The composite photocatalysts of a Fe-modified carbon nanotube (CNT)-TiO2 were synthesized by a two-step sol-gel method at high temperature. Its chemical composition and surface properties were investigated by BET surface area, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD) and ultraviolet-visible (UV-Vis) spectroscopy. The results showed that the BET surface area was improved by modification of Fe, which was related to the adsorption capacity for each composite. Interesting thin layer aggregates of nanosized TiO2 were observed from TEM images, probably stabilized by the presence of CNT, and the surface and structural characterization of the samples was carried out. The XRD results showed that the Fe/CNT-TiO2 composites contained a mix of anatase and rutile forms of TiO2 particles when the precursor is TiOSO4·xH2O (TOS). An excellent photocatalytic activity of Fe/CNT-TiO2 was obtained for the degradation of methylene blue (MB) under visible light irradiation. It was considered that Fe cation could be doped into the matrix of TiO2, which could hinder the recombination rate of the excited electrons/holes. The photocatalytic activity of the composites was also found to depend on the presence of CNT. The synergistic effects among the Fe, CNT and TiO2 components were responsible for improving the visible light photocatalytic activity.

Expanded graphite (EG) is synthesized by chemical intercalation of natural graphite (NG) and rapid expansion at high temperature, with titanium n-butoxide (TNB) used as titanium source by a sol-gel method to prepare EG-TiO2 composite. The performances of the prepared EG-TiO2 composite are characterized by BET surface area measurement, scanning electron microscopy (SEM), X-ray diffraction patterns (XRD) and energy dispersive X-ray analysis (EDX). To compare the photocatalytic activities of the EG-TiO2 composite, three kinds of dye solutions, methylene blue (MB), methylene orange (MO) and rhodamine B (RhB), and two kinds of light source, UV light and visible light (VL), are used. Comparing the results, it can be clearly seen that the degradation of all of the dye solutions under irradiation by UV light is much better than that under irradiation by visible light, and the decomposition of MB solution was better than that of both of MO and RhB solution.

A visible-light photoactive photocatalyst was synthesized successfully by means of cogrinding of anatase- in ambient, followed by heat-treatment at in air environment. In general, it is well known that the grinding-operation induces phase transformation of a- to rutile . This study investigates the influence of the amount of gas on the phase transformation rate of a- and enhancement of visible-light photocatalytic activity, and also examines the relation between the photocatalytic activity and the period of grinding time. The phase transformation rate of a- to rutile is retarded with the amount of NH3 injected. And the visible-light photocatalytic activity of samples, was more closely related to the period of grinding time than amount injected, which means that the doping amount of nitrogen into more effective to mechanical energy than amount injected. XRD, XPS, FT-IR, UV-vis, Specific surface area (SSA), NOx decomposition techniques are employed to verify above results more clearly.

the less-reported gaseous studies have primarily dealt with chemical process stream concentrations than indoor air quality (IAQ) concentration levels. Accordingly, the current study was conducted to establish the feasibility of applying visible-light-induced TiO₂ doped with sulfur (S) element to cleanse toluene and ehtyl benzene at IAQ levels. The S-doped TiO₂ was prepared by applying two popular processes and two well-known methods. For both target compounds, the two coating methods exhibited different photocatalytic oxidation (PCO) efficiency. Similarly, the two S-doping processes showed different PCO efficiency. These results indicate that the coating method and doping process are important parameters which can influence PCO efficiency. Meanwhile, it was found that the PCO efficiency of ethyl benzene was higher than that of toluene. In addition, the degradation efficiency of the target compounds increased as the relative humidity (RH) decreased. The PCO efficiency varied from 44% to 74% for toluene and from 68% to 95%, as the RH decreased. Consequently, it is suggested that with appropriate RH conditions, the visible-light-assisted photocatalytic systems can also become an important tool for improving IAQ.

The field of photocatalysis is one of the fastest growing areas both in research and commercial fields. Titanium dioxide is the most investigated semi-conductor material for the photocatalysis applications. Research to achieve TiO2 visible light activation has drawn enormous attentions because of its potential to use solar light. This paper reviews the attempts made to extend its visible photocatalytic activity by carbon doping. Various approaches adopted to incorporate carbon to TiO2 are summarized highlighting the major developments in this active research field. Theoretical features on carbon doping are also presented. Future scenario in the rapidly developing and exciting area is outlined for practical applications with solar light.

It prepared the TiO2 powder which has photo-catalytic activity in the visible-light by the wet process with titanium oxysulfate. The titanium dioxide(TiO2) by the wet process creates a new absorption band in the visible light region, and is expected to create photocatalytic activity in this region. Anatase TiO2 powder which has photocatalytic activity in the visible light region, is treated using microwave and radio-frequency(RF) plasma. But, the TiO2 powder for the visible light region, which also can be easily produced by wet process. The wet process TiO2 absorbed visible light between 400nm and 600nm, and showed a high activity in this region, as measured by the oxidation removal of aceton from the gas phase. The AH-380 sample appears the yellow color to be strong, the catalytic activity in the visible ray was excellent in comparison with the plasma-treated TiO2. The AH-380 TiO2 powder, which can be easily produced on a large scale, is expected to have higher efficiency in utilizing solar energy than the plasma-treated TiO2 powder.

염산매질에서 산화/환원제를 사용하여 Pu 산화수를 조절한 후, UV-Visible-Near IR 분광기를 이용하여 Pu(III, IV, V, VI) 산화수에 대한 흡수스펙트럼을 측정하여 그 분광학적 특성을 고찰하였다. Pu(III)으로 조절하기 위하여 환원제인 HCl를 사용하였으며, Pu(IV)와 Pu(VI)로 조절하기 위하여 산화제인 및 를 각각 사용하였다. 또한 Pu(VI)로 조절된 용액에 환원제인 HCl를 사용하여 Pu(V)로 조절하였다. Pu(III)와 Pu(IV)의 대표적인 흡수피크는 470 nm 및 600 nm에서 각각 관찰되었고, Pu(VI)와 Pu(V)의 특성피크는 830 nm 및 1135nm에서 각각 관찰되었다. Pu(III, IV, VI) 산화상태의 시간 경과에 따른 흡수스펙트럼 변화는 관찰되지 않았으나 Pu(V)의 경우 매우 불안정하여 생성되자 마자 Pu(III)로 변화되었다.

곁뿌림 산지초지의 조성, 수량, 식생 및 목초품질 등에 미치는 3요소(:0-0-0; 0-10-10; 6-15-15; 12-20-20; 24-25-20 kg/l0a/year)와 소석회 (0, 250kg/10a; 조성시만 시용)의 시용효과를 구명하는 10년간 시험후, 별도로 사심별 토괴의 화학성 등을 조사하였으며, 본보에서는 치환성 체기간 다양한 상호비율 및 사괴 보존성의 가시적 변화를 검토하였다. 1. 사괴비옥도 특성 및 grass tetany 임계수준과

SiH4를 반응물질로 사용하여 electron cyclotron resonance plasma enhanced chemical vapor deposition(ECR-PECVD)로 실리콘 기판위에 증착한 수소화 비정질 실리콘(a-Si:H)으로부터 가시 photoluminescence(PL) 가 관찰되었다. a-si:H/Si로 부터의 PL은 다공질실리콘으로부터의 PL과 유사하였다. 급속열처리에 의해 500˚C에서 2분간 산소분위기에서 어닐링된 시편의 수소함량은 1~2%로 줄어들었고 시편은 가시 PL을 보여주지 않았는데 이는 a-Si:H의 PL과정에서 수소가 중요한 역할을 한다는 것을 뜻한다. 증착된 a-Si:H의 두께가 증가함에 따라 PL의 세기는 감소하였다. SiH4를 사용하여 ECR-PECVD에 의해 Si상에 증착된 a-Si:H로부터의 가시 PL은 Si과 증착된 a-Si:H막 사이에 증착이 이루어지는 동안에 형성된 수소화실리콘으로부터 나오는 것으로 추론된다.

I have developed a UV and visible spectroscopic database (UVSD) for atoms and molecules, which are found in interstellar medium, stars, galaxies, and in the atmospheres of the earth, planets, satellites, and comets. This UV and visible database, which is machine-readable, consists of three different sub-databases depending upon the characteristics of the sub-databases: (A) atomic and molecular line listings from laboratory observations or theoretical studies; (B) absorption spectra measured in laboratories; and (C) solar UV, visible, and infrared spectral atlases. The UVSD is in a very initial stage of development compared with other well organized and established infrared and microwave databases. In order to make a good quality and complete database, substantial efforts should be made for the acquisition of scattered important data from laboratories or institutions, and then the acquired heterogeneous data should be peer-reviewed and standardized.

설령 엘리엇 자신도 네 사중주를 자신의 최고의 걸작으로 간주했지 만 실제 우리가 이 작품을 정확하게 감상하기란 결코 쉽지 않다. 이 작 품만이 지닌 철학적․종교적 사상이 그 난해함을 가중시키고 있다. 그 래서 본 글은 네 사중주를 통하여 우리 인간의 영혼계에 초점을 맞추 었다. 즉, 우리 인간의 영혼의 이동 모습을 고찰해 본 것이다. 우리 인 간의 영혼은 물리적/ 물질적 세계에서 영적/비가시적 세계로의 이동이 가능하다. 그것을 위한 최우선 조건이 바로 자기를 부정하는 것이며 아 울러 예수 그리스도의 성육화와 사랑 등이 그 중심을 차지하고 있다.

The auroral observation has been started at Jang Bogo Station (JBS), Antarctica by using a visible All-sky camera (v-ASC) in 2018 to routinely monitor the aurora in association with the simultaneous observations of the ionosphere, thermosphere and magnetosphere at the station. In this article, the auroral observations are introduced with the analysis procedure to recognize the aurora from the v-ASC image data and to compute the auroral occurrences and the initial results on their spatial and temporal distributions are presented. The auroral occurrences are mostly confined to the northern horizon in the evening sector and extend to the zenith from the northwest to cover almost the entire sky disk over JBS at around 08 MLT (magnetic local time; 03 LT) and then retract to the northeast in the morning sector. At near the magnetic local noon, the occurrences are horizontally distributed in the northern sky disk, which shows the auroral occurrences in the cusp region. The results of the auroral occurrences indicate that JBS is located most of the time in the polar cap near the poleward boundary of the auroral oval in the nightside and approaches closer to the oval in the morning sector. At around 08 MLT (03 LT), JBS is located within the auroral oval and then moves away from it, finally being located in the cusp region at the magnetic local noon, which indicates that the location of JBS turns out to be ideal to investigate the variabilities of the poleward boundary of the auroral oval from long-term observations of the auroral occurrences. The future plan for the ground auroral observations near JBS is presented.

이 논문의 목적은 16세기 메노나이트 지도자였던 더크 필립스의 사상을 밝히고 그의 중심 사상을 논의함으로 그의 기독론이 보이는 교회에 관한 관점과 연결되어 있음을 밝히는 것이다. 먼저 더크 필립스의 생애를 간략하게 다룰 것인데 이를 통해 그의 신학의 형성과정과 그의 사역 환경을 이해하는 데 도움이 될 것이다. 더크는 동시대의 다른 종교개혁 지도자들과 달리 매우 독특한 기독론 (호프만의 ‘천상의 육체론’을 기본으로 한)을 발전시켰기 때문에 기독론은 그의 신학을 이해하는데 매우 중요한 틀이라고 할 수 있다. 더크에 관한 지금까지의 연구에서도 그의 기독론을 그의 사상을 이해하는데 핵심 신학으로 여겨져 왔으며 실제로 더크의 저작의 분량에서도 기독론의 비중이 높은 것이 사실이다. 그러나 이 논문에서는 그의 기독론이 그의 보이는 교회의 관점과 긴밀한 관련이 있다는 것을 밝히며 이러한 관점에서 그의 기독론을 이해하고자 한다. 예를 들면, 더크의 기독론 안에 성육신의 논의가 신학적으로도 의미가 있지만, 그는 성육신의 교리는 신자들이 거룩한 삶을 살기 위한 측면에서 매우 중요한 것으로 이해하며 성육신은 인간의 그리스도 안에 거룩한 본성을 갖도록 하는 데 중요하다는 것을 강조한다.

This study evaluated the photocatalytic oxidation efficiency of volatile organic compounds by Cu2O -TiO2 under visible-light irradiation. Cu2O-TiO2 was synthesized by an ultrasonic-assisted method. The XRD result indicated successful p-n type photocatalysts. However, no diffraction peaks belonging to TiO2 were observed for the Cu2O-TiO2. The Uv-vis spectra result revealed that the synthesized Cu2O-TiO2 can be activated under visible-light irradiation. The FE-TEM/EDS result showed the formation of synthesized nanocomposites in the commercial P25 TiO2, the undoped TiO2, and Cu2O-TiO2 and componential analysis in the undoped TiO2 and Cu2O-TiO2. The photocatalytic oxidation efficiencies of benzene, toluene, ethylbenzene, and o-xylene with Cu2O-TiO2 were higher than those of P25 TiO2 and undoped TiO2. These results indicate that the prepared Cu2O-TiO2 photocatalyst can be applied effectively to control gaseous BTEX.

In this study, we evaluated the photocatalytic oxidation efficiency of aromatic volatile hydrocarbons by using WO3–doped TiO2 nanotubes (WTNTs) under visible-light irradiation. One-dimensional WTNTs were synthesized by ultrasonic-assisted hydrothermal method and impregnation. XRD analysis revealed successful incorporation of WO3 into TiO2 nanotube (TNT) structures. UV-Vis spectra exhibited that the synthesized WTNT samples can be activated under visible light irradiation. FE-SEM and TEM images showed the one-dimensional structure of the prepared TNTs and WTNTs. The photocatalytic oxidation efficiencies of toluene, ethylbenzene, and o-xylene were higher using WTNT samples than undoped TNT. These results were explained based on the charge separation ability, adsorption capability, and light absorption of the sample photocatalysts. Among the different light sources, light-emitting-diodes (LEDs) are more highly energy-efficient than 8-W daylight used for the photocatalytic oxidation of toluene, ethylbenzene, and o-xylene, though the photocatalytic oxidation efficiency is higher for 8-W daylight.