검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 170

        61.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study is aimed to examine the influence of the rotational stiffness of U-shaped ribs on the local buckling behaviors of laminated composite plates. Applying the orthotropic plates with eight layers of the layup [(0°)4]s and [(0°/90°)2]s, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. There is a need to develope a simple design equation to establish the rotational stiffness effect, which could be easily quantified by comparing the theoretical critical stress equation for laminated composite plates with elastic restraints based on the Classical laminated plate theory. Through the parametric numerical studies, it is confirmed that there should clearly exist an increasing effect of local plate buckling strength due to the rotational stiffness by closed-section ribs. An applicable coefficient for practical design should be verified and proposed for future study. This study will contribute to the future study for establishing an increasing coefficient for the design strength and optimum design of U-rib stiffened plates.
        4,000원
        62.
        2013.04 구독 인증기관 무료, 개인회원 유료
        This study is aimed to examine the influence of the rotational stiffness of U-shaped ribs on the local buckling behaviors of laminated composite plates. Applying the orthotropic plates with eight layers of the layup [(0°)4]s and [(0°/90°)2]s, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. There is a need to develope a simple design equation to establish the rotational stiffness effect, which could be easily quantified by comparing the theoretical critical stress equation for laminated composite plates with elastic restraints based on the Classical laminated plate theory. This study will contribute to the future study for evaluating the design strength and optimum design of U-rib stiffened plates.
        3,000원
        63.
        2013.04 구독 인증기관 무료, 개인회원 유료
        Concrete and steel has been used as the main material of structure from building and drainage pipe. However, many problems such as corrosion and rupture had occurred in the Water Supply and the Sewer System. Additionally, the government has invested big budget to Deteriorated pipe replacement and maintenance. Replacement of existing pipelines in order to solve these problems, GFRP pipe(glass fiber composite material pipes) is aspiring to replace the tube. GFRP has high strength, restore performance, durable and lightweight properties. However, high strength GFRP pipe is weak in buckling problem. This study is to analysis Optimization Design models for resisting bucking problem of GFRP pipes. Thus, various tests Changed the angle of Glass-Fiber-Reinforced Layer and the resin content of resin-mortar were performed for GFRP pipes to estimate material characteristics of GFRP in this study. Buckling analysis of composite structures under external uniform pressure was performed with the results obtained through test.
        3,000원
        66.
        2012.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: This study is to investigate the mechanical performance of the fiber reinforced lean concrete with respect to different types of fibers. METHODS: Increased vehicle weight and other causes from the exposed conditions have accelerated the deteriorations of road pavement. A new multi-functional composite pavement system is being developed recently in order to extend service life and upgrade the pavement. A variety of tests were conducted before and after hardening of the concrete. RESULTS: From the test results, it was found that the use of different types of fibers did not affect the compressive strength development. This might be due to the inherent property of the lean concrete. When steel fibers were used relatively greater flexural strength and flexural fracture toughness were developed. Also addition of fly ash by replacing a part of Portland cement the fracture toughness was slightly increased. CONCLUSIONS: It has been known that the addition of fibers and use of mineral admixture can be positively considered in the development of multi-functional composite pavement system as its required mechanical performance is obtained.
        4,000원
        67.
        2012.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 유리단섬유로 보강된 분사식 섬유보강 복합재료의 인장거동 평가를 위한 실험 및 해석연구를 수행하였다. 이를 위해 다양한 변형율속도(strain rate)에 따른 에폭시수지 및 분사식 섬유보강 복합재료의 인장강도 실험을 수행하였다. 본 연구에 사용된 분사식 섬유보강 복합재료는 15mm 길이로 절단된 유리단섬유가 25% 부피비율로 혼입된 보수·보강용 재 료이다. 에폭시수지의 점탄성 특성을 고려하기 위해 역산모델링(inverse simulation)을 수행하여 변형율속도에 따른 점성변화 를 함수식으로 제안하였다. 역산모델링을 통해 제안된 함수식을 미세역학 기반의 점탄성 손상모델(micromechanics-based viscoelastic damage model; Yang et al., 2012)에 적용하여 분사식 섬유보강 복합재료의 인장거동을 수치적으로 해석하였다. 분사식 섬유보강 복합재료의 인장거동 해석결과와 실험결과를 비교하여 미세역학 기반의 점탄성 손상모델의 정확성을 검증 하였다.
        4,000원
        68.
        2012.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, composite laminate cantilever type cylindrical shells with edge-stiffeners are analyzed. A versatile 4-node flat shell element which is useful for the analysis of shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. Two models by load conditions are considered. Load type A and B are loaded by point load at the free edge and line load respectively. A various parameter examples are presented to obtain proper stiffened length and stiffened thickness of edge-stiffeners. It is shown that the thickness of shell can be reduced minimum 30% by appropriate edge-stiffeners.
        4,000원
        69.
        2012.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study proposes flexural failure design criteria of continuous slabs enhanced by a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC). The proposed hybrid retrofit system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. The neutral axis of the enhanced sections in positive moment zone at flexural failure is enforced to be in UHPC overlay for preventing the compression in FRP. From this condition, a relationship between design parameters of FRP and UHPC is established. Although the capacity of the proposed retrofit system to enhance flexural strength and ductility is confirmed through experiments of one-way RC slabs having two continuous spans, the retrofitted slabs failed in shear. To prevent this shear failure, a design criteria of flexural failure is proposed.
        4,000원
        70.
        2012.04 구독 인증기관·개인회원 무료
        This study proposes a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC) to enhance flexural strength of existing reinforced concrete (RC) slabs. The proposed system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. Moreover, to prevent the compression in FRP of the enhanced sections in positive moment zone at flexural failure, neutral axis of the sections at failure is enforced to be in UHPC overlay. From this condition, a relationship between design parameters of FRP and UHPC is established.
        71.
        2012.04 구독 인증기관·개인회원 무료
        Even though the longitudinally stiffened laminated composite plates with closed section ribs should be an effective system for axially compressed members, the existing researches on the applications of closed-section ribs, especially for the laminated composite plates, are not sufficient. This study is aimed to examine the influence of the sectional stiffness of U-shaped ribs on the buckling modes and strengths of laminated composite plates. Applying the orthotropic plates with eight layers of the layup [(0°)4]s and [(0°/90°)2]s, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. From the parametric studies, the minimum required ply thicknesses as well as the buckling strengths were presented for the analysis models. The buckling strengths were compared with the theoretical critical stress equation for simply supported plates based on the Classical laminated plate theory. This study will contribute to the future study for evaluating the minimum required stiffness and optimum design of U-rib stiffened plates
        72.
        2012.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        압축을 받는 복합적층판의 보강을 위해 폐단면리브를 적용하는 것이 효과적이나, 적정 크기나 최적 두께에 대한 충분한 연구자료가 제시되지 못하고 있다. 이에 따라 폐단면리브 단면 제원에 따른 복합적층판의 압축좌굴 거동에 대한 영향이 우선 검토되어야 할 필요성이 있다. 본 논문에서는 직교이방성 [(0°)4]s와 Cross-ply [(0°/90°)2]s 적 층단면을 각각 고려하여 U리브 단면강성에 따른 복합적층 보강판의 탄성좌굴강도 및 좌굴모드의 변화를 수치해석 적으로 검토하였다. 구조부재로써 적용성을 고려하여 U리브 단면 모델을 선정하였고 유한요소해석 프로그램인 ABAQUS를 이용하여 U리브 적층두께에 따른 고유치 해석을 실시하였다. U리브와 같은 폐단면 보강재를 적용한 복 합적층판에서는 단순지지 조건의 판좌굴 강도에 비해 상승효과가 있음이 본 연구의 수치해석 결과로부터 입증되었 으며 본 해석연구 대상 모델에 대해 U리브 최적 적층두께를 분석하였다. 본 논문의 연구 결과는 향후 U리브의 최 적 단면 선정방안을 제시하는데 기여할 수 있을 것으로 기대된다.
        4,000원
        73.
        2010.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper, the analysis of impact damage behavior of a reinforced concrete structure that undergoes both a shock impulsive loading and an impact loading due to the air blast induced from an explosion is performed. Firstly, a pair of multiple loadings are selected from the scenario that an imaginary explosion accident is assumed. The RC structures strengthened with advanced composite materials (ACM) are considered as a scheme for retrofitting RC wall structures subjected to multiple explosive loadings and then the evaluation of the resistant performance against them is presented in comparison with the result of the evaluation of a RC structure without a retrofit. Also, in order to derive the result of the analysis similar to that of real explosion experiments, which require the vast investment and expense for facilities, the constitutive equation and the equation of state (EOS) which can describe the real impact and shock phenomena accurately are included with them. In addition, the numerical simulations of two concrete structures are achieved using AUTODYN-3D, an explicit analysis program, in order to prove the retrofit performance of a ACM-strengthened RC wall structure.
        4,000원
        74.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문은 복합재료 패널로 보강된 철근 콘크리트 보의 휨 실험과 해석을 통하여 패널의 보강효과에 대하여 알아보고자 한다. FRP 복합재료 패널은 전통적인 재료인 강재와 콘크리트에 비해 단위 무게당 강도 및 강성이 크고 부식에 대한 높은 저항성, 절연성, 고내구성 및 낮은 열전도성 등 우수한 물성으로 유지관리 측면에서 매우 유리하여 최근 많은 연구가 이루어지고 있다. 따라서 본 연구에서는 범용 유한요소 해석 프로그램인 ABAQUS를 이용하여 복합재료 패널로 보강된 철근 콘크리트 보의 극한 하중을 예측하고 실험을 수행하여 그 보강효과에 대한 고찰하였다. 복합재료 패널은 복합재료 패널 층의 유리섬유직조 형태에 따라 LT, DB, DBT로 구분하고 복합재료 패널의 층 개수에 따라 2ply, 3ply로 구분하였다. 실험을 수행한 결과, 해석과 일치하였으며 복합재료 패널로 보강한 철근 콘크리트 보가 극 한강도 측면에서 효율적이었다는 결론도 얻었다.
        4,000원
        75.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 차량 이동하중을 받는 손상된 콘크리트 슬래브교량의 강성저하를 규명하고, 복합신소재를 사용하여 보강 후 성능평가를 수행한다. 특히 마이크로 유전알고리즘에 의한 역해석에 기반하여 보강 전·후 각 요소에서의 강성변 화를 수정된 2차변수 Gaussian 분포함수를 사용하여 정식화하였다. 본 연구에서 제안한 방법은 기존의 요소기반 접 근 방식에 비하여 수치해석적인 관점에서 효율성을 갖는다. 개발한 알고리즘은 3차원 솔리드 요소를 사용하여 모델 링한 교량의 동적 거동 시뮬레이션으로부터 계측한 데이터를 사전정보로 사용하여 검증하였다. 몇 가지 수치예제는 본 연구에서 개발한 방법이 실제교량과 수치모델간의 차이로 인한 오차 및 노이즈 등으로 인한 동적 계측치 오류 등이 고려되었음에도 강성분포 추정 및 성능 평가를 효율적으로 수행함을 보여준다.
        4,000원
        77.
        2008.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        철근콘크리트 보에 대한 섬유-강판 복합플레이트의 보강효과를 연구하였다. 합계 12개 철근콘크리트 보 중, 7개는 탄소 섬유-강판 복합플레이트(CSP)로 보강되었으며, 4개는 유리섬유-강판 복합플레이트(GSP)로 보강되었고, 나머지 1개는 비교를 목적으로 보강되지 않았다. 보강보 실험결과, 새로 개발된 섬유-강판 복합플레이트 보강시스템은 보강재의 조기탈락을 제어하여 연성파괴를 유도하는 것으로 나타났다. 본 연구에 사용된 CSP 보강보의 연성지수는 GSP 보강보의 연성지수는 로 측정되었다. ESP 보강보 및 GSP 보강보의 최대하중은 보강하지 않은 기준보에 비해 각각 115%, 107% 향상된 것으로 측정되었다. 또한, 보강보 실험과 해석 결과들은 잘 일치하는 것으로 나타났다.
        4,000원
        78.
        2003.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Steel, concrete and their combination materials are the most 6commonly used materials for civil engineering structural systems such as buildings, bridge structures and other structures. Recently, however, fiber reinforced polymer (FRP) composites, a relatively new composite material made of fibers and polymer resins, have been gradually used in structural systems as an alternative structural material. This paper describes a comparison of design strength equations for steel column and FRP composite column based on design philosophies. The safety factors used in allowable stress design (ASD) are relatively higher in FRP structural design than steel structural design. Column critical stress equations of FRP composites column from an experimental study can be represented by Euler elastic buckling equation at the long-range of slenderness, and an exponential form at the short-range of slenderness as defined in Load and Resistance Factor Design (LRFD) of steel column. The column strength of steel and FRP composite columns in large slenderness is independent of material strength, this result verified the elastic buckling equation as derived by Eq. (15) and Eq. (5).
        4,000원
        79.
        2001.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        SiC 보강재 표면에 도금된 Cu금속층이 Al/SiC복합재료의 젖음성에 미치는 영향을 검토하였다. 보강재에 대한 금속층의 도금은 무전해도금법을 이용하였으며, Al/SiC 복합재료의 제조는 텅스텐 발열체 진공로의 670˚C~900˚C에서 제조하여 보강재와 기지간의 접촉부위를 촬영하여 젖음성을 측정하였다 젖음성 측정 결과 보강재에 도금된 Cu층은 젖음성을 향상시켰고, 젖음성의 개선은 보강재에 도금된 금속층과 기지간의 반응에 의해 계면에너지를 변화시킴으로서 나타난 결과이며. 반응을 통한 산화피막의 배제도 영향을 미친 것으로 판단된다
        4,000원
        80.
        2000.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Al2O3SiC particle was prepared was prepared by the self-propagting high temperature sYthesis(SHS) process from a mixture of SiO2, Al and C powders, The fabricated Al2O3SiC particle was applied to 2024Al/(Al2O3SiC)pcomposite as a reinforcement. Aluminum matix composites were fabricares by the powder extrusion method using the synthesized Al2O3SiC particle and commercial 2024Al powder. Theoptimum preparation conditions for Al2O3SiC partticle by SHS process were described. The influence of the Al2O3SiC voiume fraction on the mechanical was composite was also discussed. Despite adiabatic temperature was about 2367K, SHs reaction was completed not by itself, but by using pre-heating. Mean particle size of final particle synthesized was 0.73 m and most of the particle was smaller than 2m. Elastic modulus and tensile strength of the composite increased with increase the volume fraction of reinforcement but, tensile strength depreciated at 30 vol% of reinforcement.
        4,000원
        1 2 3 4 5