Tank 모형의 매개변수를 추정하는데 있어 유출성분을 고려하여 모의할 수 있는 방법을 제안하였다. 제안된 방법은 관측수문곡선을 Digital filter 방법을 사용하여 유출성분별로 분리하고 각 유출성분을 고려하여 Powell 방법으로 매개변수를 추정하는 것이다. 본 연구에서는 한강유역의 4개 댐지점을 선정하여 유출성분을 고려한 경우와 그렇지 않은 경우를 구분하여 모의유량을 관측유량과 비교 검토하였다. 그 결과 자동추적법으로만 매개변수를 추정할 때에는

본 연구에서는 전체탐색기법 중 Simplex법의 원리를 이용한 SCE-UA법과 Annealing-Simplex (A-S)법을 일유출량 추정 수문모형인 탱크모형의 매개변수 보정에 적용하여 국부탐색기법인 Downhill Simplex법의 결과와 비교하여 탐색능력을 평가하였다. 오차가 없는 합성자료를 사용한 보정에서 A-S법이 목적함수에 관계없이 전역최적해를 탐색하는 결과를 나타냈으며, SCE-UA법은 ABSERR를 목적함수로 사용할 경우에 전역최적해를 탐색

일반적으로 2차원 수질모형들은 배경이론이 복잡하고 그에 따라 입력자료나 매개변수가 복잡해지며 매개변수들간의 상호영향을 인식하는 것이 매우 어렵게 되어 초보자의 경우 적절한 매개변수론 선택하기가 쉽지 않다. 따라서 본 연구에서는 2차원 수질모형내의 여러 매개변수들간의 관련성을 평가하는 민감도 분석을 기반으로한 추론기관개발과 ArcView/Avenue를 활용하여 전문가 시스템을 구축함으로써 모형의 수질매개변수를 추정하고 모의를 실시하여 정확한 해석결과를 얻

본 연구에서는 공간적으로 분포된 강우자료를 바탕으로 한 강우유출관계를 고찰하고, 기존의 공간 평균된 강우유출모형과 비교하여 유역을 공간 평균함으로써 내재되는 불확실성을 분석하여 이를 정량화시킬 수 있는 방법을 모색하였다. 과거 관측된 호우사상을 단순 크리깅 기법을 이용하여 공간적으로 분포된 강우자료를 구축하였다. 공간 분포된 강우와 공간평균강우의 유출을 비교하기 위하여 공간 분포된 강우를 수정 Clark 방법에 의해서 유출계산을 수행한 결과와 지점 강우

The Keum river is one of the important river in Korea and has a drainage area of 9,873 ㎦. The Keum river is deepening pollution state due to development of the lower city and construction of a industrial complex. The water quality of the Keum river come to eutrophication state and belong to Ⅲ grade of water quality standard. The concentration BOD in river is affected by the organic loading from a tributary and the algae biomass that largely happen to under eutrophication state. In the eutrophic water mass such as the Keum river, the autochthonous BOD was very important part for making a decision of water quality management, because it was accounted for majority of the total BOD. The purpose of this study was to survey the characteristics of water quality in summer and to estimate reaction coefficient. Also, we studied to correlationship between chlorophyll a and BOD(COD) for estimation of the autochthonous BOD. The correlationship between chlorophyll a and BOD(COD) were obtained through the culture experiment of phytoplankton in the laboratory. The results of this study may be summarized as follows ; The characteristics of water quality in summer were belong to Ⅲ∼Ⅳgrade of water quality standard as BOD and nutritive condition is very high. The BOD, ammonia nitrogen and phosphate loadings in Miho stream which inflowing untreated sewage from Chungju city was occupied with 64.07%, 26.36%, 46.08%, respectively. Maximum nutrient uptake (Vmax) was 0.4400 μM/hr as substrate of ammonia nitrogen, 0.1652 μM/hr as substrate of phosphate. Maximum specific growth rate (μmax) was 1.2525 hr-1 as substrate of ammonia nitrogen, 1.5177 hr-1 as substrate of phosphate. The correlation coefficient between chlorophyll a and BOD by the culture experiment were found to be 0.911∼0.935 and 0.942∼0.947 in the case adding nutrient and no adding nutrient, respectively. The correlation coefficient between chlorophyll a and COD through the culture experiment were found to be 0.918∼0.977 and 0.880∼0.931 in the case adding nutrient and no adding nutrient, respectively. The autochthonous BOD(COD) was estimated to the relationship between BOD(COD) and chlorophyll a. The regression equation were found to be autochthonous BOD=(0.045∼0.073)×chlorophyll a and autochthonous COD=(0.137∼0.182)×chlorophyll a.

A newly developed heuristic algorithm, Harmony Search, is applied to the parameter calibration problem of the nonlinear Muskingum model. The Harmony Search could, mimicking the improvisation of music player, find better parameter values for in the nonline

A series of meteorological observation using automation weather station(AWS) carried out to investigate characteristics of nocturnal meteorological parameters for 16∼17 June 1998 at Buljeongdong mountain slope, Kyungbuk. Dry temperature at valley was lower than mountain because of high lapse rate at valley, so the strong inversion layer occurrenced at mountain slope for nighttime. Contrary of dry temperature, relative humidity of valley was higher than mountain for nighttime. Wind speed at valley from sunset to next day morning was lower than mountain, but that of valley after sunrise was higher than mountain. Wind direction at valley for all observation time were southeasterlies(SE), that of mountain for nighttime were northeasterlies(NE) or northnorthwesterlies(NNW), and that of mountain after sunrise were irregular. Vapor pressure at valley for all observation time was higher mountain, particularly the difference was high for nighttime.

The adsorption experiment of phenol(Ph) from aqueous solution on granular activated carbon was studied in order to design the fixed-bed adsorption column. The experimental data were analyzed by unsteady-state, one-dimensional heterogeneous model. Finite element method(FEM) was applied to analyze the sensitivity of parameter and to predict the fixed-bed adsorption column performance on operation variable changes. The prediction model showed similar effect to mass transfer and intraparticle diffusion coefficient changes suggesting that both parameter present mass transfer rate limits for GAC-phenol system. The Freundlich constants had a greater effect than kinetic parameters for the performance of fixedbed adsorption column. FEM solution facilitated prediction of concentration history in solution and within adsorbent particle.

급속한 도시화의 영향에 따른 수자원 및 환경문제를 보다 효율적으로 해결하기 위하여 전문가 시스템의 개발 및 적용방안을 제안하였다. 이에 따라 도시유역의 유출 및 수질에 영향을 미치는 주요 매개변수들을 선별하고 민감도 분석 등을 통해 그 거동특성을 제시하였으며, 이러한 특성들을 바탕으로 효과적 매개변수 결정법칙 등을 제안하였다. CLIPS 6.0을 적용하여 ‘사실’과‘규칙’을 기본으로 한 전문가 시스템 ESPE를 개발하였으며, 이를 안양천 유역에 적용하였

An one dimensional atmosphere-canopy-soil interaction model is developed to estimate of the heat budget parameter in the atmospheric boundary layer. The canopy model is composed of the three balance equations of energy, temperature, moisture at ground surface and canopy layer with three independent variables of T_f(foliage temperature), T_g(ground temperature), and q_g(ground specific humidity). The model was verified by comparative study with OSUID(Oregon State University One Dimensional Model) proved in HAPEX-MOBILHY experiment. Also we applied this model in two dimensional land-sea breeze circulation. According to the results of this study, surface characteristics considering canopy acted importantly upon the simulation of meso-scale circulation. The factors which used in the numerical experiment are as follows ; the change for a sort of soll(sand and peat), the change for shielding factor, and the change for a kind of vegetation.

An algorithm to determine the optimum nominal value of geometrical and material parameters in divice modelling is proposed. The algorithm uses the yield and variance prediction formula and Monte-Carlo analysis. The performance specification of the noise figure must also be satisfied. In this paper, the total number of considered devices is 1000, and each parameter of geometrical and material parameters is generated randomly within the limits of ±3% of nominal value, and the distribution of 1000 geometrical and material parameters is gaussing distribution.

One of the main purposes of the marine gyrocompass follow-up system is to preserve the sensitive part from the wandering error due to the frictional or torsional torque around the vertical axis. This error can be diminished through the rapid follow-up action, which minimizes the relative azimuthal angular displacement between the sensitive and follow-up parts and shortens the duration of the same displacement. But an excessive rapidity of the follow-up action would result in a sustained oscillation to the system. Therefore, to design a new type of the follow-up system, the theoretical annlysis of the problems concerned should be studied systematically by introducing the control theory. This paper suggest a concrete procedure for the optimal adjustment of the gyrocompass follow-up system, utilizing the mathematic model and the stability informations formerly investiaged by the author. For theoptimal determination of the adjustable paramfter K, the performance index(P.I.), ITSE(Intergral of the Time multiplied by the Squared Error) is proposed, namely, P.I. = ʃ0∞ t · e2(t)dt where t is time and e(t) means control error. Then, the optimal parameter minimizing the performance index is calculated by means of Parseval's theorem and numerical computation, and the validity of the obtained optimal value of the parameter Ka is examined and confirmed through the simulations and experiments. By using, the proposed method, the optimal adjustment can be performed deterministically. But, this can not be expected in the conventional frequency domain analysis. While the Mps of the original system vary to the extent of from 0.98 to 46.27, Mp of the optimal system is evaluated as 1.1 which satisfies the generally accepted frequency domain specification.