This study introduces a method to eliminate formaldehyde and benzene, toluene from indoor air by means of a photocatalytic oxidation reaction. In the method introduced, for the good performance of the reaction, the effect and interactions of the TiO2 catalyst and ultraviolet in photocatalytic degradation on the reaction area, dosages of catalysts, humidity and light should be precisely examined and controled. Experiments has been carried out under various intensities of UV light and initial concentrations of formaldehyde, benzene and toluene to investigate the removal efficiency of the pollutants. Reactors in the experiments consist of an annular type Pyrex glass flow reactor and an 11W germicidal lamp. Results of the experiments showed reduction of formaldehyde, benzene and toluene in ultraviolet /TiO2/ activated carbon processes (photooxidation-photocatalytic oxidation-adsorption processes), from 98% to 90%, from 98% to 93% and from 99% to 97% respectively. Form the results we can get a conclusion that a ultraviolet/Tio2/activated carbon system used in the method introduced is a powerful one for th treatment of formaldehyde, benzene and toluene of indoor spaces.

After the 2000's, the rural village development projects are designated as participatory rural village development programs and projects. The purpose of this study is to draw a scheme to facilitate resident's participation in rural village development project by exploring the factors influencing resident's participation. For this, in Namsa rural theme village in Dansung-myon, Sanchung-gun, Kyongnam Province, the data were collected through field surveys and interviews residents residing in this village. In addition, observations studies and an opinion survey of the persons concerned in the presentation meetings were also conducted. I investigated and analysed the activation factors and the characteristics of residents' participation, and amenity resources which were essential for community planning including the planning-establishment, theme-searching and development of experience program. Through this study, I drew findings as follows; 1) The leader's leadership and residents' positive participation are very important activation factors in the first stage of rural viability. 2) And then, the external support and concern, the establishment of short-and long-term community planning, and the rural-income increase through the development of amenity resources play important roles as activation factors in the successive stage of rural viability. Based on the results of this study, the following recommendations were made. In order to improve the level of resident's participation in rural village development programs and projects, it is necessary to evaluate their successes, failure, barriers and the positive correlation between their success more delicately. In addition to this, it must be suggested the better model for participatory rural village development programs for the further enhancement and improvement of rural village development projects.

근래 국내 산업의 고도화와 수출입 증가에 따른 경제력의 상승과 함께 도로, 교량 및 항만시설의 확충과 각종 호안 및 해상구조물의 건설요구가 급증하고 있다. 해양수산부는 9대 신항만의 건설과 기존어항의 재개발을 추진하고 있다 이들 구조물의 대부분은 교각기초, 안벽, 돌핀, 안벽, 돌제 등은 강재나 콘크리트 파일로 새롭게 건설되고 있다. 이들 기초, 지지격벽 및 파일은 건설 후에 수면아래에 있게 되므로 구조물의 상태를 파악하기가 어렵고, 그 구조물의 보수나 보강이 충분하지 못한 상태이다. 더구나 매년 이러한 유지 보수작업은 구조물의 부식을 방지하기 위한 불완전한 보수와 수중공사로 인한 장기작업으로 고비용 때문에 정부의 예산을 소진하게 된다. 이와 같은 정부예산의 지출을 절감하기 위해서는 기존 구조물의 내구연한을 연장시킬 필요가 있는 것이다. 그러므로, 부유식 케이슨으로 건식작업환경을 제공함으로써 평균해수면 수중구조물의 유지를 위한 새로운 기법을 개발하였다. DCPM은 작업구간을 쉽게 이동하고 취급이 용이한 것으로 나타났다. 또한 DCPM은 유지보수비용 및 방식작업 시간을 현저하게 줄였다. DCPM은 해안 및 수중구조물의 유지와 건설비용을 줄이는 이정표가 될 것으로 본다.

게임 엔진에서 처리하는 속성과 절차가 매우 유사한 많은 게임 소프트웨어들이 다른 게임 에서 참조하거나 재사용하지 않고 새로운 게임을 개발할 때 게임엔진 부분에 대한 중복투자 문제가 발생한다. 특히 현재 게임 소프트웨어 개발사들이 게임을 개발할 때 매우 다양한 소프트웨어 개발 프로세스를 사용하고 있는 것이 중복투자의 주된 문제점 중 하나이다. 그러므로 게임엔진에 대한 프로세스의 표준화가 되어있지 않아 현재 개발 중인 게임 소프트웨어에 다른 소프트웨어 개발과정에서 생성된 산출물을 이해하고 재사용할 수가 없다. 따라서 어느 게임 소프트웨어 개발사가 특정 게임을 개발할 때 다른 게임 소프트웨어와 동일한 게임 엔진 처리에 대하여 새롭게 분석하고 설계하는 것이 현재의 게임 소프트웨어가 안고 있는 커다란 문제점이다. 이러한 문제점을 해결하기 위해 본 논문에서는 컴포넌트 기반 개발방법을 적용할 수 있도록 게임 엔진 개발에 대한 공정개선, 구조와 관계성 분석, 계층별 모듈별 분류와 조합 방법, 저장소 구현, 프로세서 모형을 제시하였다.

A recycling process for the waste FRP from boats was developed. The recycling process is composed of decomposition of waste FRP with propylene glycol and synthesis of recycled unsaturated polyester resin from the decomposed liquid material. Prior to the decomposition, waste FRP was cut into 2cm x 5cm segments and mechanical impact was applied by press roller to give gaps between cumulated laminates. Propylene glycol effectively decomposed the waste FRP segments and glass fibers were easily separated from decomposed liquid material. Recycled unsaturated polyester resin could be made from the decomposed liquid material by reaction with maleic anhydride and phthalic anhydride.

본 논문은 국내게임산업기술 동향을 파악하고 현재 개발된 게임들의 완성도를 상대평가 하는데 필요한 게임개발수준의 정량화 방법을 제시하고자 한다. 이를 위하여 게임제작회사(11명), 유통회사(7명), 프로게이머(10명)를 대상으로 실시한 설문조사를 통해 얻은 자료로 게임개발구성요소별 가중치를 계층분석과정을 사용하여 계산하는 방법을 제안하고, 산출된 가중치를 이용하여 게임완성도를 스코어로 정량화 시켰다. 가중치를 적용시켜 얻은 장르별 게임완성도 및 선택된 35가지의 게임 에 대한 각각의 게임완성도 스코어를 히스토그램으로 나타내어 분석하고, 이들의 게임개발구성요소별 평가스코어를 작성하여 국내 게임산업 기술의 현주소를 파악함과 동시에 앞으로의 발전 방향을 제시하였다.

준설작업 효율성은 장비의 형식, 준설토의 특성, 작업의 성격, 작업 시행 전.후에 이루어지는 측량작업 등에 의해 결정된다. 특히, 준설선의 위치제어와 준설지점의 수심 측량은 전체 공정의 효율성 결정에 중요한 인자가 된다. 우리나라 준설업체가 주로 보유하고 있는 펌프식 준설선은 연속작업이 가능하고, 타 기종에 비해 작업해역에서 탁도 발생이 적다는 장점이 있지만 제거되는 슬러리에 토사 함유량이 적고, 위치 정확도가 낮다는 큰 단점이 있다. 본 연구에서는 LADGPS, 조석관측시스템, 광센서 각도추출장치, GIS와 전자해도를 이용하여 4개의 하부시스템으로 구성된 펌프식 준설선 통합공정관리시스템을 개발하여 준설선 위치제어, 실재 굴착이 이루어지는 준설지점의 위치결정, 작업해역의 조위가 보정된 실시간 수심결정, 작업지시내용 및 작업성과를 기록하고 이들 모든 정보를 작업자 모두가 실시간으로 모니터링하고 제어하는 공정관리를 수행할 수 치도록 하였다. 이 시스템을 펌프식 준설선인 "은진PD-2"에 설치하여 운영하였으며, 기존의 작업방식과의 작업효율성 비교를 위한 작업성과 데이타는 아직 추출하지 못했지만 일부 유사한 하부시스템이 적용된 그라브 쿤설선 공정관리시스템의 효율성 분석결과에서 준설해역의 편평도가 45cm 이내로 양호하고, 작업기간을 227f 단축하였으며, 작업비용을 16.6% 절감된 것으로 나타났다.

For the purpose of developing a new process for the elimination of oil components from oily waste water, experimental researches using oil gelling agent were performed. The process is composed of three units, that is, decantator, gelling column and adsorption column. l0g of gelling agent in the gelling column could effectively absorb 15.65g of oil from ship washing waste water and 16.93g of oil from steel industry waste water. COD in waste waters dramatically diminished not in the gelling column but in the adsorption column. The gelling is hindered by other organic components in waste water, and the optimum space time for the gelling column is 20min. lg of gelling agent absorbed 3.7-4.0g of oil from waste waters with 25 min in the batch operation.

Accuracy of dredging processes depends on the types of equipment used, the sediments encountered, whether the work to be performed is new or maintenance dredging, pre- and post-hydrographic surveying and so forth. Among those, position surveying accuracy which is directly determined by the control of the dredge's position and depth surveying accuracy being surveyed at the dredging point during dredging work are important factors. The purpose of this study is to develop 'Dredge Management System'for Grab dredge which is composed of 4 sub-system using LADGPS for dredge position determining system and dredging point determining system, tide gauge system and optical sensor for depth determining system and GIS and ENC for total management system. This system is installed on the grab dredge 'EUNJIN G-18'and applied to anchorage dredging work. at Pohang Harbor. The results revealed that this system is easy to operate, achieves good accuracy with only 45cm unevenness, reduces working period by 22 percent and saves cost 16.6 percent.

Nitrate-selective ion exchange resin which have bulky tertiary amine as functional group have been synthesized by the reaction of chloromethylated polystyrene-divinylbenzene copolymer and the corresponding tertiary amine [NR3=NEt3 1, N(C2H4OH)3 2] in ethanol, while commercial resin has NMe3 as functional group. The fundamental properties such as bulk density, water content, appearance index, exchange capacity, effective size, uniformity coefficient of synthesized anion exchange resin (1) have been measured. The ion exchange resin (1) and (2) exhibited the better selectivity for nitrate than sulfate in both batch and continuous column experiments.

A kinetic study for nitrate removal by anion exchange resin was performed using continuous column reactors. Kinetic approach from the packed bed showed the reaction rate constant k1 was 0.07∼0.17 ℓ/㎎·hr and maximum exchange quantity q0 was 27.75∼31.81 ㎎/g. The results from the continuous column well agreed with that from the batch reactor. An economic analysis of the water treatment plant by anion exchange resin with a regenerating system was performed to design plant and process. Based on the treatment of 20 ㎎/ℓ nitrate-contained wastewater of 10,000 gallons per day to 2 ㎎/ℓ , total capital cost and total annual cost are estimated to be 836 million wons and 211 million wons, respectively.

A kinetic study for anion exchange was performed for commercially available Cl- type anion exchange resin in use to remove nitrate in water. The obtained results from the batch reactor were applied to the Langmuir and Freundlich models. The constants for Langmuir model were qmax=29.82 and b=0.202, and for Freundlich model were K=5.509 and n=1.772. Langmuir model showed better fit than Frendlich model for the experimental results. Ion exchange reaction rate was also calculated and the approximate first-order reaction, rate constant k1 was 0.16 L/㎎·hr. Effective diffusion coefficient was obtained in the range from 9.67×10 exp (-8) to 1.67×10 exp (-6) ㎠/sec for initial concentration change, and from 6.09×10 exp (-7) to 3.98×10 exp (-6) ㎠/sec for reaction temperature change. Activation energy during the diffusion was calculated as 36 ㎉/㏖.

Recently, the role of container ports is radically changing, These changes are largely driven by the innovation process of Logistics such as Supply Chain Logistics and Global Logistics due to the international expansional of industry. Under this environment, It is required that the container port should act as a integral part of a Supply Logistics Chain especially to provide the customer-oriented logistics service. This paper deals with the development strategy of container ports coping with these changes in the view point of container ports as a Logistics infrastructure to provide customer-response services and necessary to the economic promotion of hinterlands. Strategy is suggested in the phases of the customers desire, the pattern of container cargo, the economic promotion of hinterlands, and interrelation of container ports in north-east Asia and also domestics through the analysis of competiveness of container ports.

Recently leading edge companies use the Supply Chain Management as a competitive weapon to secure and maintain customer loyalty. As a consequency they are concentrating resources on the company’s core business and employing strategic alliances with third-party providers to ensure the company provides its customers’desired logistics service levels at acceptable costs. Under this circumstances this paper surveys the third party logistics as a leading edge logistics industry coping with the progress of the supply chain management. The status and the type of the TPL including the Forwarder are analyzed in the view point of global logistics. Also the development strategy of third party logistics in the future is suggested.

This paper is to describe the characteristics of the Small Towns development in Rural China. The policies to develop Small Towns have been induced for solving the problem raised during the rural reform. The changes and adaptations of rural reform processes are integrated in Small Towns. The characteristics in the process of development of Ronggang, a small town, are as follows. First, it was the fund raised by rural inhabitants that was used for construction and development of the small town, Second, by implementing the policies of selective migration, the inhabitants of the small town have been differentiated from those of rural region. Third, the activities of commerce and industry of Ronggang have progressed to joint-stock system. Fourth, Having the spatial characteristics of self- development, the small town has grown and is expected to grow higher hierarchy of settlement system.

Ion exchange performance to remove nitrate in water was studied using commercially available strong base anion exchange resin of Cl^- type in the batch and continuous column reactors. The performance was tested using the effluent concentration histories for continuous column or equilibrium concentrations for batch reactor as a function of time until resins were exhausted or reached ionic equilibrium between resin and solution. Anion exchange resin used in this study was more effective than activated carbon or zeolite for nitrate removal. With large resin amount or low initial concentration, nitrate removal characteristics for a typical gel-type resin was increased. On considering the relation between the breakthrough capacity and nitrate concentration of the influent, the use of anion exchange resin were suitable for the higher order water treatment. The nitrate removal of above 90% could be possible until the effluent of above 650 BV was passed to the column. Thus, the commercially available strong base anion exchange resin of Cl^- type used in this study could be effectively used as economic material for treatment of the groundwater. The breakthrough curves showed the sequence of resin selectivity as SO_4^2- > NO_3, > NO^2- > HCO_3^-. The results of this study could be scaled up and used as a design tool for the water purification system of the real groundwater and surface water treatment processes.

Heavy metal adsorption by microbial cells is an alternative to conventional methods of heavy metal removal and recovery from metal-bearing wastewater. The waste Saccharomyces cerevisiae is an inexpensive, relatively available source of biomass for heavy metal biosorption. Biosorption was investigated by free and immobilized-S. cerevisiae. The order of biosorption capacity was Pb>Cu>Cd with batch system. The biosorption parameters had been determined for Pb with free cells according to the Freundlich and Langmuir model. It was found that the data fitted reasonably well to the Freundlich model. The selective uptake of immobilized-S. cerevisiae was observed when all the metal ions were dissolved in a mixed metals solution(Pb, Cu, Cr and Cd). The biosorption of mixed metals solution by immobilized-cell was studied in packed bed reactor. The Pb uptake was investigated in particular, as it represents one of the most widely distributed heavy metals in water. We also tested the desorption of Pb from immobilized-cell by using HCl, H_2SO_4 and EDTA.

답리작 맥류의 안전 재배법과 관련된 기초자료를 얻고져 '79년과 '80년에 호남작물시험장 맥류 시험포에서 백동을 10월10일부터 10일 간격으로 4회 파종하여 입의 발육특성을 조사하였던바 그 결과를 요약하면 다음과 같다. 1. 입장은 출수후 33일에 5.92mm, 입폭은 42일에 3.46mm, 입후는 45일에 2.58mm에 달하여 완전히 발육되었으며 이 시기보다 입장은 11일, 입폭은 7일 입후는 5일 정도 조기수확해도 유의감소하지 않았다. 2. 생리적 성숙기는 출수후 40∼46일로서 전작상태보다 10일이상 늦었다. 이때의 입중 수분함량은 28∼31％로 낮은 편이었으며, 파종기의 조만에 따른 차이는 아주 근소하였다. 3. 실용적 성숙기는 출수후 33∼39일로서 생리적 성숙기보다 7∼8일 빨리 오고 있으므로 생리적인 성숙기보다 1주일 정도 앞당겨 수확 할 수 있다고 추찰되었다. 4. 입중이 급신장하는 시기는 만파구가 조파구보다 2∼10일 정도 늦으나 소요기간은 약 7일 이 단축되었다. 완만기와 안정기는 각 9∼10일 이 소요되어 파종기의 조만에 관계없이 거의 일정하였다.