The size of crystallites in mono-dispersed cubic silver bromide grains was measured by applying a powder X-ray diffraction method and Scherrer's equation to grains that were suspended in swollen gelatin layers. In order to evaluate the existence of defects, the measured crystallite size was compared to those measured by using a scanning electron microscope. In the case of the grains prepared by the controlled double jet method, the size of crystallites was equal to the edge length of the grains that had edge lengths smaller than 400 nm. This result proved the usefulness of the above-stated method for measuring the size of crystallites and also evaluating the presence of any crystal defect in each grain. In the case of the grains, which were precipitated in the presence of a sensitizing dye and potassium iodide, the size of crystallites was smaller than the edge's length, indicating the discontinuities in the grains introduced during the precipitation process.

A study of fracture to material is getting interest in nuclear and aerospace industry as a viewpoint of safety. Acoustic emission (AE) is a non-destructive testing and new technology to evaluate safety on structures. In previous research continuously, all tensile tests on the pre-defected coupons were performed using the universal testing machine, which machine crosshead was move at a constant speed of 5mm/min. This study is to evaluate an AE source characterization of SM45C steel by using k-nearest neighbor classifier, k-NNC. For this, we used K-means clustering as an unsupervised learning method for obtained multi -variate AE main data sets, and we applied k-NNC as a supervised learning pattern recognition algorithm for obtained multi-variate AE working data sets. As a result, the criteria of Wilk's λ, D&B(Rij) & Tou are discussed.

우리나라는 2000년에 제조물책임법이 제정하여 2002년 7월 1일부터 시행하였으며, 제조물의 제조, 설계, 표시등의 결함으로 인하여 발생한 손해에 대한 제조업자 등의 손해 배상책임을 규정하고 소비자의 결함 입증부담 경감과 피해자의 보호를 도모하자 하고 있다. 제조물의 표시등의 결함은 지시결함이나 경고결함에 관한 것으로 제조자는 그 위험에 의한 사고를 방지 회피할 수 있도록 소비자에게 정보를 제공하여야 하나 이를 이행하지 않아 발생된 결함이다. 본 논문에서는 A사(社)의 공기정화기 B모델 사용설명서에 나타난 정보제공사항을 주의 경고표시 가이드 등에 따라 검토하였으며, 그 결과 일부 지시 및 경고사항에서 보완해야할 사항이 발견하였다. 보완사항은 제안사항으로 기업내부 에서 처리하되 전문성이 부족한 분야는 외부의 PL전문가의 협력하에 바람직한 개선안이 도출될 수 있을 것이다.

The mechanical property of a phosphore layer was investigated by measuring the resolution (LP/mm) and by positron annihilation spectroscopy and SEM. Image plate samples containing the phosphore layer were irradiated by X-rays in a hospital numerous times over a course of several years. The LP/mm values of a (Ba,Sr)FBr : Eu image plate irradiated by X-rays varied between 2.2 and 2.0 over a period of four years. Coincidence Doppler Broadening (CDB) positron annihilation spectroscopy was used to analyze defect structures. The S parameters of the samples from hospital use varied from 0.6219 to 0.6232. There was a positive relationship between the time of exposure to the X-rays and the S parameters. Most of the defects were found to have been generated by X-rays.

It prepared the TiO2 powder which has photo-catalytic activity in the visible-light by the wet process with titanium oxysulfate. The titanium dioxide(TiO2) by the wet process creates a new absorption band in the visible light region, and is expected to create photocatalytic activity in this region. Anatase TiO2 powder which has photocatalytic activity in the visible light region, is treated using microwave and radio-frequency(RF) plasma. But, the TiO2 powder for the visible light region, which also can be easily produced by wet process. The wet process TiO2 absorbed visible light between 400nm and 600nm, and showed a high activity in this region, as measured by the oxidation removal of aceton from the gas phase. The AH-380 sample appears the yellow color to be strong, the catalytic activity in the visible ray was excellent in comparison with the plasma-treated TiO2. The AH-380 TiO2 powder, which can be easily produced on a large scale, is expected to have higher efficiency in utilizing solar energy than the plasma-treated TiO2 powder.

The purpose of this study was to analyze the presence of ipsilesional movement deficit, with segmental performance in each proximal or distal upper extremity. The visuoperceptual complex task of the ipsilesional upper extremity was investigated in patients with unilateral brain damage and a control group of healthy sex-age-matched controls. Tracking movements were tested in the proximal and distal upper extremities. Movements were measured by the accuracy index, which was normalized to each subject's own range of motion and took into account any differences between subjects in the excursion of the tracking target. The findings revealed that stroke patients experienced difficulties with tracking movement of both proximal and distal segments in the upper extremities on the so-called "non-affected side", irrespectively of the extent of patient's age, time since onset, or severity of contralateral upper extremity. Therefore, the unilateral brain damage affected ipsilateral motor function of the proximal and distal upper limbs in the performance of complex motor tasks, requiring central processing and the higher order cognitive function in the integrity of both hemispheres.

본 연구에서는 경계 요소법을 이용하여 2차원 비등방성 탄성체의 손상 규명을 수행한다. 경계에서의 적분항만을 포함하는 본 수치모델은 1차원으로 줄게된다. 이러한 장점은 특히 균열 역학과 같은 문제에 있어서 중요한 의미를 갖는다. 또한 일정 영역을 분할하는 기법을 피함으로서 수치해석 과정을 간편하고 효율적으로 수행할수 있기 때문에 역문제 해결에 있어서 장점을 갖는다. 본 연구에서는 기존의 등방성 재료에 대한 비파괴 추정기법을 복합신소재와 같은 비등방성 재료로 이루어진 탄성체의 해석에 대하여 확장한다. 먼저 경계요소법에 의한 수치모델의 타당성을 기존의 문헌과 비교 검증하며, 서로 다른 특성을 보이는 비등방성 형식의 변화에 따라 실제 측정시 발생하는 노이즈 영향을 분석한다. 수치예제는 적층 형태 및 하중조건에 대하여 수행하며, 결함 추정에 미치는 적층 형태의 영향을 시험한다.