철광산 지역의 매장량 평가를 위해 전기 및 전자탐사 방식의 물리탐사를 수행하였다. 철광산 조사에 적합한 물리탐사 기법을 결정하고 연구지역의 지질정보에 대해 파악하기 위해, 대상 지역의 시추 코어와 노두 파편으로부터 획득한 암석 코어를 분석하였다. 획득한 코어에 대해 비중, 밀도, 공극률, 비저항, P파 속도 등 5가지 물성을 측정한 결과, 자철광체가 전기적 특성에 민감하게 반응한다는 것을 확인하고 전기 탐사를 수행하기로 결정하였다. 전기비저항 탐사는 기존의 연구들을 통해서 적용 기법들이 다양하고 해상도 또한 높은 편이 알려져 있어 철광산의 조사에 적합할 것으로 판단되었으나, 심부에서는 해상도가 낮으며 탐사의 수행도 어렵다는 한계를 가지고 있다. 이에 전기비저항 탐사를 보완하기 위해 물리탐사법 중 비교적 깊은 탐사심도를 가지는 MT (MagnetoTelluric) 탐사를 추가적으로 수행하였다. 또한 MT 탐사의 천부 정보에 대한 취약성을 보완하기 위해 인공송신원을 사용하는 CSMT (Controlled Source MT) 탐사를 추가적으로 실시하였다. 전기 및 전자탐사를 통해 채광이 이루어진 광산 하부에 저비저항체가 있음을 발견하였으며, 향후 추가적인 이용 가치를 확인하였다.

The iron oxides nanoparticles and iron oxide with other compounds are of importance in fields including biomedicine, clinical and bio-sensing applications, corrosion resistance, and magnetic properties of materials, catalyst, and geochemical processes etc. In this work we describe the preparation and investigation of the properties of coated magnetic nanoparticles consisting of the iron oxide core and organic modification of the residue. These fine iron oxide nanoparticles were prepared in air environment by the co-precipitation method using of Fe2+ : Fe3+ where chemical pre- cipitation was achieved by adding ammonia aqueous solution with vigorous stirring. During the synthesis of nanoparti- cles with a narrow size distribution, the techniques of separation and powdering of nanoparticles into rather monodisperse fractions are observed. This is done using controlled precipitation of particles from surfactant stabilized solutions in the form organic components. It is desirable to maintain the particle size within pH range, temperature, solution ratio wherein the particle growth is held at a minimum. The iron oxide nanoparticles can be well dispersed in an aqueous solution were prepared by the mentioned co-precipitation method. Besides the iron oxide nanowires were prepared by using similar method. These iron oxide nanoparticles and nanowires have controlled average size and the obtained products were investigated by X-ray diffraction, FESEM and other methods.

The key concept of nanopowder agglomerate sintering (NAS) is to enhance material transport by controlling the powder interface volume of nanopowder agglomerates. Using this concept, we developed a new approach to full density processing for the fabrication of pure iron nanomaterial using Fe nanopowder agglomerates from oxide powders. Full density processing of pure iron nanopowders was introduced in which the powder interface volume is manipulated in order to control the densification process and its corresponding microstructures. The full density sintering behavior of Fe nanopowders optimally size-controlled by wet-milling treatment was discussed in terms of densification process and microstructures.

In this work, iron oxide (Fe3O4) nanoparticles were deposited on multi-walled carbon nanotubes (MWNTs) by a simple chemical coprecipitation method and Fe3O4-decorated MWNTs (Fe-MWNTs)/polypyrrole (PPy) nanocomposites (Fe-MWNTs/PPy) were prepared by oxidation polymerization. The effect of the PPy on the electrochemical properties of the Fe-MWNTs was investigated. The structures characteristics and surface properties of MWNTs, Fe-MWNTs, and Fe-MWNTs/PPy were characterized by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. The electrochemical performances of MWNTs, Fe-MWNTs, and Fe-MWNTs/PPy were determined by cyclic voltammetry and galvanostatic charge/discharge characteristics in a 1.0 M sodium sulfite electrolyte. The results showed that the Fe-MWNTs/PPy electrode had typical pseudo-capacitive behavior and a specific capacitance significantly greater than that of the Fe-MWNT electrode, indicating an enhanced electrochemical performance of the Fe-MWNTs/PPy due to their high electrical properties.

무기안료는 인체에 대한 안정성과 다른 소재와의 상용성이 우수하며, 미적 특성을 감미하기 위한 화장품, 인쇄잉크, 페인트, 건설자재 등 다양한 분야에서 관심 받고 있다. 본 논문에서는 망간과 철이 도핑된 이산화티탄 안료를 합성하기 위하여 수열합성법을 이용하였다. 공정 변수로는 망간 전구체의 양, 철 전구체의 양 및 하소온도 등을 변화시켰다. 제조된 안료의 최적 조건은 망간 전구체의 양이 1.0wt%, 철 전구체의 양이 1.5wt% 그리고 하소온도 550℃일 때였다. 제조된 안료는 XRD, EDS, FE-SEM, Spectrophotometer, UV-Vis Spectrometer 등으로 분석 하였다.

Iron is an essential trace element for normal functions of the body. Restriction of iron availability directly limits erythropoiesis. The objective of this experiment was to compare the bioavailability of iron nanoparticles (Fe-NPs) with iron-microparticles (Fe-MPs) in anemic mice. There were four experimental groups, including the normal control group, iron-deficiency anemia (IDA) group, Fe-NPs group, and Fe-MPs group. Animals in the normal group fed on an adequate iron-containing diet (45 ppm Fe). Meanwhile, animals in the other three groups fed on a low Fe diet (4.5 ppm Fe) for seven weeks. Double deionized water was supplied as drinking water ad libitum. After feeding for three weeks with the low Fe diet, animals in the Fe-NPs and Fe-MPs groups received oral administration of Fe-NPs or Fe-MPs at a daily dose of 40 mg/kg for four weeks. The IDA group showed markedly decreased red blood cell (RBC) count, hematocrit (Hct), and hemoglobin (Hb) values compared with the normal group throughout the experimental periods. Treatments with Fe-NPs or Fe-MPs for four weeks resulted in restoration of the decreased RBC count and hematological values similar to normal values. The Fe-NPs group showed faster restoration in values than Fe-MPs with passage of time. The iron contents of the upper small intestine in the Fe-NPs and Fe-MPs groups were higher than in the normal group at weeks 2 and 4. Treatment with Fe-NPs and Fe-MPs resulted in a significant increase in hepatic iron contents and lipid peroxidation, compared with the IDA group with passage of time. The iron contents in liver and ferritin deposits in spleen were identified in the Fe-NPs and Fe-MPs groups, similar to the normal group. These results indicate that oral administration of both Fe-NPs and Fe-MPs can result in recovery from anemia and Fe-NPs is more absorbable and available in the body than Fe-MPs.

Both iron-deficient and zinc-sufficient diets have been known to be associated with a decreased risk of colon cancer. We investigated that effect of dietary zinc on the formation of colonic aberrant crypt foci (ACF) induced by azoxymethane (AOM) followed by dextran sodium sulfate in iron-deficient mice. Five-week old ICR mice were acclimated for 1 week and fed on iron-deficient diet (4.50 ppm iron) with three different zinc levels (0.01, 0.1, and 1.0 ppm) for 12 weeks. The total number of aberrant crypt (AC) and ACF was measured in the colonic mucosa after methylene blue staining. The total ACF numbers of low Zn (LZn), medium Zn (MZn) and high Zn (HZn) diet groups were 10.00 ± 2.67, 8.78 ± 3.12, and 7.96 ± 2.44, respectively and there were no significant differences among the groups. However, the total AC numbers of HZn (27.07 ± 3.88) and MZn (26.39 ± 5.59) diet groups were significantly low compared to LZn (22.57 ± 5.09) diet group (p<0.01). Cytosolic SOD activity was the highest in LZn diet group. But thiobarbituric acid-reactive substances level in liver was also the highest in LZn diet group compared to other groups. There is no difference in cell proliferation in mucous membrane among the groups, while apoptotic positive cells were increased in the HZn diet group. The high zinc diet exhibited decreased β-catenin-stained areas on the mucous membrane of colon compared to the LZn or MZn diet group. These findings indicate that dietary zinc might exert a modulating effect on development of ACF/AC in the mice with iron-deficient status.

Iron nanoparticles (Fe-NPs) have recently been used for cancer diagnosis and therapy for imaging contrast and drug delivery. However, no study on nutritional bioavailability of Fe-NPs in the body has been reported. Ascorbic acid (AA) is known to aid in absorption of iron in the stomach by reducing Fe (III) to Fe (II). In this study, we investigated the bioavailability of Fe-NPs with AA in iron-deficiency-anemic mice in comparison with non-nano iron particles. Iron-deficient anemia was induced by feeding an iron-deficient diet (4.5 mg Fe/kg) and ocular bleeding from retro-orbital venous plexus for four weeks. Normal control mice were given a normal diet (45 mg Fe/ kg). After induction of anemia in mice, anemic mice received daily oral administration of Fe (40 mg/kg B.W.) + AA (5 g/kg B.W) and Fe-NPs (40 mg/kg B.W) + AA (5 g/kg B.W). After sacrifice, liver and spleen tissues were observed by haematoxylin & eosin stain. Amount of trace iron in liver and upper small intestine was investigated using an inductively coupled plasma-atomic emission spectrometer. Red blood cells (RBC), hematocrit (Hct), hemoglobin (Hb), and total iron binding capacity were also measured. The concentrations of iron in the Fe-NPs + AA group were significantly higher in liver and in upper small intestine than that in the Fe + AA group. The values of RBC, Hct, and Hb in the Fe-NPs + AA group were more rapidly increased to normal values compared with the Fe + AA group with increasing time. These results suggest that Fe-NPs in the presence of AA may be more bioavailable than non-nano Fe in Fe-deficient anemic mice.

This study has been performed on the full density sintering of Fe nanopowder and the surface hardening by plasma ion nitriding. The Fe sintered part was fabricated by pressureless sintering of the Fe nanopowder at in which the nanopowder agglomerates were controlled to have 0.5-5 sized agglomerates with 150 nm Fe nanopowders. The green compact with 46% theoretical density(T.D.) showed a homogeneous microstructure with fine pores below 1 . After sintering, the powder compact underwent full densification process with above 98%T.D. and uniform nanoscale microstructure. This enhanced sintering is thought to be basically due to the homogeneous microstructure in the green compact in which the large pores are removed by wet-milling. Plasma ion nitriding of the sintered part resulted in the formation of '- equilibrium phase with about 12 thickness, leading to the surface hardening of the sintered Fe part. The surface hardness was remarkably increased from 176 for the matrix to 365 .

Selenium (Se) is known to prevent from several cancers, while iron (Fe) is known to be associated with high risk of cancers. The role of Se on colon carcinogenesis was investigated in an animal model induced by azoxymethane (AOM) and dextran sodium sulfate (DSS) in low Fe mice. Six-week old ICR mice fed on a low Fe diet (4.5 ppm Fe; generally 10 times lower than normal Fe) with three different Se (0.02, 0.1 or 0.5 ppm) levels for 24weeks. The animals received weekly three (0~2nd weeks) i.p. injections of AOM (10 mg/kg B.W), followed by 2%DSS with drinking water for 1 week to induce the colon cancer. There were five experimental groups including vehicle,positive control (normal Fe level, AOM/DSS), Low Fe (LFe) + AOM/DSS+Low Se (LSe), LFe + AOM/DSS + medium Se (MSe) and LFe + AOM/DSS + high Se (HSe) groups. HSe group showed a 66.7% colonic tumor incidence, MSe group showed a 69.2% tumor incidence, and LSe group showed a 80.0% tumor incidence. The tumor incidence was negatively associated with Se levels of diets. Tumor multiplicity in Hse group was significantly low compared to the other groups (p < 0.05). With increasing Se levels of diets, the primary anti-proliferating cell nuclear antigen (PCNA)-positive cells were decreased and apoptotic bodies were increased in a dose-dependent manner. Sedependent glutathione peroxidase activity and its protein level were dependent on the levels of Se of diets. Malondialdehyde level in liver was lowest in Hse group among experimental groups. These findings indicate that dietary Se is chemopreventive for colon cancer by increasing antioxidant activity and decreasing cell proliferation in Fe-deficient mice.

In this study, powder metallurgy and severe plastic deformation by high-pressure torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. Water-atomized pure iron powders were consolidated to disc-shaped samples at room temperature using HPT of 10 GPa up to 3 turns. The resulting microstructural size decreases with increasing strain and reaches a steady-state with nanocrystalline (down to ~250 nm in average grain size) structure. The water-atomized iron powders were deformed plastically as well as fully densified, as high as 99% of relative density by high pressure, resulting in effective grain size refinements and enhanced microhardness values.

Currently, there are two main issues regarding the development of core technologies in the automotive industry: the development of environmentally friendly vehicles and securing a high level of safety in the event of an accident. As part of the efforts to address these issues, research into alternative materials and new car body manufacturing and assembly technologies is necessary, and this has been carried out mainly by the automotive industries. Large press molds for producing car body parts are made of cast iron. With the increase of automobile production and various changes of design, the press forming process of car body parts has become more difficult. In the case of large press molds, high hardness and abrasive resistance are needed. To overcome these problems, we attempted to develop a combined heat treatment process consisting of local laser heat treatment followed by plasma nitriding, and evaluated the characteristics of the proposed heat treatment method. From the results of the experiments, it has been shown that the maximum surface hardness is 864 Hv by the laser heat treatment, 953 Hv by the plasma nitriding, and 1,094 Hv by the combined heat treatment. It is anticipated that the suggested combined heat treatment can be used to evaluate the durability of press mold.

In the current study, the effects of particle size on compaction behavior of water-atomized pure iron powders are investigated. The iron powders are assorted into three groups depending on the particle size; 20-45 , 75-106 , and 150-180 for the compaction experiments. The powder compaction procedures are processed with pressure of 200, 400, 600, and 800 MPa in a cylindrical die. After the compaction stage, the group having 150-180 of particle size distribution shows the best densification behavior and reaches the highest green density. The reason for these results can be explained by the largest average grain size in the largest particle group, due to the low plastic deformation resistance in large grain sized materials.

The present study aimed to verify the effects of DFO on PDL cells, with particular emphasis on focusing on osteoblastic differentiation. Its mechanisms related to heme oxygenase-1 (HO-1) pathway were also analyzed. DFO increased the expression of HO-1 and early osteoblastic differentiation markers, such as alkaline phosphatase (ALP) and bone sialoprotein (BSP). DFO upregulated heme oxygenase-1. Treatment with HO-1 siRNA blocked the DFO-stimulated osteoblastic differentiation and HO-1 expression. The NF-kB inhibitor pyrrolidine dithiocarbamate, phosphatidylinositol 3-kinase inhibitor Wortmannin, and p38 MAPK inhibitor U0126 blocked the effects of DFO on HO-1 expression and osteoblastic differentiation in PDL cells. Collectively, these data suggest that DFO promotes osteoblastic differentiation and induces the expression of defense protein HO-1 probably via PI3K, p38 MAPK, and NF-kB signalling pathways in PDL cells.

Selenium is an essential micronutrient which functions as an essential constituent of selenoproteins. The selenoproteins play an important role in the body’s defense from free radicals associated with chronic diseases such as cancer. The effect of selenium on colon carcinogenesis was investigated using an experimental animal model. Five-week old ICR mice were acclimated for one week, and fed on the Fe-overloaded diet (450 ppm) with different Se diets (0.02, 0.1 or 0.5 ppm) for 12 weeks. Animals were injected intraperitoneally with azoxymethane (AOM, 10 mg/㎏ B.W. weekly for 3 weeks), followed by 2% dextran sodium sulfate (DSS) in the drinking water for a week. There were three experimental groups including low Se group (Lse), medium (normal standard diet for mice) Se (MSe), and high Se (HSe). The numbers of aberrant crypt foci (ACF) and aberrant crypt (AC) were measured in the colonic mucosa. The iron and selenium concentrations in liver was measured using ICP-AES. Glutathione peroxidase (GPx) activity was determined in the liver and colon. TUNEL assay for cell apoptosis and proliferating cell nuclear antigen (PCNA) staining for cell proliferation were performed. Immunohistochemical staining of β-catenin was also performed in mucous tissue of colon. The dietary Se decreased the numbers of ACF/㎠ and AC/㎠ in a dose-dependent manner. HSe diet significantly decreased the numbers of AC/㎠, compared with LSe diet (p<0.05). The tumor incidence rate in low Se diet group was 5% higher than medium Se diet group and 20% higher than high Se diet group. The activities of GPx in the liver and colon were dependent on the content of dietary selenium. Apoptosis-positive cells were also increased by dietary Se in a dose-dependent manner. PCNA-positive staining was weak in high Se group. β-catenin stained area was increased in low Se group while it was decreased in high Se group. These findings indicate that dietary selenium exert a protecting effect on colon cancer by inhibiting the development of ACF/AC, increasing GPX and apoptosis, and decreasing cell proliferation and expression of β-catenin in mice.