PURPOSES : The primary purpose of this study is to develop a framework for predicting the demand and distribution of pedestrians when an open space zone is built at the top through the undergroundization of the Gyeongin Expressway. METHODS : After analyzing the current status through a survey on the number of people, students, surrounding traffic volume, and future socioeconomic indicators, the rate of change in the floating population and the rate of increase and decrease in the traffic volume of pedestrians were calculated to evaluate the effect. In addition, microscopic analysis results were derived by setting a pedestrian analysis zone (PAZ). A walking environment index (WEI) was developed that can quantitatively evaluate the degree of walking activation by indicating walking-related surrounding environmental factors. Based on this, a walking demand prediction model was developed. In addition, the results were validated by calculating the walking volume through a micro-simulation in/around the open space zone. RESULTS : The number of crosswalks and schools, transit development indicators, and pedestrian volume increased as the WEI value increased. However, the log form of the distance was observed to be a factor that reduced walking. CONCLUSIONS : This study attempted to reliably predict the demand for walking on the Gyeongin Expressway by calculating the amount of induced walking and the amount of passing walking. The pedestrian demand can be boosted by improving walking environments.

This paper attempted to analyze the correlation between the risk image of the evacuees in the tunnel and the variables that affect the evacuation behavior due to the closed feeling. As to whether there is a difference in the level of recognizing the tunnel risk image according to the distribution of jobs, the null hypothesis was rejected at the significance probability of 0.002, so it can be said that the level of recognition of the tunnel risk image varies depending on the job group. In the distribution difference between gender and tunnel risk image recognition level, the significance probability was 0.012, indicating that the null hypothesis was rejected, indicating that the tunnel risk recognition distribution according to gender was different. As a result of analyzing the distribution difference between the tunnel's closed feeling and the tunnel risk perception level, the significance probability was 0.001, and the null hypothesis was rejected, indicating that there was a difference in the tunnel risk image level.

In general, fire accidents in tunnels are sufficiently preventable, but the damage is very large. Therefore, the number of highway traffic accidents is high in spring when spring fatigue occurs and the traffic volume for maple travel increases. In particular, when analyzing the cause of death of people killed in fire accidents in tunnels, it is analyzed that most of them are suffocated by smoke. Therefore, in this study, it can be said that it is meaningful to make a social contribution to reduce the number of traffic accident deaths by establishing an efficient fire suppression system for fire accidents in tunnels.

PURPOSES : The purpose of this study was to quantitatively evaluate the variability of LiDAR performance indicators, such as intensity and Number of Point Cloud(NPC), according to various environmental factors and material characteristics. METHODS : To consider the material characteristics of road safety facilities, various materials (Reference Material(RM), reflective sheet, matte sheet, granite, plastic, and rubber) were used in a darkroom, and the performance indicators of LiDAR were repeatedly measured in terms of changes in the measurement distance, rainfall, and angle of observation. RESULTS : In the case of standard reflective materials, the intensity measurement value decreased as the measurement distance and rainfall increased. The NPC showed a tendency to decrease as the measurement distance increased, regardless of rainfall intensity. For materials with high-intensity values, it was found that rainfall intensity and color had negligible effect on the change in intensity compared with the measurement distance. However, for materials with low-intensity values, it was found that the measurement distance, rainfall intensity, and color all had a significant effect on the change in intensity. CONCLUSIONS : For materials with high-intensity values, it was found that rainfall and color had negligible effect on change in intensity compared with the measurement distance. However, for materials with low-intensity values, the measurement distance, rainfall, and color all had a significant effect on the change in intensity value.

PURPOSES : The primary purpose of this study is to establish a crash probability model based on a statistical method that explains the relationship between regressor and explanatory variables using both fixed and random effects to control the heterogeneous characteristics of the observed data. In addition, an attempt was made to discover the leading cause of crashes by vehicle type, including passenger car, bus, truck, and trailer. METHODS : The levels of each route and day of the week are grouped using raw expressway crash data for 10 years from 2012 to 2021, and a multilevel mixed-effect logit model is constructed for each vehicle type assuming that the error terms are derived from the hierarchical structure of the group to which they belong. RESULTS : Speeding and obstacles on the road are significant factors that increase the probability of passenger car crashes, and bus crashes have a high rate at toll gates on weekdays. CONCLUSIONS : The multilevel mixed-effect logit model derived in the study has higher accuracy than the general logit model, confirming that mixed-effect analysis is plausible.

PURPOSES : The purpose of this study was to analyze the visibility of lanes according to the changes in the plane and longitudinal line of roads considering the horizontal and vertical diffusion angles of vehicle headlights at night. First, the visibility length of the lane was determined according to the plane linearity of the road such that it could be applied to simulation and visualization data. Second, the night vision length of the lane was established according to the longitudinal line of the road such that it could be applied to the simulation and visualization data. METHODS : In this study, each variable is first examined to consider the horizontal and vertical diffusion angles of the vehicle headlights. Second, the equation for the visibility of the lane by vehicle headlights in planar linearity is obtained, and the visibility of the lane is determined. Third, an equation is obtained for the visibility of the lane by vehicle headlights in longitudinal linearity. RESULTS : The results of this study are as follows. First, the visibility length of the lane in the section where the plane linearity of the highway existed at night was studied. In this case, the visibility length of the right and left lanes based on the vehicle decreased according to the plane linearity of the highway. Second, the visibility length of the lane in the section where the longitudinal line of the highway existed at night was investigated. In this case, the visibility length of the lane decreased according to the change in the longitudinal line of the highway. CONCLUSIONS : Considering the horizontal and vertical diffusion angles, the visibility length of the lane was determined according to the changes in the plane and vertical line of the road. It can be applied to simulation and visualization data. In general, the visibility length considering the spread angle of the vehicle headlights was shorter than the visibility length of the lane by the headlights; roads must be designed in consideration with the above result.

PURPOSES : Experimental findings pertaining to the mechanical properties of calcium aluminate cement (CAC)-based repair mortars incorporated with anhydrite gypsum (AG) are described herein. METHODS : To prepare the mortars, three different levels of AG were adopted and the ratio of water–cementitious materials was fixed at 0.50. For comparison, mortar composed of ordinary Portland cement was prepared. The fluidity, setting time, compressive and bond strengths, absorption and surface electric resistivity of the mortars were measured at predetermined periods. RESULTS : The incorporation of AG increases the fluidity but decreases the setting time of the CAC-based repair material system. However, the AG in the CAC mixes does not effectively enhance the compressive strength of the mortars owing to the decreased formation of CA hydrates, such as CAH10 and C2AH8. Meanwhile, the mortar with 10% AG shows excellence absorption. CONCLUSIONS : The mechanical properties of CAC based-mortars rely significantly on the amount of AG incorporated. However, further studies regarding the microstructure and durability of CAC-AG repair mortars must be conducted to obtain the optimal mixture.

PURPOSES : In this study, to improve the quality and construction performance of backfill materials for road excavation and restoration, the basic properties of rapid-hardening materials and stone sludge are analyzed to propose an optimal mix design. METHODS : To utilize rapid-hardening materials and stone sludge as controlled low-strength materials for pipeline construction in downtown areas, specimens were prepared for each compounding condition of fast-hardening materials. Flow, slump, and compressive strength tests were performed at various setting times. Subsequently, the physical and mechanical characteristics of the rapid-hardening backfill material for each mixing factor were analyzed. RESULTS : When ultrafast hardening cement and stone sludge are used, a setting time exceeding 30 min is required for a water–binder (W/B) ratio of 200% or higher. Considering the economic feasibility of ultrafast hardening cement, a W/B of 300% is considered the most suitable when high-performance superplasticizer and retarders are mixed. A flow test was performed on the rapid-hardening backfill material and the results show that if the mixing time exceeds 10 min, then the fluidity decreases rapidly, which necessitates a higher amount of superplasticizer. When ultrafast hardening cement is used, the initial strength (based on 4 h) is 0.7 MPa or higher for all formulations at a W/B ratio of 300%, and the compressive strength decreases slightly as the amount of superplasticizer is increased by 0.1%. CONCLUSIONS : Based on the fluidity and strength of the backfill material, which is composed of a rapid-hardening material and stone sludge, the most optimal performance is achieved when ultrafast-hardening cement with a W/B ratio of 300% is used in addition to a highperformance fluidizing agent 0.3% (wt./B) and retarder 0.2% (wt./B).

PURPOSES : In this study, the thermal conductivity properties and mechanical performance of a thermally conductive asphalt mixture that can be applied to increase the efficiency of deicing asphalt pavements are evaluated. METHODS : Graphite powder and carbon fiber, which are inexpensive carbon materials, were added to the asphalt mixture to its conductivity. To determine the optimal mixing ratio of the carbon materials, the dispersibility, thermal conductivity, and performance of the conductive asphalt mixture were evaluated. The performance of the mixture was evaluated in terms of its volume characteristics, Marshall stability, dynamic modulus, indirect tensile strength (IDT), and wheel-tracking tests. RESULTS : The thermal conductivity of the asphalt mixture containing 2% graphite is 1.81 W/mK, which is approximately twice (0.94 W/mK) that of a general asphalt mixture. Meanwhile, the graphite-added asphalt mixture indicates a much higher temperature increase rate than the general asphalt mixture, and its surface temperature after 60 min is 7.5 ℃ higher. In addition, it reaches 0 ℃ from -10 ℃ at a rate 1.5 times higher than that required by the general asphalt mixture. When both 2% graphite and 1% carbon fiber are added, the thermal conductivity improves to 2.03 W/mK, and the conductivity is similar at all locations of the slab specimen location, which indicates no dispersibility issue. The results of the mechanical performance evaluation shows that the higher the ratio of the carbon material, the lower is the dynamic modulus and IDT at 20 ℃, which decreases the crack resistance. Meanwhile, the results of the Hamburg wheel-tracking test at 50 ℃ show an improvement in the permanent deformation resistance. CONCLUSIONS : The results of the conductivity and performance evaluation show that the optimal ratio is the combination of 2% graphite and 0.5% carbon fiber. This suggests that the conductive asphalt mixture incorporated with carbon materials can efficiently transfer heat generated from the heating layer at the bottom of the pavement to the pavement surface.

PURPOSES : In this study, a system is investigated and developed to remove fog by injecting air onto a road using high-pressure air generated by turbo blowers installed on both edges of the road without using artificial chemicals. METHODS : A test device was constructed on a scaled road measuring 5 m long. A 225 kW class turbo blower was used to supply air. An air injection nozzle was installed to allow high-pressure air supplied from the turbo blower to be sprayed vertically from the edge of the road and horizontally from the surface of the road. Ten micro humidifiers were used to generate fog. RESULTS : Experimental results show that when ground fog occurs on the road, spraying air only in the vertical direction cannot effectively remove the fog. However, when vertical and horizontal nozzles are used simultaneously, both ground fog and flowing fog are removed effectively. CONCLUSIONS : A system for removing fog by spraying air jet is constructed, and fog is generated using a micro humidifier. Results from the fog removal performance test show that the system effectively removes fog.