최근 우수한 전기전도도와 넓은 비표면적을 갖는 탄소나노튜브(CNT)를 활용하여 고강도 및 고내구성 콘크리트의 생산을 위한 연구가 많은 연구자들에 의하여 활발히 이루어지고 있다. CNT의 혼입을 통한 콘크리트의 고강도에 대한 연구가 주를 이루고 있으나, 그 외의 연구는 미흡한 실정이다. 이에, 본 연구에서는 CNT 첨가량에 대한 시멘트 복합체의 역학성능 및 발열성능에 대한 평가를 실시하였다. 낮은 물-바인더 비를 기반으로 하는 시멘트-플라이애시 배합에 대하여, 바인더 중량대비 0.2% 및 0.5%의 CNT 첨가에 따른 재령별 압축강도, 수화특성분석을 위한 미소수화열 분석, 페이스트 내 CNT의 분산 및 주변 수화물과의 관계를 규명하기 위한 SEM분석, 기준전극 삽입을 통한 발열실험 및 열 중량 분석을 실시하였다. CNT 첨가량의 증가에 따라 발열성능은 증가하며, CNT가 첨가되지 않은 기준 배합 CNT가 첨가된 배합의 경우 동등수준의 역학성능을 갖는 것으로 나타났다.

In this study, the cement composites incorporating Carbon Nanotube(CNT), Carbon Black(CB), and Carbon Fiber(CF) of 0.5, 1.0, and 1.5% of binder weight were evaluated to provide conductivity. In order to achieve this, compressive strength and electrical resistance were measured. As a result, the conductivity of cement composites incorporating CNTs was more sensitive than that of cement composites containing CB and CF.

In this study, the rate of change of electrical resistance with respect to the strength and load of cement composites was investigated by incorporating Carbon Nanotube(CNT) at 0.25, 0.5, 0.75, 1.0% of the binder weight. Compressive strength test It was shown that the load of 30% was repeatedly applied to impart conductivity through the rate of change of electrical resistance. The incorporation rate of CNT greatly affected the compressive strength and the rate of change of electrical resistance.

In this study, it evaluate the electromagnetic pulse shielding performance of fiber reinforced cement composite by Fiber type. Hooked-ended steel fiber, Smooth steel fiber and Amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electromagnetic pulse shielding performance was evaluated by MIL-STD-188-125-1.

Recently, the evaluation of the grout chamber of PC bridges has been emphasized in order to prevent many problems in advance. This paper analyzes the electrical resistance of the MWCNT cement composites by electrode intervals in order to select the optimum electrode location for evaluation of grout chamber. It is concluded that the electrical resistance of the MWCNT cement composite specimens increase as the electrode interval is longer.

This study is an attempt as an introductive investigation on the mechanical characteristics of Vectran fiber cementitious composites. The mixing of Vectran fibers into cementitious binder was tried to fit suitable fiber volume fraction in order to get of high-ductile and high-strength cementitious composites. Compressive and tensile strengths of the composite were evaluated.

The purpose of this study was to evaluate the direct tensile fracture behavior of fiber hybrid reinforced cement composite by strain rate. Experiment result, it was confirmed that PVA suppressed the microcrack around the steel fiber at the strain rate 101/s, which resulted in the improvement of the pullout resistance of the steel fiber.

This paper investigates the effect of nanomaterials on the piezoresistive sensing capacity of cement-based composites. Carbon nanotube, graphite nanofiber filament, carbon fiber were considered along with a cement composite which is included slicafume. After deriving optimum flowability, cement composites contained carbon materials were made respectively. Then, cyclic compressive test was performed with cement composite that contained 5% of each nano material.

In this paper, the effect of steel fiber-reinforced cement composite (SFRCC) on damage resistance of steel tube member. Test results show that the cumulative energy dissipation of SFRCC specimen was about 14% higher than that of Con specimen.

이 연구에서는 PE 섬유를 사용한 고연성 시멘트 복합체에 대해 최대입경 4.75 mm의 일반모래(강모래)를 규사와 서로 다른 비율로 혼합하여 사용하였을 때, 그에 따른 고연성 시멘트 복합체의 인장거동 변화를 실험을 통해 살펴보고자 하였다. 유동성 평가 실험에서는 강모래 치환율이 증가함에 따라 유동성이 증가하는 것으로 나타났다. 압축강도는 평균압축강도에는 큰 차이가 없었으나, 편차의 크기가 강모래 치환 율이 증가할수록 증가하는 것으로 나타났다. 일축인장시험 결과에서는 강모래 치환율에 따른 인장강도의 변화는 거의 없는 것으로 나타났으 며, 인장변형률 성능에서는 강모래 치환율이 증가함에 따라 향상되는 결과를 나타내었다. 강모래 치환율이 증가함에 따라 다중균열의 분포밀 도가 증가하면서 인장변형률 성능의 향상된 것으로 보인다. 한편, 인장변형률 성능의 편차는 압축강도에서와 마찬가지로 강모래 치환율이 증 가함에 따라 커지는 양상을 나타내었다. 이 연구를 통해 규사 대신 일반모래를 사용한 경우에도 고연성 시멘트 복합체의 인장거동의 변동성은 증가하지만, 규사를 사용한 고연성 시멘트 복합체와 비교할 때 등가 이상의 인장성능을 나타낼 수 있음을 확인하였다.

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate 10-6/s with multiple cracks. However, at the strain rate 101/s, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate 101/s

In this study, it evaluate the electrical conductivity of fiber reinforced cement composite by Fiber type. Hooked-ended steel fiber, Smooth steel fiber and Amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electrical conductivity was evaluated by calculating the electrical resistivity of each specimen after measuring the electrical resistance.

This study was aimed to investigate the tensile behaviors of PE fiber-reinforced highly ductile cementitious composites with different combinations of micro silica sand and normal sand with maximum particle size of 4.75mm. This study presented the feasibility of using normal sand instead of micro silica sand for highly ductile cementitious composites with equivalent or better uniaxial tensile performance.

This research is an application of SHCC (Strain harding Cementitious Composite) in concrete shear wall system in order to improve the structural performance of conventional shear walls. Based on experimental loading results, it was observed that the developed SHCC shear walls showed improved strength as well as enhancements in controlling of bending and shear cracks.

The purpose of this study was to evaluate the tensile fracture behavior of fiber hybrid reinforced cement composite according to the strain rate. Experiment result, it was confirmed that the number of cracks and the strain capacity tended to decrease with increasing PVA fiber volume fraction at the strain rate of 101/s.

본 연구에서는 유압식 급속재하 시험 장치를 제작하여 변형 속도에 따른 후크형 강섬유 및 폴리아미드 섬유보강 시멘트 복합체의 압축강도 및 인장강도 특성을 평가하였다. 그 결과, 변형 속도가 증가함에 따라 압축강도, 최대 응력 점에서의 변형 및 탄성계수는 증가하였으 며, 섬유 종류 및 혼입률은 변형 속도에 의한 압축강도의 영향은 크지 않았다. 본 연구에서 평가된 압축강도의 DIF는 CEB-FIP model code 2010 에 비해 상회하였으며, ACI-349의 예측값과 유사한 경향이 나타났다. 인장특성의 경우에도 변형 속도가 증가함에 따라 인장강도와 변형능력 이 크게 향상되었다. 후크형 강섬유보강 시멘트 복합체는 변형 속도가 증가함에 따라 섬유와 매트릭스의 부착력이 증가하는 것에 의해 인장강 도와 변형능력이 크게 향상되었으며, 섬유가 매트릭스로부터 인발되는 파괴 특성이 나타났다. 한편, 폴리아미드 섬유보강 시멘트 복합체의 경 우 섬유와 매트릭스의 부착력이 크기 때문에 섬유가 매트릭스로부터 인발되지 않고 끊어지는 파괴 특성이 나타났으며, 폴리아미드 섬유보강 시멘트 복합체의 인장특성에 대한 변형 속도 효과는 섬유의 인장강도에 큰 영향을 받는 것으로 판단되었다. 이러한 결과로부터 폴리아미드 섬 유보강 시멘트 복합체의 인장강도에 대한 변형 속도의 효과는 후크형 강섬유의 부착력에 대한 민감도 보다 큰 것으로 사료된다.

In this study, it evaluate the Impact fracture properties of fiber reinforced concrete and fiber reinforced cement composite. The types of fiber are Hooked-ended steel fiber and it was mixed 0.5, 1.0 vol.% in concrete and 1.0, 2.0 vol.% in cement composites. The Impact resistance performance was evaluated by measuring the fracture grade, penetration depth and scabbing depth

This paper describes the electrical characteristics of carbon fiber reinforced cement composite under compressive loading. The test results indicated that the electrical resistance changes of cement composite in compression were improved with increasing carbon fiber volume fractions.

In this study, it evaluate the Impact fracture properties of fiber reinforced concrete and fiber reinforced cement composite. The types of fiber are Hooked-ended steel fiber and it was mixed 0.5, 1.0 vol.% in concrete and 1.0, 2.0 vol.% in cement composites. The Impact resistance performance was evaluated by measuring the fracture grade, penetration depth and scabbing depth

This paper describes the electrical characteristics of carbon fiber reinforced cement composite under compressive loading. The test results indicated that the electrical resistance changes of cement composite in compression were improved with increasing carbon fiber volume fractions.