검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 394

        163.
        2008.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        목적: 빛의 세기와 순목속도의 상관관계 및 빛의 세기에 따른 시력 회복시간의 차이 여부를 살펴보았다. 방법: 빛의 세기를 5단계로 구분하였으며 각 단계별로 순목속도를 측정하였고 일정한 시간동안 빛에 노출된 피검자들의 시력회복시간을 측정하였다. 결과: 피검사자 39명의 순목속도 평균은 빛의 세기별로 31.97±10.91~33.38±11.20 mm/s였고 빛의 세기와 순목속도는 유의한 상관관계가 없었으며(r=0.006) 소프트콘택트렌즈 착용 전과 착용 후의 순목속도는 유의한 차이가 없었다(p=0.351). 빛의 세기에 따른 시력회복시간을 분산분석한 결과 유의한 차이가 있었고(F=30.67, p
        4,000원
        164.
        2008.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        콘크리트 압축강도는 신설된 콘크리트 포장과 공용중인 콘크리트 포장의 품질관리 인자로 매우 중요하게 여겨져 왔다. 다양한 배합설계를 이용하는 실험실이나 도로포장 시공 현장처럼 동일배합으로 지속적으로 시공하는 경우에도 압축강도는 콘크리트의 강도 평가용으로 많이 제작하여 측정하고 있는 실정이다. 하지만 동일배합에 동일다짐을 한 압축강도 공시체라 하더라도 강도시험시 오차가 발생하는 것이 현실이다. 이는 수동으로 재하속도나 변위를 조절하는데서 기인한 압축강도시험 장비의 오차일수 있고 공시체의 편심으로 인한 강도차이 등으로 인한 오차가 발생할 수 있다. 또한 시공현장에서 동일한 배합의 재령별 압축강도를 매 시공때 마다 조사할 경우 수많은 공시체 제작이 필요하며 이에 따른 인력과 비용이 발생하게 된다. 이러한 반복적 압축강도 시험을 대체하기 위한 수단으로 비파괴를 이용한 압축강도 추정이 필요로 하게 된다. 본 연구에서는 다양한 비파괴 실험 방법 중에서 탄성파를 이용하였으며 그 중에서 구속조건에 따라 크게 영향이 없는 전단파 속도를 이용하여 콘크리트 압축강도를 재령별로 추정하였다. 그 결과 전단파 속도와 압축강도의 상관관계는 매우 우수한 것으로 나타났다.
        4,000원
        165.
        2008.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        다양한 탄성파 시험으로부터 획득할 수 있는 전단파속도(V_S)는 주로 지진공학 분야에서의 내진 설계 및 내진 성능 평가를 위한 대표적 지반 동적 특성으로 강조되어 왔다. 일반적인 지반공학적 부지 조사 기법의 지반지진공학적 활용을 목적으로, 표준관입 시험(SPT)과 피에조콘관입시험(CPTu)을 국내 여러 부지들을 대상으로 다양한 시추공 탄성파시험과 함께 수행하였다. 본 연구에서는 현장시험 자료들의 통계학적 모델링을 통해 전단파속도와 표준관입시험의 타격수(N 값)및 선단저항력(q_t), 주면마찰력(f_s)과 간극수압계수(B_q)로 구성되는 피에조콘관입 자료 간의 상관관계를 도출하고 전단파속도 결정을 위한 경험적 방법으로 제안하였다. 비록 일반적인 지반공학적 관입시험과 시추공 탄성파시험의 대상 변형률 수준이 상이하다 할지라도, 본 연구에서 제안된 상관관계들은 국내 토사 지층의 예비적 전단파속도 산정에 활용될 수 있을 것으로 보인다.
        4,000원
        166.
        2008.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Dynamic plastic deformation behavior of copper particles occurred during the cold spray processing was numerically analyzed using the finite element method. The study was to investigate the impact as well as the heat transfer phenomena, happened due to collision of the copper particle of in diameter with various initial velocities of into the copper matrix. Effective strain, temperature and their distribution were investigated for adiabatic strain and the accompanying adiabatic shear localization at the particle/substrate interface.
        4,000원
        167.
        2008.04 구독 인증기관·개인회원 무료
        168.
        2007.12 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The numerical simulations associated with the interaction of High Velocity Clouds (HVC) with the Magnetized Galactic Interstellar Medium (ISM) are a powerful tool to describe the evolution of the interaction of these objects in our Galaxy. In this work we present a new project referred to as Theoretical Virtual i Observatories. It is oriented toward to perform numerical simulations in real time through a Web page. This is a powerful astrophysical computational tool that consists of an intuitive graphical user interface (GUI) and a database produced by numerical calculations. In this Website the user can make use of the existing numerical simulations from the database or run a new simulation introducing initial conditions such as temperatures, densities, velocities, and magnetic field intensities for both the ISM and HVC. The prototype is programmed using Linux, Apache, MySQL, and PHP (LAMP), based on the open source philosophy. All simulations were performed with the MHD code ZEUS-3D, which solves the ideal MHD equations by finite differences on a fixed Eulerian mesh. Finally, we present typical results that can be obtained with this tool.
        4,000원
        169.
        2007.12 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        From the HCN observations of dense molecular cloud L694-2, Lee et al.(2007) determined internal distributions of density and velocity for the cloud. The density profile collaborates roughly with the Bonnor- Ebert gas sphere, but the velocity field departs significantly from the result of numerical simulations that are started from the BE sphere. Taking L694-2 as an example of collapsing clouds, we have performed a series of collapse simulations and determined initial configurations for the cloud in such a way that the resulting density and velocity profiles both match with the empirically deduced ones. Among many trial configurations the cloud which is initially uniform in density and bound by an expanding envelop depicts most closely the empirically obtained profiles of both density and velocity.
        3,000원
        170.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        천부지반에서 레일리파의 군속도와 위상속도 분산곡선을 역산하여 S파 속도구조를 구하는 방법을 비교하였다. 위상속도를 구하기 위해서 τ-p stacking 방법을 이용하였고, 군속도를 구하기 위해서 두 가지 방법, multiple filtering technique(MFT) continuous wavelet transform(CWT) 방법을 사용하였다. 고차모드가 존재하는 경우, 위상속도에서 기본모드와 고차모드를 분리하기가 용이하지 않았고, 군속도에서는 continuous wavelet transform 방법이 multiple filtering technique보다 효과적이었다. S파 속도 역산 결과, 위상속도와 군속도의 기본 모드만 역산할 경우, 신뢰구간의 깊이가 아주 얕았다. Continuous wavelet transform으로 구한 기본 모드와 1차 모드를 동시 역산할 경우, 신뢰구간의 깊이가 2배 이상 증가함을 알 수 있었다. 이는 1차 모드의 에너지가 더 깊은 층을 통과함으로 깊은 층에 대한 5파 속도 정보를 지니고 있기 때문으로 보인다. 위의 방법을 서해안 동호항의 조간대에 적용하여, continuous wavelet transform으로 구한 군속도의 기본 모드와 1차 모드를 동시 역산하여 S파 속도구조를 구하고, 해당 지역의 시추조사 결과와 비교하였다.
        4,200원
        171.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper is development of Surface Flow PIV for velocity measurement of surface flow. The new Velocity measurement method for surface flow using video-taped images is presented. Velocity distributions are calculated by the correlation method after the transformation of images to the non-distorted ones. The method to transform oblique-angled images to normal ones as well as its accuracy is discussed in detail. In this study, we carried out velocity measurement of an ocean current velocity distribution of saemangeum sea-wall model using Surface Flow PIV.
        4,000원
        173.
        2007.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The basic building block of solar filaments/prominences is thin threads of cool plasma. We have studied the spectral properties of velocity threads, clusters of thinner density threads moving together, by analyzing a sequence of Hα images of a quiescent filament. The images were taken at Big Bear Solar Observatory with the Lyot filter being successively tuned to wavelengths of -0.6, -0.3, 0.0, +0.3, and +0.6 Åfrom the centerline. The spectra of contrast constructed from the image data at each spatial point were analyzed using cloud models with a single velocity component, or three velocity components. As a result, we have identified a couple of velocity threads that are characterized by a narrow Doppler width (ΔλDÅ=0.27), a moderate value of optical thickness at the Hα absorption peak(T0=0.3) and a spatial width(FWHM) of about 1". It has also been inferred that there exist 4-6 velocity threads along the line of sight at each spatial resolution element inside the filament. In about half of the threads, matter moves fast with a line-of-sight speed of 15±3 km s-1, but in the other half it is either at rest or slowly moving with a line-of-sight velocity of 0±3 km s-1. It is found that a statistical balance approximately holds between the numbers of blue-shifted threads and red-shifted threads, and any imbalance between the two numbers is responsible for the non-zero line-of-sight velocity determined using a single-component model fit. Our results support the existence not only of high speed counter-streaming flows, but also of a significant amount of cool matter either being at rest or moving slowly inside the filament.
        4,900원
        174.
        2007.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study we present basic principles and features of RVI2CELL, a precise RV (radial velocity) estimation program to process stellar spectra obtained through iodine cell. RVI2CELL is very robust and fast program. The instrument profile can be modeled as a sum of Gaussian functions or a non-parametric arbitrary shape. The RV accuracy estimated by observation of a RV standard star Tau Ceti indicates about 9 m/s.
        4,000원
        175.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지음향 모델링은 해저지층을 통한 음파 전달과정을 모형하기 위해 발달해 왔다. 이러한 작업은 음파 전달을 제어하는 지층의 지음향 특성값을 측정 추론 예측한 값을 필요로 한다. 동해안 옥계와 북평지역 연안에서, 해저지층은 제4기층과 함께 제3기 퇴적층, 음향학적 기반암 등으로 구성된다. 옥계 연안지역 해저지층의 기반암은 주로 고생대 평안층군의 암석으로 해석되며, 이 암석의 평균 P파와 S파 속도값은 각각 4276 m/s와 2400 m/s이다. 북평 연안지역 해저지층의 기반암은 주로 고생대 초기 조선누층군의 석회암으로 해석되며, 이 암석의 평균 P파와 S파 속도값은 각각 5542 m/s와 2742 m/s이다.
        4,000원
        176.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        We present the result of radial velocity observation of a W UMa type binary star EX Leo. We observed the star on February 16, 2003, using Long-Slit spectrograph of BOAO(Bohyunsan Optical Astronomical Observatory). Since the spectral lines are broad due to its fast rotation, it is difficult to distinguish two radial velocities from cross correlation function. Instead of cross correlation function, we used broadening function to develop our own code which estimate the radial velocity of the broadened line spectra. With our own code, radial velocities of primary and secondary stars are derived simultaneously. From the radial velocity curve fit, we obtained K1=50.24±8.29km/s and K2=254.05±20.984km/s respectively.
        4,000원
        178.
        2007.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        미국 서부 지역을 근간으로 도출된 30m 심도까지의 평균 전단파속도(Vs30)는 부지 증폭 정도에 따른 설계 지진 지반 운동 결정을 위한 현행 지반 분류 기준이다. 부지의 Vs30을 산정하기 위해서는 현장탄성파 시험으로부터 적어도 30m 심도까지의 전단파 속도(Vs) 분포를 획득해야 한다. 그러나 많은 경우에서 현장의 불리한 여건 및 적용 시험 기법의 제한으로 인해 Vs분포 결정 심도가 30m에 이르지 못할 수 있다. 본 연구에서는 국내 총 72개소 부지들에서 다양한 탄성파 시험 수행을 통해 30m 이상 심도까지 Vs 분포를 획득하여 Vs30과 30m보다 얕은 심도까지의 평균 전단파속도(VsDs)들을 산정하고, 이로부터 Vs30과 VsDs간의 상관관계를 도출하였다. 또한, 모든 Vs 분포 자료의 평균에 근거한 형상 곡선을 작성하여 Vs 분포를 얕은 심도부터 30m까지 외삽할 수 있는 기법을 개발하였다. 얕은 심도 Vs 분포로부터의 Vs30 산정을 위하여 VsDs와 형상 곡선을 이용하는 두 기법은 최하단 Vs를 30m 심도까지 동일하게 연장하는 단순 기법에 비해 편향 정도가 적었으며, 특히 최소 10m 이상 심도까지 확보된 Vs분포의 경우 유용하게 적용될 수 있을 것으로 보인다.
        4,500원
        179.
        2007.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This fundamental studies on for the productivity improvement and laborsaving of purse seine fishery. Given the difficulty posed from the distortion of net shape caused by the external forces, such as tide, at the time of shooting and pursing, we set the 4 steps of 0, 2, 4 and 6cm/sec in flow velocity in the flume tank for the experiment in order to examine those characteristics. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, and interpreted the characteristics of several motion in water, such as the shape of seine, the change in tension and area during pursing and its the analysis results are as follows. Though the experiment could be conducted up to 6cm/sec of flow velocity that was defined, the experiment could not go on because of the severe distortion in the seine at the flow velocity in excess of 6cm/sec. As for the depth of leadline and reduction rate of side area of seine when the pursing is connected, P seine turned out to be slightly higher than T seine, and the hauling speed and reduction rate of upper area of seine were found similar to each other. The correlation between the hauling time (Ht) and depth of lead line (Dhp, Dht) of P seine and T seine can be expressed by the equation, that is, Dhp=(0.99Pt-7.63)Pt+69.01, Dht=(1.03Pt-7.73)Pt+66.74. The correlation between the hauling time and hauling velocity (Hpp, Hpt) can be expressed by the equation, that is, Hpp=-0.06Ht2+0.88Ht+0.78, Hpt=-0.05Ht2+0.81Ht+0.98 here, Pt is pursing time. And the correlation between the pursing time and the reduction rate of side area (sArp, sArt) can be expressed by the equation, that is, sArp=-0.48Pt2+14.79Pt-16.74, sArt=-0.45Pt2+14.56Pt-16.48. The reduction rate of upper area of seine (tArp, tArt) can be expressed by the equation, that is, tArp=0.34Pt2-0.66Pt-0.74, tArt=0.34Pt2-0.27Pt-1.80. In addition, the correlation between the pursing time and tension of purse line (Tep, Tet) can be expressed by the equation, that is, Tep=2.79Pt2+2.26Pt-0.60, Tet=2.14Pt2+8.08Pt-27.50.
        4,900원
        180.
        2007.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        It is the basic studies for productivity improvement and laborsaving of purse seine fishery. Because the seine shape is apt to be transformed in seine shooting process due to the effect of tide, this study is intended to establish 4 steps, whose flow velocity are 0, 2, 4 and 6cm/sec, in flume tank and perform the experiment to review the character. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, analyzed of the sinking movements on the two seines and its results are as follows. In the setting over the flow velocity 6cm/sec, experiment was impossible because of flying and transformation of seine were severe. The sinking movements of P seine and T seine generally showed linear phenomenon and the sinking speed showed gentle curve shape. Sinking tendency was distinguished by existence of flow velocity. When there is flow velocity, it showed the phenomenon that it sinking by similar type. Although sinking depth and sinking speed did not show distinguished classification, P seine shows bigger than T seine. When there was in flow velocity, the elapsed time(Et) and sinking depth (PDp, TDp) of P seine and T seine can be shown such experimental equations as PDp=(0.21V+4.96)Et-(0.62V-0.10) and TDp=(0.19V+4.95)Et-(0.72V+0.34). When there was in flow velocity, the elapsed time and siking speed (PSp, TSp) of P seine and T seine can be shown such experimental equations as PSp=-0.11Et2+1.42Et+1.75 and TSp=-0.11Et2+1.41Et+1.37.
        4,200원