검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 536

        61.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        선체구조의 품질검사 중 가장 일반적인 방법의 하나는 비파괴검사이다. 하지만 복합소재 선체는 강화재와 수지로 구성된 여러가지 재료가 섞여 있고 또 생산환경과 작업자에 따라 FRP(Fiber-Reinforced Plastics) 제작품질에 차이가 발생할 가능성이 크기 때문에 정확한 검사평가는 쉽지 않은 일이다. 특히 FRP 선박의 경우에는 다른 구조물보다 두께가 매우 두껍고 주로 수척층 공법을 이용하기 때문에 더욱 그렇다. 초음파 탐상의 조건 중 검사체의 밀도가 매우 중요하기 때문에 본 연구에서는 FRP 선박 제작에 널리 사용되고 있는 소재와 유리섬유강화재 중량 비율로 제작된 선박의 외판을 검사체로 선정하고, Pulse-Echo 초음파 탐상기를 활용하여 GFRP(Glass Fiber-Reinforced Plastics) 선체 외판의 초음파 탐상을 위한 적정 조건을 조사하였다. 1.00 MHz, 2.25 MHz, 5.00 MHz 세 종류 탐촉자로 A-Scan 을 실시하였으며 선체 외판의 두께 검사결과와 비교분석함으로써 적정 초음파 탐상 조건을 찾고자 하였다. 연구결과 탐촉자의 초음파 주파수가 높아질수록 수신자의 반사파 음향 속력을 감소시켜야 더 정도 높은 두께 측정 결과를 얻을 수 있었으며, 상대적으로 낮은 초음파 주파수 탐촉자에서 더 적은 오차가 발생함을 확인할 수 있었다.
        4,000원
        62.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 건조 고춧가루의 가공 및 저장라인에서 구리의 이용가능성을 조사하였다. 구리와 스테인리스강 표면과의 접촉을 통한 고춧가루의 색도 변화를 평가한 결과, 55oC에서 2시간 구리 판에 처리한 시료의 명도가 다소 증가하였다. 구리와 스테인리스강 접촉에 의한 고춧가루 내 미생물 저해는 중온성의 호기성 세균보다 곰팡이 및 효모의 저해에 더 효과적이었고, 55oC에서 2시간 구리 접촉에 의해 곰팡이와 효모의 수는 0.64 log 감소하여 유의적인 효과를 나타내었다. 산화방지 활성은 구리와 스테인리스 강 접촉 고춧가루의 DPPH 라디칼 소거활성은 감소한 반면 ABTS 라디칼 소거활성은 증가하였다. 본 연구는 구리 또는 구리와 스테인리스강 등의 합금을 이용하여 고춧가 루를 포함한 다양한 분말 식품의 가공 및 저장 과정에 활용할 수 있는 가능성을 제시하고 있다.
        4,000원
        63.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 CFRP 복합재료 플레이트로 외부 보강된 철근콘크리트 보 구조물의 장기 거동 특성과 CFRP 복합재료 플레이트의 부착거동을 실험을 통하여 검토하였다. 장기 사용성을 고려하기 위하여 동결융해 시험법을 사용하였으며 4절점 휨 실험을 통하여 평가하였다. CFRP 복합재료 플레이트로 보강 후 동결융해를 진행한 시험체(FFCB)와 동결융해 후 CFRP 복합재료 플레이트로 보강한 시험체(LFCB)의 4절점 휨 실험 결과를 비교 분석하였다. LFCB 시험체가 FFCB 시험체 보다 조기에 CFRP 복합재료 플레이트의 박리가 발생하였으며, 파괴형태가 다르게 발생하였다. FFCB의 경우 콘크리트 커버가 탈락되었으며, LFCB의 경우 콘크리트의 표면의 탈락이 발생하였다. 동결융해의 영향을 받은 콘크리트 재료의 성질이 약화된 결과로 판단된다. 동결융해 실험을 통하여 콘크리트 공시체의 압축강도가 약 19% 감소하였으며. 이에 따라 콘크리트 커버부의 인장강도도 감소한 것으로 판단된다. 콘크리트 구조물에 대한 보강의 경우사용기간 및 환경변수 등을 고려하여, 콘크리트 보강표면에 대한 정확한 상태평가가 필요할 것으로 판단된다.
        4,000원
        64.
        2020.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A corrugated steel plate wall (CSPW) system is advantageous to secure the strength and stiffness required for lateral force resistance because of its high out-of-plane stability. It can also stably dissipate large amounts of energy even after peak strength. In this paper, a preliminary study has been carried out to use the CSPW system in the seismic retrofit of existing reinforced concrete (RC) moment frame buildings. The seismic performance for an example building was evaluated, and then a step-by-step retrofit design procedure for the CSPW was proposed. An equivalent analytical model of the CSPW was also introduced for a practical analysis of the retrofitted building, and the strengthening effect was finally evaluated based on the results of nonlinear analysis.
        4,000원
        65.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        판형 열교환기는 1920년대부터 본격적으로 상업화되었으며, 이후 판형 열교환기의 기본 컨셉은 지금까지도 거의 변화가 없었지만 고온, 고압 그리고 대용량 열교환에 적용되기 위해 설계 및 제작 방법들이 혁신적으로 발전하여 지금에 이르게 되었다. 판형 열교환기의 개발 트렌드는 전열 효율이 좋으면서 압 력강하가 낮고 또한 유체 분배가 잘되는 전열판의 개발과 일치한다. 본 연구에서는 이러한 트렌드를 만족 시키는 선박용 중속엔진 오일 냉각용 판형 쿨러 개발과 관련된 주요 과정들을 소개하고, 또한 개발된 판형 오일쿨러의 전열성능을 실험적으로 분석하여 이에 대한 결과를 제공하고자 한다. 본 연구에서 판형 쿨러는 구조적 특징으로 인해 직접 판벽 온도를 측정할 수 없어 수정된 Wilson Plot 방법을 응용하여 열전달계수를 구하였다. 오일-물 실험 전에 물-물 실험을 통해 우선 물측의 열전달계수와 압력강하량을 구하였고, 그 결과를 바탕으로 오일측의 열전달계수를 구하였다. 양측 모두 유량 증가에 따라 열전달 성능은 증가하였지 만, 압력강하량도 동시에 증가하였다. 그리고 실험을 통해 본 연구에서 개발된 판형 오일쿨러가 개발목표치를 성공적으로 달성하였음을 확인할 수 있었다.
        4,000원
        66.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to experimentally figure out thermal performances of a newly developed wavy patterned heat plates(first heat plates) which are known to have better thermal performances than the conventional heat plates. Three types of products were made with high and low chevron angled plates. The test results show that overall heat transfer coefficients and pressure drops increased with flow rates and chevron angles just like other studies. Another purpose of this study is to find a way to reduce pressure drops while maintaining or even improving the heat transfer characteristics of the first heat plates. Research on optimization of the distribution area on the heat plate to achieve the even fluid distribution was conducted, and then the second heat plates were developed to reflect the research results. Another new three types of products with the second heat plates were manufactured and tested, too. The test results of the second heat plates were compared with those of the first heat plates to find out how the distribution area contributed to the thermal performances of the heat plates. The comparison showed that distribution area optimization could affect thermal performances of the high chevron angled plate positively, but the low chevron angled plate had little effect from the optimization. This is considered to be because the low chevron angled plate itself has a characteristic that the pressure drop is small.
        4,000원
        67.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        무도상 교량은 레일을 이음매판으로 부설하여 사용하고 있어 과다한 충격이나 궤도 틀림 등의 발생 우려로 인하여 열차의 고속주행이 어려운 실정이다. 열차의 주행안정성을 확보하기 위해서는 상호작용에 영향을 미치는 인자를 분석하여 동적 안전성에 대하여 검토할 필요가 있다. 이 연구에는 열차가 운용중인 판형교량의 현장계측을 통하여 궤도 구조 및 주거더의 충격계수를 도출하고 이를 기존연구와 비교 및 참고하여 열차의 주행속도를 고려한 충격계수의 추정식을 산정하였다. 궤도의 충격계수 산정식은 기존 연구에서 제안한 식과 유사하게 산정되었으며, 무도상교량 거더의 충격계수 산정식과 일본의 철도교 충격계수 식과 비교한 결과, 일본의 철도교 충격계수 식은 본 연구에서 산정한 거더의 충격계수 1배수 식과 2배수 식 사이에 존재하는 것으로 나타났다.
        4,000원
        68.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A gasketed plate heat exchanger(GPHE) requires a much smaller installation space than a shell & tube heat exchanger because of its compact and good thermal performances. However, GPHEs have a disadvantage of being relatively vulnerable to high temperature and pressure due to rubber gaskets. To overcome a GPHEs’ disadvantage, Welded Block type Plate Heat Exchangers(WBPHE) have been developed. The flow pattern and heat transfer principle of WBPHE are very similar to GPHEs, so they are very compact and can be applied to high temperature and pressure. In this study, the structure and characteristics of WBPHE are briefly introduced, and its thermal performances were conducted experimentally using hot and cold water in the Reynolds number’s range from 5,500 to 10,000. Test results were compared with the experimental correlations of other researchers, which shows that significant deviations were noticed in the heat transfer coefficient predictions with a deviation range from 31% to 85%. The previous friction factor correlations also predicted the current results with big errors from 25% to 45%. These deviations are expected to be due to different chevron angles between previous studies and the current study, and also the end-plate effect is expected to be one of the potential causes that led to these deviations.
        4,000원
        69.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The customer of massage chair is expanding day by day from middle age to all ages. In 2018, the market size was 700 billion KRW, an increase of 30 times over 10 years. However, most related SMEs suffer from excessive competition by the market monopoly of some major companies. In this situation, in order for a related company to survive, it is necessary to steadily research and develop new products. Founded in 2009, company L produces massage chairs for health and relaxation of customers. L’s products use a sound wave vibration module that is favorable for human body, unlike other products that use vibration motor type. However, frequent breakdowns of massage chair due to the vulnerability of plate (leaf) springs, which play an important role in sound wave vibration modules, made sap its competitiveness. In this paper, we propose a method to design desirable plate spring structure by sequentially experimenting with five different plate springs. The results of this study are expected to contribute to improve the quality of plate spring and the reliability of sound wave vibration module. In the future, it is necessary to find a way to use it in the development of foot massage or scalp management device as well as continuous research to find optimal plate spring structure through various analysis.
        4,000원
        70.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 선박용 디젤엔진의 미세먼지저감 장치에 장착된 다공판 및 믹서의 형상과 배치에 따른 압력강하와 유동균일도 특성에 대한 연구를 진행하였다. 미세먼지저감 장치에 장착된 다공판 및 믹서는 미세먼지저감 장치 내의 배출가스 및 산화/환원제의 유동 균일도를 높여 배출가스 저감 성능을 높이는 긍정적인 효과와 함께 시스템의 배압을 상승시키는 부정적인 효과도 동시에 지니고 있다. 본 연구에서는 5개의 다공판, 1개의 믹서를 Case 별로 조합하여 6개의 사양에 대해서 유동해석을 통해 각각 유동균일도 및 압력 강하를 계산하였으며, 최적의 다공판 및 믹서의 형상과 배치를 선정하였다.
        4,000원
        71.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper discusses the influence of transverse reinforcement spacing and support width of concrete wide beam on shear performance. In order to evaluate the shear performance, a total of thirteen specimens were constructed and tested. The transverse reinforcement spacing, the number of legs and support width were considered as variables. From the test results, the shear strength equation of concrete wide beam is proposed for prediction of shear strength of concrete wide beam to consider the transverse reinforcement spacing and support width. It is shown that the proposed equation is able to predict shear strength reasonably well for concrete wide beam.
        4,000원
        72.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 CFRP판으로 보강된 콘크리트 보의 피로파괴 특성을 알아보기 위하여 보강재의 정착 길이, 보강재의 정착넓이, 보강재의 정착량을 실험변수로 반복 하중에 따른 역학적 거동과 파괴형태를 분석하고 CFRP판 사용에 대한 안전성과 타당성을 평가하도록 하였다. 반복하중의 범위는 극한하중의 10~70%를 취하고 3점 재하방식으로 sine파를 이용한 3Hz의 속도로 재하 하였다. 실험결과 보강길이가 작을수록 보강재 단부에서 박리파괴가 일어날 확률이 증가하였고 반복하중의 횟수도 현저히 감소되어 안정성은 다소 감소됨을 알 수 있다. 보강두께는 감소할수록 피로수명은 증가하지만 CFRP와 콘크리트사이의 부착력 이 저하되어 경계면에서 박리파괴가 일어나 최종파괴를 이루었다. 보강넓이는 감소할수록 피로 횟수는 현저하게 증가되었고 보강재의 이용률도 현저하게 증가되어 안정성도 증가함을 알 수 있다.
        4,000원
        77.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 역세척이 가능한 평막과 MBR 하부에서 공급되는 공기 및 자연적으로 순환되는 구형 입자를 이용하여 투과 실험하였다. 활성슬러지 수용액은 MLSS 8,000 mg/L로 유지하였으며 여과/이완(FR), 이완시 역세척(FR/BW), 사인파형 연속투과 운전(SFCO) 및 사인파형 연속투과 운전 시 역세척(SFCO/BW) 방식에 따른 막간차압(TMP)을 측정하였다. 역세척 유량을 47에서 14 L/m2⋅hr로 감소시키면, TMP가 증가하였으며 SFCO보다는 FR 방식의 TMP가 크게 증가하였다. 또한 역세척 방식이 구형입자를 이용한 세척방식보다 TMP를 더 감소시켰으며, 구형입자와 역세척 방식을 동시에 사용하면 각각의 방법보다 더 효과적임을 확인할 수 있었다.
        4,000원
        78.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        우리나라는 지진으로부터 안전한 국가라는 인식이 형성되었으나 최근 경주와 포항 지진에 의해 발생된 구조물 피해로 구조물 안전성 확보를 위한 관심이 증가하고 있다. 국내 중저층 건축물에 다수 적용되고 있는 철골 모멘트 골조는 기본적인 내진성능을 보유하고 있지만 보-기둥 접합부의 소성변형으로 인한 취성파괴로 다양한 문제를 발생시킨다. 최근에는 이러한 문제를 해결하기 위해 구조물에 상온에서 잔류변형으로부터 원형복원이 가능한 초탄성 형상기억합금의 활용에 관한 연구가 진행되고 있다. 따라서 본 연구에서는 소성변형이 집중되는 보 플랜지 부재에 초탄성 형상기억합금 보강판을 활용한 보–기둥 접합부에 대하여 실험을 통한 실질적인 내진성능을 평가하고자 한다.
        4,000원
        79.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        To enumerate Staphylococcus aureus in food, Baird-Parker Agar (BPA) is usually used in the conventional method, However it requires time and space for the preparation and plating, and incubation. Thus, use of the 3MTM PetrifilmTM Staph Express Count Plate (STX Petrifilm) might be appropriate to solve these challenging problems. The purpose of this study was to compare the efficiency of STX Petrifilm with BPA for enumeration of S. aureus in various foods. A mixture of S. aureus strains ATCC29213, ATCC25923, and ATCC13565 was inoculated on marinated pork chop, beef (chuck tender), dried filefish, semi-dried squid, rice cake, and Japchae (stir-fried glass noodles) at 2, 3, 5, and 7 Log CFU/g. S. aureus cell counts were enumerated by spread-plating on STX Petrifilm and BPA after 0 and 24 hours at 4oC (marinated pork chop, beef, semi-dried squid, and stir-fried glass noodles) and 25oC (dried filefish and rice cake). Recovery of STX Petrifilm for S. aureus from various food samples was compared with BPA, and the results showed that there were no significant differences between two selective media in all cases. The results indicated that STX Petrifilm had enough efficiency to recover S. aureus from various foods as well as saving time and space.
        4,000원
        1 2 3 4 5