten salt experiments were performed using a multi-purpose molten salt experimental loop to evaluate the corrosion and thermodynamic properties of the molten salt. The multi-purpose molten salt experimental loop is made of 1-inch austenitic 316 stainless steel, and 1/4-inch austenitic 316 stainless steel tubes were welded on the surface of a 1-inch pipe to measure temperatures of molten salt. During the experiment, the molten salt leaked due to corrosion of the welded part of the 1/4-inch tube connected to the 1-inch pipe. Therefore, the cause of corrosion damage of the leaked welded part was analyzed. The effect of NaCl-MgCl2 salt selected as the molten salt on corrosion failure was considered. And based on the operation data of molten salt experiments, the time of occurrence of the issue was estimated. Lastly, the cause of corrosion failure was estimated by comparing and analyzing the pipe shape before and after failure using SEM-EDS.