본 연구에서는 높은 이산화탄소 분리성능을 가지는 폴리이미드의 제조를 위해 2,2-bis(3,4-carboxylphenyl) hexafluoropropane과 두종류의 아민인 2,3,5,6-tetramethyl-1,4-phenylenediamine, Poly(ethylene glycol) bis(3-aminopropyl) terminated을 이용하여 합성을 진행하였다. 합성된 고분자를 비용매 상전이법으로 비대칭 분리막을 제조하기 위하여 고분자의 용 해도 지수 추정 값과 비용매 상전이 계수 측정을 통해 용매를 선정하였고, 고분자 용액 점도 측정을 통해 분리막 제조를 위 한 도프용액 중의 고분자의 함량을 결정하여 질산리튬을 첨가제로 사용하여 최종적으로 분리막을 제조하였다. 제조된 평판형 비대칭 분리막은 전자주사현미경(SEM)을 통해 질산리튬과 휘발성 용매 함량에 변화에 따른 모폴로지의 변화를 확인하였으 며, 이의 변화에 따른 기체 투과도 변화를 확인하였다. 분리막 제조를 위한 도프용액 중의 휘발성 용매 함량이 작을수록 선택 도 변화가 없으면서 이산화탄소 투과도가 증가하는 것을 확인하였다.

A single-layerd steel lattice roof, which has 50m span, was constructed. In order to figure out the realistic buckling load level, the structural analysis of this roof structure was performed especially by local snow load. Due to the characteristics of application of snow load, the load combinations of snow should be considered not only global area but also local part so that the critical buckling load could be observed as easy as possible. Geometrical imperfection was simulated to consider inaccurate shape of structure. And then nonlinear analysis were performed. Finally, this paper could investigate that the local snow load with geometrical imperfection decreased the level of buckling load significantly.

본 연구에서는 0.5 wt% 에멀젼형 절삭유 수용액에 평막형 분리막을 침지시키고 대칭 및 비대칭 사인파형 투과유속 연속운전(SFCO) 방식으로 실험하였다. 사용한 정밀여과막은 유효 막면적이 0.02 m2이고 공칭 세공크기가 0.15 μm이었다. 탁도 기준으로 에멀젼형 절삭유의 99% 이상이 제거되었으며 산기량이 증가할수록 TMP가 낮게 상승하였다. 비대칭형 SFCO 운전방식은 투과유속이 낮은 10∼15 L/m2·h 영역에서 대칭형 SFCO 운전방식보다 다소 유리하였다. 하지만, 투과유속이 높은 25∼30 L/m2·h에서는 대칭형 SFCO 운전이 매우 효과적임을 확인할 수 있었다.

This study was conducted to identify how a flexi-bar exercise influences body alignment and balance in adults who have asymmetry in their right or left body. In total, 20 participants were separated into the experimental group and the comparison group. Those in the experimental group participated in a flexi-bar exercise for 6 weeks and based on the coronal plane before and after exercise, their body alignment and balance were measured behind the body. The result was those who had participated in a flexi-bar exercise significantly improved their angle of acromion on both sides, the difference in the angle and height of the posterior superior iliac spine on both sides(p<.05), and the balance of the center sagittal plane(p<.05). Through this study, it could be said that participating in a flexi-bar exercise would improve postural alignment and balance of the shoulder and pelvis in adults with asymmetric posture.

용매 비용매 치환 상전이 공정과 증기 유도 상전이 공정을 결합하여 성능이 향상된 폴리술폰 정밀역과막을 제조 하였다. 본 연구에서 제조된 비대칭막은 폴리술폰(고분자), 디메틸 포름아미드(용매), 폴리비닐리돈(친수성 고분자 첨가제), 폴 리에틸렌글리콜(극성 고분자 액상 첨가제)로 이루어진 혼합 용액에 디메틸술폭사이드(극성 아프로틱 비용매), 물(극성 프로틱 비용매 첨가제)을 첨가하여 제막용 캐스팅 용액을 물과 이소프로판올 혼합용액에 침지하여 얻었다. 극성 아프로틱 비용매와 극성 프로틱 비용매의 첨가는 멤브레인의 구조를 제어하는데 유용한 방법이며 이를 습윤 공기를 캐스팅 용액에 노출시켜 준 응고상태를 만들어줌으로써 멤브레인의 내부 구조를 제어하고자 하였다. 또한 응고조의 조성을 물/이소프로판올의 혼합비를 통하여 조절하였다. 순수 투과도, 기공 크기 분포도, 표면 친수도 및 구조 분석이 이루어졌으며, 그 결과 평균 기공의 크기를 거의 0.2 μm 정도 향상시키는 효과를 가져왔으며 수 투과 유량 또한 1000-1800 LMH 정도 향상시키는 결과를 나타내었다.

Information System (IS) Success Model proposed by DeLone and McLean is applied as a successful operation tool of information system, with its basic assumption of symmetric relationship between independent variables and dependent variables of the structural equation modeling. However, because previous studies have proved asymmetry of quality factors' influence structure on dependent variable by applying three-factor analysis, this study examined asymmetry of impact structure of quality factors introduced in IS Success Model on user satisfaction. Also the study applies structure equation modeling (SEM), threefactor analysis and importance and performance analysis (IPA) to develop resource allocation strategy for IS success. The study is able to provide IS practitioners with strategic implications for allocating and managing limited resources more effectively.

본 연구의 주목적은 쌍동선형의 조파저항성능을 평가할 수 있는 수치해석 프로그램을 개발하는 것이다. 개발된 프로그램을 이용하여 비대칭과 대칭인 단동선형을 가진 서로 다른 두 가지 쌍동선에 대하여 수치계산을 수행하여 저항성능을 평가 하였다. 타당성 검증을 위해서 수치해석 결과 중 선수와 선미에서의 침하량, 트림 그리고 조파저항 계수를 수조모형시험 결과와 비교하였다. 이러한 비대칭 그리고 대칭 선형이 가지는 쌍동선의 유체역학적 특성에 관한 비교분석 자료는 향후 선형개발 시 충분한 활용 가치가 있다고 판단된다.

CONWIP is robust and efficient for various type of operating system, such as series, parallel, and assembly systems. Especially, assembly system would be controlled couple of modified CONWIP system. In the following paper, we developed Critical Path CONWIP system that gives signal to sub-line from a station of critical path then, compared with m-conwip, discrete-card-buffer CONWIP. 2 representative asymmetric assembly system models are used to compare each control system. As a result, critical path CONWIP holds less whole work-in-process with similar output. It can decrease total cost and WIP for high holding cost assembly system

The purpose of this paper is to suggest the strategical lifting postures able to alleviate imbalanced EMG amplitude leading to an increase in low back muscle fatigue while lifting asymmetric load dynamically. Eleven male subjects are required to lift symm

This study is aimed to show that an asymmetric load in the frontal plane leads to an increase in low back loading and fatigue in comparison with a symmetric load when workers lift an external weight by investigating previous studies and verifying the phen

Chemically stable Polyvinylidene fluoride-hexa-fluoropropane (PVDF-HFP) copolymer asymmetric membranes were prepared by the conventional phase inversion process, using Dimethyacetamide (DMAc) as a solvent and water as a non-solvent. To control the pore size and porosity of the PVDF-HFP membranes, tetra-ethoxysilane (TEOS) was used as a pore-forming agent. The prepared membranes were characterized, using several analytical methods such as Fourier Transform Infrared spectroscopy (FTIR), Thermo-gravimetric analyzer (TGA), Field Emission Scanning Electronic Microscopy (FESEM). TEOS turned out to increase porosity and make homogeneous pores on the membranes. Depending on the composition of the dope solutions, the pore size was ranged from 0.1 to 1.0 mum. The flux of the PVDF-HFP membranes prepared by using TEOS as a pore forming agent was increased substantially without much decrease in the rejection. When 15 wt% PVDF-HFP solution was blended with 13 wt% TEOS solution at composition ratio of 70/30 in wt%, the water flux at 2 bars was about 2 m3/m2day.

매립지나 유기성폐기물의 혐기성소화에서 발생되는 바이오 메탄가스 혼합물에서 이산화탄소를 제거하고 고농도의 메탄을 연료로 정제하는 기술은 온실가스의 저감과 신재생에너지 개발의 두 가지 장점을 함께 가지고 있다. 고분자 소재를 이용한 분리막기술은 메탄의 분리에 경제적으로 적용될 수 있는 기술이다. 본 연구에서는 이산화탄소/메탄의 선택도가 50, 이산화탄소의 투과도가 3.4 barrer로 알려진 폴리이서설폰[1]을 고분자 소재로 사용하고, 비용매 첨가제로 폴리이서설폰을 잘 팽윤시키는 아세톤의 함량을 달리하여 비대칭 중공사막을 제조하였다. 아세톤의 함량 9 wt%, 방사높이 10 cm, 4 wt% PDMS 코팅을 거친 폴리이서설폰 중공사막은 이산화탄소 투과도 36 GPU 및 이산화탄소/메탄 선택도 46의 우수한 성능을 나타내었다. 최적조건의 비대칭 폴리이서설폰 중공사막을 이용하여 제조된 모듈의 이산화탄소/메탄 순수가스 및 혼합가스 투과특성을 압력, 유입조성의 변화에 따라 관찰하여 분리막 공정을 구성한 결과 10 atm의 압력조건에서 95%의 메탄을 58%의 회수율로 얻을 수 있는 것으로 나타났다.

The principal objective of this study was to categorize service attributes on the basis of the asymmetric and non-linear relationship existing between service attributes and customer satisfaction. Researchers generally assume that service attribute performances and customer satisfaction are both symmetrical and linear. That is to say, improvements in attribute performance will inevitably result in increased customer satisfaction. However, this is not always the case. Certain attributes have been shown not to create satisfaction even when improved, and others do not create dissatisfaction even when their performance ratings become negative. Understanding this relationship is crucial not only to researchers, but also to service managers. Service managers can arrange their priorities with regard to which attributes must be improved or promoted first, in an environment of limited technical, financial, and human resources. Many studies into this asymmetric and non-linear relationship have recently been conducted, beginning with Herzberg's motivation-hygiene theory (1976) and the disconfirmation theory, which was eventually developed into Kano's model (1984). This study attempted to determine the impact level of service attributes on incidents of satisfaction or dissatisfaction. It used 30 service attributes generated by Park (2008) in the CIT research into family restaurants. The data were collected from 600 participants, 300 incidences of satisfaction and 300 incidents of dissatisfaction, via an online survey. The t-test was used to confirm the difference between the satisfaction group's and dissatisfaction group's attributes. 11 attributes were found to be significant at a level of p>0.05. This indicates that the 11 attributes exerted different impacts on satisfaction and dissatisfaction, which confirmed the asymmetric and non-linear relationship. 14 attributes were categorized into the core service, 1 attribute into the quality service, 7 attributes into the basic service, and 8 attributes into the neutral service. Strategic customer service management was recommended for the 'A' family restaurant as an example, on the basis of the asymmetric and non-linear relationship and the characteristics of the four service factors.