고강도콘크리트(압축강도 400-700kgf/cm/sup 2)를 이용한 구조물의 강도성능과 휨변형을 정확히 구하는 해석방법을 제안하는 것이 본 연구의 목적으로서, 재료특성을 모델화하기 위하여 희귀분석을 이용한 고강도콘크리트의 응력-변형률관계와 사다리꼴 응력모델을 검토하여 그 적용성을 확인하였다. 내력과 변형의 해석방법으로서는 단면을 요소분할하여 재료의 응력-변형률관계를 이용한 모멘트-곡률관계의 해석을 이용하였다. 여기서 본 연구는 재료특성의 불확정 변수와 해석시의 반복계산에 의한 오차를 최소화하기 위하여 확률적 개념을 이용한 몬테카를로 시뮬레이션의 방법을 도입하여 내력 및 변위성능을 합리적으로 평가하였다.

보의 비선형 해석프로그램의 개발에 있어서 변형연화현상을 고려해 주기 위하여 한점의 변위를 점증시키면서 구조물의 나머지 변위와 가해지는 하중들을 구하는 변위제어법을 사용하였으며, 신속한 결과의 도출을 위하여 단면의 성질인 모멘트-곡률 곡선을 이용하였다. 이때 변형연화현상으로 인하여 요소길이에 따라 같은 구조물일지라도 해석결과가 다르게 나타나는데 이 점을 보완해 주기 위해서 파괴에너지 개념을 도입하여 모멘트-곡률 곡선을 보정하였으며, 비선형 해석을 보다 단순화시키기 위하여 과다철근보에 대해서는 탄성-연화, 과소철근보에 대해서는 탄성-소성-연화로 선형화된 모델을 사용하였다. 이러한 본 해석프로그램을 이용하여 실험된 철근콘크리트 보들을 해석한 결과 보의 하중-처짐 곡선은 실험결과와 거의 일치함을 보였다.

In this study, through the static and dynamic finite element analyses, we want to present the basic data to confirm the effect of blast loading on the force-displacement curve and mid-span displacement history of SC walls installed in the nuclear power plant(NPP).

In this study, the partial correlation between the expansion and the vertical displacement excluding the temperature and the correlation between the expansion and vertical displacement and the average temperature of the reinforced truss member was analyzed. The correlation coefficients between temperature and expansion, temperature and vertical displacement were .929 and .874, respectively. The correlation coefficient between vertical displacement and expansion was 0.860 and partial correlation coefficient excluding temperature effect was 0.268.

This study compared the result applying two analysis methods based on Newmark Sliding Block theory to calculate permanent displacement that is an estimating factor for seismic safety of Fill Dam. It was analyzed FEM numerical coupled-analysis and Makdisi-Seed method. The permanent displacement for the body of dam during earthquake indicated similar displacements with each of them at the same seismic load.

Because stage cable-bridge have long spans and large members, their movements and geometrical changes by temperatures tend to be bigger than those of small or medium-size bridge. Therefore, it is important for maintenance engineers to monitor and assess the effect to temperature on the cable-supported bridges. To evaluate how much the superstructure expands or contracts when subjected to changes in temperature is the first step for the maintenance. Thermal movements of a cable-stayed bridge in service are evaluated by using long-term temperatures and displacements data.

Selection of a typical four companies products of domestic structural one-component sealant, high temperature, low temperature, room temperature to set up the environment for each of 80, -20, 20 ℃ and the left and right displacement of the test piece 30, 15, 0% of the maximum compression / expansion It was carried out by the repeated fatigue.

Current design codes (AASHTO, Korean Highway Bridge Design Code) do not account for dynamic effects. Since, the dynamic impact analysis is complicate to recommend and analysis. In this study, concrete bridge column were developed with two boundary conditions in order to take account dynamic behavior of the column and in-direct impact analysis was conducted. Furthermore, a comparison study of in-direct impact analysis with direct impact analysis was conducted.

Highway construction to the reinforced earth retaining wall which is under constant traffic load there is a possibility of generating the displacement at the top. In this study, it was conducted determine how to repair reinforcement method through examination of cause and stability analysis when occurs the displacement of reinforced earth retaining wall.

The sensors currently installed for bridge monitoring are faced with limitations in terms of the application and effectiveness of such systems in current long sized bridges, which are developing rapidly in terms of both size and function. Global Navigation Satellite System (GNSS) has been noted as an only way to overcome the limitations of such sensors. This is because they have numerous desirable characteristics that outweigh their high cost. However, GNSS installed for bridge monitoring has been used so far only in measurement of bridge displacement. Therefore, in this study, verify the usability of GNSS through correlation analysis between deflection and temperature