In this study, partially stabilized zirconia was synthesized using a chemical Y2O3 stabilizer and hydrothermal method. First, YCl3-6H2O and ZrCl2O-8H2O was dissolved in distilled water. Y-TZP (a Y2O3-doped toughened zirconia polycrystalline precursor) was also prepared by conventional co-precipitates in the presence of an excess amount of NH4OH solution under a fixed pH of 12. The Y-TZP precursors were filtered and repeatedly washed with distilled water to remove Cl- ions. ZrO2-Xmol%Y2O3 powder was synthesized by a hydrothermal method using Teflon Vessels at 180˚C for 6 h of optimized condition. The powder added with the Xmol%- Y2O3 (X = 0,1,3,5 mol%) stabilizer of the ZrO2 was synthesized. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens of 33mm×8mm×3 mm for three-point bend tests were used in the mechanical properties evaluation. A teragonal phase was observed in the samples, which contains more than 3 mol% Y2O3. The 3Y-ZrO2 agglomerated particle size was measured at 7.01μm. The agglomerated particle was clearly observed in the sample of 5 mol % Y2O3-ZrO2, and and the agglomerated particle size was measured at 16.4 um. However, a 20 nm particle was specifically observed by FE-SEM in the sample of 3 mol% Y2O3-ZrO2. The highest bending fracture strength was measured as 321.3 MPa in sample of 3 mol% Y2O3-ZrO2.

This study was carried out to investigate the possibility of solid particles as a stabilizing agent instead of surfactant for preparing emulsions in the cosmetics. The type of emulsions stabilized by solid particles was dependent on wettability of the particles for water and oil. The optimal conditions of emulsions stabilized by solid particles were determined with ratio of water and oil phase, polarity of oils and amount of stabilizers. In the foundation appling the optimal condition of emulsions stabilized by solid particles without surfactant, the stable emulsion type foundation was successfully prepared. As a result, this work indicates that emulsions stabilized by solid particles can be applied to make-up cosmetics.

The usual ceramic process of mixing and milling in state of oxides ZrO2 and CeO2 was adopted in this study in a wet process to manufacture Ce-TZP. CeO2-ZrO2 ceramics containing 8~20 mol% CeO2 were made by heat treatment at 1250~1500˚C for 5hr. The maximum dispersion point of every slurry manufactured with a mixture of ZrO2 and CeO2 was neat at pH10. A stable slurry with average particle size of 90 nm can be manufactured when it is dispersed with the use of ammonia water and polycarboxylic acid ammonium. The sintered Ce-TZP ceramics manufactured with the addition of CeO2 in a concentration of less than 10 mol% progressed to the fracture of the specimen due to the existence of a monoclinic phase of more than 30% at room temperature. More than 99% of the tetragonal phase was created for the sintered body with the addition of CeO2 beyond 18 mol%, but the degradation of the mechanical properties on the entire specimen was brought about due to the CeO2 existing in a percentage above 3%. Consequently, the optimal Ce-TZP level combined in the oxide state was identified to be 16 mol% of CeO2 contents.

The ship's heading information of hybrid GPS/EM compass were applied to the AIS of fishing vessel and examined the possibility of accuracy improvement. It is observed 453 each in AIS receiver of land among 3,982 each in AIS Rx/Tx transponder of the test ship at sea, and transmission interval according to the speed of ship is determined the 11.4% good transmitting data of the all information. In results, maximum compass error for the ship's heading of an EM compass was 19.1˚. The variance of ship's heading owing to the speed of ship is surveyed. The COG (Course Over Ground) was changed extremely in 180˚W-179˚E range under 4.9knots, and in 24˚W-23˚E range over 4.9knots. Finally, using the ship's heading of EM compass and the COG from GPS for the autopilot system of a small fishing boat and the ship's heading information of AIS results in danger on the own ship's navigation safety and leads to make confusion both the others and VTS (Vessel Traffic Service) center. Therefore, the hybrid GPS/EM compass is identified as the best system for a small fishing boat and is allowed to offer continuously a ship's heading information with high accuracy and stability.

Calcia (CaO) stabilized cubic-HfO2 is studied by density functional theory (DFT) with generalized gradient approximation (GGA). When a Ca atom is substituted for a Hf atom, an oxygen vacancy is produced to satisfy the charge neutrality. The lattice parameter of a 2×2×2 cubic HfO2 supercell then increases by 0.02 Å. The oxygen atoms closest to the oxygen vacancy are attracted to the vacancy as the vacancy is positive compared to the oxygen ion. When the oxygen vacancy is located at the site closest to the Ca atom, the total energy of HfO2 reaches its minimum. The energy barriers for the migration of the oxygen vacancy were calculated. The energy barriers between the first and the second nearest sites, the second and the third nearest sites, and the third and fourth nearest sites are 0.2, 0.5, and 0.24 eV, respectively. The oxygen vacancies at the third and fourth nearest sites relative to the Ca atom represent the oxygen vacancies in undoped HfO2. Therefore, the energy barrier for oxygen migration in the HfO2 gate dielectric is 0.24 eV, which can explain the origin of gate dielectric leakage.

This study compared the effect of therapeutic exercise with conservative treatment in women with chronic neck pain. Subjects were allocated to control, neck isometric exercise, and cervical stabilization exercise groups consisting of 29, 32, and 31 patients, respectively. The conservative treatment for the control group consisted of hot packs, ultrasound, interferential current therapy, and intermittent cervical traction. The neck isometric exercise group performed a neck isometric exercise and the cervical stabilization exercise group performed a cervical stabilization exercise. To compare the three groups, the levels of perceived pain, neck disability, and psychological depression were assessed on admission, at discharge, and one month after discharge. On admission and at discharge, the pain and neck disability scores did not differ significantly among the groups. However, one month after discharge, both the neck isometric and cervical stabilization exercise groups had significantly improved perceived pain levels as compared to control (p<.05). The improvement in the degree of neck disability was most significant in the cervical stabilization exercise group (p<.05). On comparing the changes in the variables at the three assessments for each group, there was a significant difference between the control and cervical stabilization exercise groups (p<.05). The findings indicate that therapeutic exercises, especially cervical stabilization exercises, are more effective for improving pain and neck disability than conservative treatment.

본 연구는 사용 후 핵연료의 금속전환 공정에서 발생되는 폐용융염을 고형화하는 방법으로 실리카 함유 무기물을 이용하여 폐용융염을 열적, 수화학적 안정한 화합물로 전환하는 방법을 제안하였다. 실리카 함유 무기물(SAP)은 일반적인 sol-gel process로 합성되었으며, 및 로 구성된다. 제조된 SAP을 에서 폐용융염과 반응시켜 각 금속염화물에 대한 반응특성 및 열안정성을 조사하고, PCT 침출시험법을 이용하여 수화학적 안정성을 평가하였다. LiCl은 와 로, CsCl는 CS-aluminosilicate와 로, 는 로, 는 로 전환되었다. 9시간 동안 반응시킨 후, 금속염화물의 전환율은 였으며, 까지 열감량은 1wt%이하로 TGA(Thermo Gravimetric Analysis)로 확인하였다. Cs 및 Sr의 침출속도는 로 매우 높은 내침출특성을 나타내었다. 이상의 결과로부터, SAP으로 명명된 안정화제(stabilizer)는 금속염화물로 구성된 폐용융염에 대해 매우 효과적인 것으로 판단된다. SAP을 이용한 폐용융염의 고화처리방법은 후속적인 안정성의 검증과정을 통하여 폐용융염의 최종처분부피를 최소화할 수 있는 대안적인 고화방법으로 고려될 수 있을 것으로 기대 된다.

케이블 돔은 초기에 불안정한 상태에서 각각의 케이블에 장력을 도입하면서 점차적으로 안정화되는 구조이다. 이러한 과정은 케이블에 압축력이 발생하게 되며, 일반적인 구조해석으로는 그 해를 찾을 수 없으므로 이 논문에서는 동적이완법을 사용한다. 또한, 안정화 이행과정해석을 실제적인 문제에 적용하는 방법으로 서울올림픽 체조경기장 케이블 돔 지붕에 적용함으로써 해석결과와 실측결과를 비교하고 안정화 이행과정해석의 적절함을 검증한다.

우라늄 변환시설의 라군 슬러지에 함유된 질산염의 안정적 처리를 위해 물 첨가 용해를 실시한 뒤, 여과 케이크의 안정화 특성에 대하여 알아보았다. 물 용해에 의해 대부분의 질산염은 고농도 질산염 용액으로 제거되었으므로, 여과 케이크의 열분해는 에서 하나의 단계로 수행하였다. Muffle furnace를 이용하여 에서 5시간동안 여과 케이크의 열분해를 실시한 결과 라군 1 슬러지에 포함된 U은 의 열분해와 함께 의 형태로 안정화 되었다. 라군 2 열분해 잔류물의 경우에는 열분해 시 생성된 CaO가 냉각과정에서 수분과 반응하여 로 전환되는 것을 TG/DTA 분석과 XRD 분석을 통해 확인할 수 있었지만, 처분장에서 대기중 노출이나 지하수의 침출 등에는 안정한 화합물로 알려져 있으므로, 특별한 첨가제의 첨가 없이 단순 열분해 후 처분이 가능할 것으로 판단된다.

연근해 어선에서 사용되는 저가이면서 고정도의 GPS 컴퍼스는 위성 신호의 차단 및 선박이 고속 선회시 선수방위의 산출이 불안정해지는 문제점을 지니고 있어 전자자기 컴퍼스를 이용하여 안정된 선수방위 검출이 가능하도록 고안한 하이브리드 GPS-전자자기 컴퍼스를 시작(試作)하여, 그 성능을 평가하고 고찰한 결과는 다음과 같다. 스텝모터를 이용한 선회각속도별 실험에서 GPS 컴퍼스는 선회각속도 25˚/sec 이하에서는 1회/sec 씩 0.1˚ 단위로 안정된 선수방위를 검출하였으나, 그 이상의 선회각속도에서는 선수방위를 검출하지 못하였다. 한편, 전자자기 컴퍼스는 선회각속도에 상관없이 항상 선수방위를 나타내었으나, 컴퍼스 오차를 내포하고 있어 GPS 컴퍼스에 비해 정밀도는 낮음을 알 수 있었다. 고정점과 차량으로 이동 중에 하이브리드 GPS-전자자기 컴퍼스의 선수방위 정보를 출력한 결과, GPS 컴퍼스가 정상적으로 작동한 경우에는 GPS 컴퍼스의 선수방위 정보가 출력되고, 그렇지 못할 경우에는 선수방위 정보가 출력되고, 그렇지 못할 경우에는 전자자기 컴퍼스의 선수방위에 컴퍼스 오차를 가감하여 출력됨으로써 선수방위가 안정적으로 제공되었다. 또한, GPS 컴퍼스와 전자자기 컴퍼스에 의한 선수방위의 유사성을 검증하기 위하여, 두 데이터의 이동거리에 대한 선수방위를 이용하여 공분산분석을 행한 결과, 두 컴퍼스의 선수방위는 95%의 신뢰수준으로 유사성이 검증되었다.

The purpose of this study was to verify the most effective spinal stabilization exercises program by comparing the activities of muscles contributing to spinal stabilization during four types of exercises using a sling and a mat. Twenty healthy males were recruited and each subjects performed four types of exercises. Exercise 1 was performed in a quadruped position with the subjects lifting the left arm and the opposite leg on the mat. Exercise 2 was performed in a prone position while holding a sling with the right hand and the left knee was fully extended while lifting the left arm and right leg. Exercise 3 was performed in quadruped position while holding a sling with one the right hand and lifting the opposite arm and leg. In exercise 4, subjects were instructed to maintain a balance push-up position while holding slings with both hands in 10 cm forward reaching with extended elbows. Electromyographic(EMG) activities were recorded from the multifidus, external oblique, internal oblique, abdominal rectus, and erector spinalis muscles during the exercises. The EMG amplitude of each muscle was normalized to the amplitude in the maximal voluntary isometric contraction (MVIC) of each muscle. Repeated ANOVA and Bonferroni's tests were used to compare the differences in the muscle activity according to the types of exercise. The EMG amplitudes of all the muscles were significantly different according to the types of exercises (p<.05). The highest EMG activities of each muscle was as follow; multifidus was 73.38%MVIC in exercise 3, the erector spinalis was 40.03%MVIC in exercise 3, the external oblique was 135.88%MVIC in exercise 4, the internal oblique was 128.60%MVIC in exercise 4, and the rectus abdominalis was 95.24%MVIC in Exercise 4. The types of exercises showed a significant difference in composition rate of EMG amplitudes of each muscle (p<.05). EMG composition rate of the multifidus was high in exercise 1 and 3. However, EMG composition rates of the external oblique, internal oblique, and the rectus abdominals were high in exercise 2 and 4. These results showed differences in EMG activities of muscles contributing to trunk stabilization during different therapeutic exercises. Therefore, the type of exercise should be carefully selected to effectively strengthen a specific trunk stabilizer.