We investigate the austenite stability in nanocrystalline Fe-7%Mn-X%Mo (X = 0, 1, and 2) alloys fabricated by spark plasma sintering. Mo is known as a ferrite stabilizing element, whereas Mn is an austenite stabilizing element, and many studies have focused on the effect of Mn addition on austenite stability. Herein, the volume fraction of austenite in nanocrystalline Fe-7%Mn alloys with different Mo contents is measured using X-ray diffraction. Using a disk compressive test, austenite in Fe–Mn–Mo alloys is confirmed to transform into strain-induced martensite during plastic deformation by a disk d. The variation in austenite stability in response to the addition of Mo is quantitatively evaluated by comparing the k-parameters of the kinetic equation for the strain-induced martensite transformation.

붕어(무게 28.1±3.7 g, 길이 10.0±1.0 cm)에 0, 2.0×104, 2.0×105, 2.0×106, 2.0×107 CFU/ml의 Aeromonas hydrophila를 주사 후 2주간 실험을 실시하였다. A. hydrophila로 인위감염한 Carassius carassius의 2주 뒤 반수치사농도는 19.776×105 CFU/ml이었다. 혈액학적 지표에서는 A. hydrophila에 의해 혈색소와 적혈구 수가 유의하게 감소한 반면, 적혈구 용적은 유의적 변 화가 없었다. 마그네슘, 칼슘과 같은 혈장 무기 성분은 유의적으로 감소하였다. 유기 혈장 성분 에서 A. hydrophila 인위감염에 의해 혈장 포도당과 콜레스테롤이 유의하게 증가한 반면, 총 단 백질은 유의하게 감소하였다. 혈장 효소 성분인 ALP는 A. hydrophila 인위감염에 의해 유의하 게 증가하였다. 본 연구의 결과는 C. carassius에 대한 A. hydrophila의 인위감염이 치명적인 병원성 세균으로 혈액학적 성상 및 혈장 성분에 유의한 생리학적 변화를 유도하였음을 의미 한다.

붕어(무게 42.4 ± 9.0 g, 길이 15.0 ± 1.0 cm)를 96시간 동안 0, 5, 10, 20, 40 및 80 mg Zn2+/l의 수 인성 아연에 노출시켰다. 수인성 아연에 노출된 붕어의 96시간 반수치사농도(LC50)는 51.58 mg Zn2+/l였다. 혈액학적 지표에서 48시간에 40 mg Zn2+/l 농도에서 RBC 수치가 유의하게 감소 한 반면, 헤마토크릿은 아연 노출에 의해 유의하게 증가하였다. MCV (μl)와 MCH (pg)는 40 mg Zn2+/l 농도에서 48시간에 유의하게 증가하였다. 칼슘, 마그네슘, 포도당, 콜레스테롤, 총 단백질 및 ALT와 같은 혈장 성분은 아연 노출에 의해 크게 변화되었다. 본 연구의 결과는 붕어에 대한 아연 노출이 독성으로서 혈액학적 매개변수 및 혈장 성분의 유의한 생리학적 변화를 유발함을 시사한다.

본 실험은 붕어(Crucian carp, Carassius carassius)(무게 39.7±3.1 g, 전장 14.8±0.5 cm)의 수인 성 니켈 0, 10, 20, 40, 80 및 160 mg Ni2+/l 농도로 96시간 급성 노출을 실시하였다. 수인성 니 켈에 노출된 붕어의 반수치사농도(LC50)는 117.69 mg Ni2+/l으로 나타났다. 혈액학적 성상에서 RBC count는 수인성 니켈 96시간 급성 노출 중 48시간에서 유의적으로 증가한 반면, 96시간에 서 유의적 감소가 나타났다. MCV와 MCH는 96시간에서 80 mg Ni2+/l 농도에서 유의적으로 증 가했다. Calcium, magnesium, glucose, cholesterol, total protein, AST, ALT 및 ALP 와 같은 혈장 성분은 수인성 니켈 노출에 의해 유의적 변화가 나타났다. 이 연구의 결과는 수인성 니켈 노출 에 따른 붕어의 생존율, 혈액학적 성상 및 혈장 성분의 변화를 확인하고 이는 수인성 니켈의 독성에 의한 것으로 판단했다.

Over the past decade, platelet-rich plasma (PRP) and platelet derivatives have been widely investigated in the field of regenerative medicine due to their high concentrations of platelet- related growth factors, cytokines, and other proteins. Recently, many clinical studies have suggested their regenerative therapeutic efficacy in treating several disorders in medical field. However, their therapeutic applications are not well characterized in veterinary medicine as in human and experimental animals. This article reviews functional roles of platelets, scientific concepts, and clinical use of PRP and platelet derivatives in veterinary medicine. It also presents guidelines for veterinary applications of PRP in the future.

Sealing treatment is a post-surface treatment of the plasma spray coating process to improve the corrosion resistance of the coating material. In this study, the effect of the sealing on the corrosion resistance and adhesive strength of the plasma spray-coated alumina coatings was analyzed. For sealing, an epoxy resin was applied to the surface of the coated specimen using a brush. The coated specimen was subjected to a salt spray test for up to 48 hours and microstructural analysis revealed that corrosion in the coating layer/base material interface was suppressed due to the resin sealing. Measurement of the adhesive strength of the specimens subjected to the salt spray test indicated that the adhesive strength of the sealed specimens remained higher than that of the unsealed specimens. In conclusion, the resin sealing treatment for the plasma spray-coated alumina coatings is an effective method for suppressing corrosion in the coating layer/base material interface and maintaining high adhesive strength.

Plasma Arc Melter (MSO) system has been developed for the treatment and the stabilization of various kinds of hazardous and radioactive waste into the readily disposable solidification products. Molten salt oxidation system has been developed for the for the treatment of halogen- and sulfurbearing hazardous and radioactive waste without emissions of PCDD/Fs and acid gases. However, PAM system has showed some difficulty in the off-gas treatment system due to the volatilization of radionuclides and toxic metals at extremely high-temperature plasma arc melter and the emissions of acid gases. MSO system has also showed the difficulty in the treatment of spent molten salt into the disposable waste form. Present study discussed the results of organics destruction performance tests for the PAM-MSO combination system, which is proposed and developed to compensate the drawbacks of each system. The worst-case condition tests for the organics destruction were conducted at lowest temperatures and the worst-case condition tests for the retention of metals and radionuclides were conducted at highested temperatures under the range of normal operating condition. For the worst-case organic destruction test, C6H5Cl was selected as a POHCs (Principal Organic Hazardous Constituents) because of its high incinerability ranking and the property of generation of chlorine gases and PCDD/Fs when incompletely destroyed. Simulated concrete waste spiked with 1 L of C6H5Cl was treated and the emissions of 17 kinds of PCDD/Fs and other hazardous gases such as CO, THCs, NOx, SO2 and HCl/Cl2 were measured. For the worst-case condition tests for the retention of metals and radionuclides, Pb and Cs were selected because of its high volatility characteristics. The emissions of PCDD/Fs was extremely lowered than the emission limit and those of other hazardous constituents were below their emission limit. The results of performance tests on the organics destruction suggested that tested PAM-MSO combination system could readily treat PCBs-bearing spent insulation liquid, spent ion-exchange resins used for the treatment of spent decontamination liquid in the decommission process and the concreted debris bearing hazardous organic coating materials. The decontamination factor of Cs and Co were 1.4×105, 1.4×105, respectively. The emisison of Pb was 0.562 ppm. These results suggested that tested PAM-MSO system treated low-level radioactive and pb-bearing mixed waste.

Present study investigated the waste form integrity of melted products generated from PAM-MSO system, which is proposed and developed to compensate the drawbacks of each system. The disposal suitability of the melting solidification products generated from the plasma arc melting treatment of pulverized cement debris spiked by Pb, Cd and Cs, as indicators of typical hazardous metals and radionuclides existed in the low-level mixed waste in the KHNPPs. The final waste form obtained by the test was evaluated for suitability for disposal. The compressive strength was 261.10 MPa, showing much higher values when compared to other waste form products. The compressive strength of both the sample after irradiation with 107 Gy radiation and that after long-term submersion test (90 days) satisfied the disposal criteria. As a result of the leaching test conducted according to the ANS 16.1 test method, it was confirmed that the leaching index satisfies the disposal criteria.

Most of the wastes generated when dismantling nuclear power plant were contaminated with lowlevel radioactive materials, therefore, applying a plasma melting system is a good option to dispose of the complex wastes safely. Melting system with plasma technology was developed to dispose single metal or composite objects. Its purpose is to secure final emissions satisfying final treatment conditions by controlling oxidization/ reduction reaction condition in detail during the melting process. A hollow plasma torch applied at plasma melting system could be operated with various plasmaforming gasses such as N2, Air, Ar, O2, and etc. The melting furnace was designed based on a double sealing structure to prevent risk factors; such as leaks, etc. in the reaction condition. The effect of the external air inflow on the melting conditions was minimized by carefully designing the object input device, torch mounting part, final object discharge part, etc.

This facility was developed to investigate the characteristics of metal oxide and to secure operational technology through hydrogen supply to 100 kW capacity transferred arc plasma torch and melting furnace under anoxic conditions. Besides, the emission of pollutants generated during operation was minimized by burning the exhaust gases in the next combustion chamber and by applying a SNCR, a scrubber, etc. The main target object was determined as a metal oxides generated as radioactive wastes when dismantling the nuclear power plant. The metal alloy was produced by supplying hydrogen during the melting process of the metal oxide. The reaction equation is as follows: Fe + M(Metal)On + H2(Gas) → FeM + Slag + H2O In this paper, operating conditions according to the melting temperature and hydrogen supply with iron and metal oxides were investigated, and the chemical characteristics of the alloyed metal and Slag were analyzed. The result of this study can be used as fundamental data for the treatment and disposal of metal wastes.

In the present work, a three-phase AC arc plasma torch system is proposed to separate inorganic radioactive materials from the organic liquid waste. For this purpose, first, assuming the resistance of arc plasma ranges between 0.1 and 0.2 ohm, we designed a three-phase AC arc plasma power supply with the power level of 20 kW. Then, a three phase arc plasma torch consisting of three carbon rods with the diameter of 20 mm was designed and mounted on a cylindrical combustion chamber with the inner diameter of 150 mm. Detail design and basic performance of the plasma system were presented and discussed for application to the treatment of radioactive slurry wastes.

In this work, we report the basic performance of a 100 kW class mobile plasma melting system consisting of two 24-ft commercial containers, each in charge of the plasma utilities and melting process. In this system, a 100 kW class transferred type plasma torch has been installed together with a crucible having an inner volume of 2,884 cm3. Filling the inner volume of the crucible with the simulated metal waste, such as bolts and nuts, melting tests have been carried out for 5 min by varying plasma input power from 50 kW to 100 kW. By measuring the volume of metal waste before and after melting test, then, the volume reduction rates were estimated and discussed.

KHNP-CRI has developed Mega-Watt Class PTM (Plasma Torch Melter) for the purpose of reducing the volume of radioactive waste and immobilizing or solidifying radioactive materials. About 1 MW PTM is a treatment technology that operates a plasma torch and puts drum-shaped waste into a melter and radioactive waste in the form of slag is discharged into a waste container. Since only the overflowing slag is discharged from the melter, the discharge is intermittent. Therefore, solidification occurs in the process of discharging the melt. It is difficult to accumulate evenly in the waste container, and there is also an empty space. Solid radioactive waste must be disposed of to meet the acceptance criteria for radioactive waste. Plasma-treated solid waste raised concerns about the requirements. The waste solidification output in a slag container gave us some concerns for the waste package’s solidification and encapsulation requirements. The plasma-treated solid waste process to meet the acceptance criteria will be cost and need time consuming. Thus, a induction heating will be introduced to meet solidification requirements and test criteria of the solidification waste for the waste package disposal.

We developed a 100 kW Class Transferred Type Plasma Torch applicable for melting of noncombustible metal wastes. By employing reverse polarity discharge structures for hollow electrode plasma torch, a transferred type arc plasma was generated stably with long arc length higher than 10 cm at the arc currents of ~400 A and gas (N2) flow rate of ~50 lpm. High arc currents and high arc voltages caused by the increased arc length could input high power level of ~100 kW to the noncombustible metal wastes, enabling quick melting. In addition, relatively long arc length and low gas flow rates can help reduce the deposition of melted materials on the exit surface of the torch. Thanks to these features, the developed plasma torch is expected to be suitable for small-scaled and portable melting system.