The EV electric vehicle market is growing rapidly worldwide. Magnet fixing technology is important for mass production of driving motors, a key part of electric vehicles. The magnet fixing method was carried out by the PAM (Polyamide molding) method. This study conducted the injection of rotor core magnet PA of EV traction motor and is a study on the amount of rotor core deformation. In this study, the change in the outer diameter of the product after injection and the non-molding phenomenon were tested. An injection mold was made and the results and phenomena of product deformation types are discussed.

For a plastic diffusion lens to uniformly diffuse light, it is important to minimize deformation that may occur during injection molding and to minimize deformation. It is essential to control the injection molding condition precisely. In addition, as the number of meshes increases, there is a limitation in that the time required for analysis increases. Therefore, We applied machine learning algorithms for faster and more precise control of molding conditions. This study attempts to predict the deformation of a plastic diffusion lens using the Decision Tree regression algorithm. As the variables of injection molding, melt temperature, packing pressure, packing time, and ram speed were set as variables, and the dependent variable was set as the deformation value. A total of 256 injection molding analyses were conducted. We evaluated the prediction model's performance after learning the Decision Tree regression model based on the result data of 256 injection molding analyses. In addition, We confirmed the prediction model's reliability by comparing the injection molding analysis results.

The nutrient balances originated from livestock manure in Korea has not being include minor livestock species (e.g., horse, deer, and goat) since their manure excretion unit (MEU), nutrient excretion unit (NEU), and nutrient loading coefficient (NLC) are not known yet. In the present research work, the primary focus had laid therefore on securing domestic MEU for the specified minor livestock species which provides the basis for the computation of NEU and NLC. Moreover, the nutrient potential and economic value of composted manure from minor livestock was assessed on the basis of contents in the inorganic fertilizers such as Urea, (46% N) and Fused superphosphate (20% phosphorus pentoxide). The obtained MEU was found to be 10.52±5.48, 4.07±1.69, and 0.843±0.1 kg/head/day for horse, deer, and goat, respectively. In addition, the measured NLCs of horse, deer, and goat were [N, 0.7; P, 0.9], [N, 0.7; P, 0.6] (Both deer and goat were the same.), respectively. Consequently, the horse, deer, and goat manure have a potential of 3,840.1 ton N/year and 9,390.2 ton P/year as an inorganic fertilizer of urea and fused superphosphate. These findings may facilitate the development of more accurate nutrient budget taking into account both major and minor livestock and improve the manure management measures for land application.

Understanding sciences behind fall-related hip fractures in older adults is important to develop effective interventions for prevention. The aim of this review is to provide biomechanical understanding and prevention strategies of falls and related hip fractures in older adults, in order to guide future research directions from biomechanical perspectives. While most hip fractures are due to a fall, a few of falls are injurious causing hip fractures, and most falls are non-injurious. Fall mechanics are important in determining injurious versus non-injurious falls. Many different biomechanical factors contribute to the risk of hip fracture, and effects of each individual factors are known well. However, combining effects, and correlation and causation among the factors are poorly understood. While fall prevention interventions include exercise, vision correction, vitamin D intake and environment modification, injury prevention strategies include use of hip protectors, compliant flooring and safe landing strategies, vitamin D intake and exercise. While fall risk assessments have well been established, limited efforts have been made for injury risk assessments. Better understanding is necessary on the correlation and causation among factors affecting the risk of falls and related hip fractures in older adults. Development of the hip fracture risk assessment technique is required to establish more efficient intervention models for fall-related hip fractures in older adults.

While efforts have been made to address fall-related injuries in older adults, the problem is unsolved to date. The purpose of this review is to provide a guideline for fall and injury prevention programs in older adults, based on evidence generated over the past 30 years. Research articles published between 1990 and 2020 have been searched on PubMed, using keywords, including but not limited to, falls, hip fracture, injuries, intervention, older adults, prevention, hip protector, vitamin D, safe landing strategy, and exercise. Total of 98 articles have been found and categorized into five intervention areas: exercise program, hip protector, safe landing strategy, vitamin D intake, and compliant flooring. Furthermore, the articles have been rated based on their study design: class 1, randomized controlled trials; class 2, nonrandomized controlled trials; class 3, experimental studies; class 4, all other studies. Exercise programs have shown to decrease the risk of fall, and associated injuries. Hip protectors, safe landing strategy, and vitamin D intake were effective in reducing a risk and incidence of hip fracture during a fall. Furthermore, compliant flooring has also decreased hip fracture risk without affecting balance. An integrated approach combining exercise program, wearing a hip protector, teaching safe landing strategies, scheduled vitamin D intake, and compliant flooring installation, is suggested to address fall-related injuries in older adults.

Due to lack of established operating conditions, the swine manure management process circulates bio-liquor between the slurry pit and the bioreactor process cannot be effectively used yet. Therefore, a lab scale study comprising a single bio-reactor and slurry pit was conducted to investigate the optimal operating conditions. The main experiment was performed after conducting a preliminary study on the operating conditions. In the preliminary study, the volume ratio of the bioreactor to the slurry pit was fixed at 1 and hydraulic retention time (HRT) of the bioreactor was set as 5, 10 and 15 d. In the main experiment, the HRT of the bioreactor was fixed at 5 d based on preliminary results and the ratio of bioreactor to slurry pit was set at 1:3, 1:5, 1:7 and 1:10. Since, a decrease in bioreactor performance occurred when NH4-N loading rate reached 60 g/m3/d, the loading rate of NH4-N was required to be maintained below 55 g/m3/d to achieve stable operation. Although manure excretion can definitely increase the loading rate into the bioreactor as well as NH4-N concentration in the slurry pit, the NH4-N in slurry pit can be kept consistent with the circulation rate above 9.5Q (ratio to manure excretion). The optimal volume ratio of the bioreactor to the slurry pit and HRT of the bioreactor to fulfill these operating conditions was 1:3 and 5d, respectively. Notably, studying of the individual farm situation is very important to establish an ideal method to apply the optimal operation conditions suggested in this study.

관수장치는 이상기후로 인한 농업의 용수절감 대책에서 매우 중요한 역할을 하고 있다. 그러나 우리나 라의 관수장치의 개발 역사나 기술은 관수 선진국에 비해 70~80% 수준으로 추정된다. 관수장치의 성능 개선은 수출 확대뿐만 아니라 수입대체 효과에서도 매우 시급한 실정이다. 관수장치의 기술 개발은 경험적 방법과 이론해석에 따른 설계의 개선으로 상당 부분 가능하다. 그러나 경질 미로를 구성한 경우에는 비교적 실험과 이론적 해석이 잘 나타나지만 연질의 실리콘이 동시에 결합된 경우에는 실험적인 방법이외의 해석은 매우 어렵다. 본 연구에서는 국내 PC 드리퍼 성능을 선진국 수준으로 개선하고자 수행하였다. 주요 내용은 실리콘의 경도의 문제점과 개선, 경질 미로의 성형물 재설계, 이를 통한 새로운 PC 드리퍼를 설계 제작하였고, 동시에 성능 평가를 실시하였다. 또한 국내외에서 가장 우수한 것으로 알려진 Euro PC 드리퍼와 성능 비교를 수행하였으며, 동시에 핵심 부품의 교차 조립에 의한 유량의 균등성을 평가함으 로서 국내 PC 드리퍼의 근원적 기술의 문제점을 파악하고 개선할 수 있었다.